Did you know that even replacing a windshield on a vehicle today means sensors need to be reset? In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to perform a reset of a BMW rain sensor using a scan tool.

Auto ID, One Touch Full Vehicle Code Scan, and One Touch Code Clear. Vehicle: 2013 BMW® X3. Want to save time getting to the root of a diagnostic problem? In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to use some time-saving features to check a 2013 BMW® quickly.

When you change wheels and tires to a different size, how does that affect the Tire Pressure Monitoring system? There may be a programming function available to help. In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to program new tire pressure thresholds on a Jeep using a scan tool. | Vehicle: 2015 Jeep® Grand Cherokee

Have you ever had trouble with the Variable Valve Timing system on a newer Chrysler® vehicle? There is a functional test available to help. In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to perform the automatic system cleaning using a scan tool. | Vehicle: 2015 Jeep® Grand Cherokee.

Did you know that many modern HVAC systems have built-in automated tests to make diagnosing issues easier? In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to use the Chrysler automated HVAC test on a scan tool. | Vehicle: 2014 Jeep Compass.

Have you ever had to replace a module on a vehicle, only to find out it needed to be "relearned" to the vehicle? In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to perform a Proxi Alignment on a FIAT using a scan tool. | Vehicle: 2015 FIAT 500

When diagnosing a vehicle, running a pre- and post-scan prior to diagnosing the vehicle issue is a very helpful tool. You'll see what diagnostic codes appear prior to servicing the car and afterwards you can run another scan to ensure the codes are cleared.

Have you ever had trouble with the electrical system on a newer Ford? It's possible the Battery Monitoring System needs to be reset. In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to reset the system using a scan tool.

Have you ever needed to program a set of keys to a vehicle? In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to program keys on the Ford PATS System using a scan tool.

Sometimes you need to use a factory level test to finish a job. In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to use the Ford Misfire Monitor Neutral Profile Correction functional test to finish the job on a Ford Fusion. | Vehicle: 2014 Ford Fusion.

Are you having trouble on how to identify engine cylinder misfires? With the ZEUS+™, you won't have to worry as it comes with an easy-to-use Misfire Analysis feature as shown on a 2013 Ford® F-150 in partnership with Motor Age. Take a look!.

Flash reprogramming is often a necessary part of repairing vehicles nowadays, but the process can be intimidating if you aren't sure how to do it. In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to reflash a Ford® PCM using a Pass Thru Pro III and Ford® J2534 software. | Vehicle: 2014 Ford® Transit Connect.

In under a minute you can see how to use your Snap-on car diagnostic tool to do a lane departure calibration on 2013 & newer Fords.

Having a hard time diagnosing a Ford with a misfire? In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows a faster way to check Ford ignition coils using a lab scope to perform a Coil Current RFI Test. | Vehicle: 2013 Ford Fusion.

You may know how to do a relative compression test with a lab scope, but did you know that most late-model Fords can also perform this test as a scan tool function? In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to perform this test using a scan tool. | Vehicle: 2015 Ford® Escape.

Transmission repairs can be tricky, and can require taking a lot of things apart simply to find a part number. In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to easily find what transmission solenoids are installed on a Ford without having to take the transmission apart - by using a scan tool. | Vehicle: 2012 Ford F250.

Tire Pressure Monitoring Systems on modern cars often need a special tools and procedures to repair them, don't they? In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to reset the TPMS system on a Ford® Transit Connect using a scan tool. | Vehicle: 2014 Ford® Transit Connect.

If you suspect a fuel injector is faulty on a direct injection engine, how do you diagnose it quickly? Many late-model Ford direct injection vehicles can be tested with a special test. In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to perform a Relative Injector Flow test using a scan tool. | Vehicle: 2015 Ford® Escape.

Did you know that when you replace a fuel injector on many diesel vehicles, the part needs to be coded into the vehicle's computer? In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to perform the injector coding function on a Ford diesel using a scan tool.

Did you know that the fuel injectors on Direct Injection vehicles work differently than a standard fuel injector? Because of this, a lab scope pattern may not look like what you may be used to. In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to hook up and perform a signature test on a Ford EcoBoost® motor.

Would you like an easy way to monitor data during a road test? In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to use the PID Trigger function as a "babysitter" for your road test. | Vehicle: 2014 Ford® Fusion

Having a hard time figuring out whether or not an ignition coil is bad? In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to use a low amps probe to perform a current ramp test. | Vehicle: 2013 Ford® Fusion.

Having a hard time diagnosing an ignition issue? In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows an easy way to check ignition systems using a lab scope and SIA 2000 ignition probe. | Vehicle: 2001 Ford® Taurus.

Recalibration has become a standard process for all sorts of simple repair procedures. In this Quick Tip, Jason Gabrenas will show you how to perform a recalibration on a functional test, like a wiper motor module calibration on a 2018 Ford® Focus®.

Just removed or replaced the bumper on a 2010 or newer GM model? Make sure to recalibrate the rain sensor module - our short Diagnostic Quick Tip shows you how.

If you’re looking how to replace brakes pads safely on a vehicle, we’ll show you how. National Field Trainer, Jason Gabrenas, will show you how to use the ZEUS+™ scanner on the 2018 Chevrolet® Equinox.

