How to “recondition” the Lithium-Ion battery-pack.
The following process can be used to “recondition” any intelligent Lithium-Ion battery-pack including those used in the VERUS, VERDICT, VERUS Wireless and VERUS PRO. Depending how many “valid” recharge cycles the battery has gone through, it should be somewhere between 80% and 100% of its original capacity once reconditioned.
Step One: Verify that the battery is completely charged
-
Plug the AC charging cable into the unit, thereby beginning the charging cycle to the battery
-
Leave the system charging overnight, or for at least 8 hours
Step Two: Verify that the battery is completely discharged
-
If not already, install the battery in the platform and power it on
-
Disconnect all other power sources including the AC charging cable
-
Leave the product powered on overnight, or until the software powers off the unit
-
DO NOT turn the platform off, even if the system warns that the battery-charge is “low”
Step Three: Recharge/Recondition the battery pack
-
Once the software powers off the unit, which indicates the battery has been completely discharged, plug the AC charging cable into it, thereby beginning the battery charging cycle
-
Leave the system charging overnight, or for at least 8 hours
Once the battery has been fully charged it has been reconditioned.
Replacement Battery Part Numbers:
VERUS – EAA0354L12A
VERUS Wireless – EAA0354L12A
VERDICT D7 6-CELL – EAA0365L06A
VERUS PRO D10 6-CELL – EAA0365L06A