Learn how to relearn the brake pedal position sensor on a 2018 Chevrolet® Equinox. The brake pedal position sensor (formally known as the brake light switch), provides data to multiple modules in a car and when replaced in a GMC® vehicle, needs to be relearned in two modules (engine control and body control module). Find out how with National Trainer, Jason Gabrenas.

Many hybrid vehicles have a separate electric coolant pump that needs to be turned on to help bleed the cooling system. In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to perform a coolant system bleed on a Chevy Volt.

If you have a problem with a gauge cluster, how can you quickly figure out if it's a cluster problem or a sensor? In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to perform some bi-directional functional testing on a Harley-Davidson using a scan tool.

If you or your customer loses a key fob, that can be pretty inconvenient, right? They usually need to be programmed to the vehicle. In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to program a Harley-Davidson key fob using a scan tool. | Vehicle: 2015 Harley-Davidson Ultra Limited.

No need to be a detective with Snap-on® exclusive Harley-Davidson® factory coverage that lets you know the mileage at which a code was set… important for diagnosis and insurance claims, too!

Vehicle: 2015 Harley-Davidson Ultra Limited. Many vehicles now need a scan tool in order to bleed the brakes after ABS repairs. In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to perform an ABS Brake Bleed procedure on a Harley-Davidson using a scan tool.

Need to replace brake pads? Your diagnostic tool with the latest software has brake pad coverage for 2003 and newer Honda vehicles.

Car doesn't start because the key doesn't work? Reprogram the key with the latest Snap-on Software

Many modern vehicles have built-in enhanced safety systems, such as blind spot detection. When you do any work on these systems, a reset or recalibration needs to be done. In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to perform a reset on the Hyundai® Blind Spot Detection system using a scan tool. | Vehicle: 2014 Hyundai® Santa Fe.

Most modern vehicles have a built-in Occupant Detection System. When you do any work on these systems, a reset or a recalibration needs to be done. In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to perform a reset on the Hyundai® PODS system using a scan tool. | Vehicle: 2014 Hyundai® Santa Fe.

Having a hard time diagnosing a fuel delivery problem? In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows how to quickly verify the condition of a fuel pump, using a lab scope and amp probe with a ZEUS+™ on a 2011 Huyndai® Tuscon.

Need to do a DC Voltage Test? Find the fault quickly and get on with the fix. Learn how in less than 60 seconds.

How do you replace an electronic parking brake when there’s an electric motor holding the brake pads together? Often times, on an electric vehicle, you need to put the car into maintenance mode in order to release the caliber and change the brake pads. National Field Trainer, Jason Gabrenas, will show you how to change the EV parking brake using a diagnostic scanner, ZEUS+™. 2020 Jaguar® I-Pace EV

Check out the EV Functions on a ZEUS+™ Snap-on scan tool. You’ll be prepared when an electric vehicle enters your shop, as they’re rising in popularity. National Field Trainer, Jason Gabrenas, will show you electric vehicle scan tool functions on a 2020 Jaguar® I-Pace EV.

Finish the job quickly and confidently using your Snap-on diagnostic tool with the latest software. Automation, plus valuable tips and procedures makes this reset unbelievably fast and simple.

Have you ever had to replace a battery on a MINI® or BMW®, only to find out that the vehicle was not charging properly afterwards? In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to relearn the system after a battery replacement using a scan tool.

Replacing an ECM? In less than 60 seconds this video shows you how to program the VIN into the replacement ECM to ensure the engine starts.

Having more information is never a bad thing when diagnosing a vehicle. In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows how to view multiple freeze frame points on Toyota vehicles using the multiple freeze frame feature.

From fuel injectors to transmissions, many parts on newer cars need be to coded to the vehicle in order to complete a repair, don't they? In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to perform a transmission coding procedure on a Toyota® RAV 4 using a scan tool. | Vehicle: 2015 Toyota® RAV 4.

Many EVAP system problems can be difficult to test on some vehicles due to how the system is set up. In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to force an EVAP System test on late-model Toyota vehicles using a scan tool.

Check the condition of the alternator (as scope function) by doing the Alternator Ripple Test. National Field Trainer, Jason Gabrenas, will show you how to diagnose vehicle electrical issues using a ZEUS+™ on a 2018 Toyota®.

Having a hard time with hybrid vehicles? In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to use the built-in Troubleshooter tips to fix a no-start condition. 2006 Toyota® Prius

Having a hard time resetting a service light on a VW® or Audi® vehicle? In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to use VW®/ Audi's® Flexible Service Reset function.

Modern Air/Fuel Ratio Sensors can be difficult to test and inspect. In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to test and inspect an A/F sensor using a scan tool.

Have you ever run into a situation where you needed to check a vehicle’s timing quickly and easily? In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to check timing using a lab scope and performing a multi-channel cam/crank correlation test.

Having a hard time diagnosing a no communication or vehicle network issue? In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to locate the source of the problem, using a lab scope to check the CAN network system.

Having a hard time diagnosing a no communication or vehicle network issue? There are many different types of networks in modern vehicles. In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to use a lab scope to check the Flex Ray bus network system.

Is Ethernet/DoIP communications a need for you?
Ethernet for diagnostics or “DoIP” uses Ethernet frames to package diagnostic messages, which communicate with a vehicle based on standardized communications protocols increasing interconnection between vehicles and their environment.

Electronic Throttle Control systems on newer cars can be tough to diagnose if you don’t know what to look for. In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to check the sensors on Electronic Throttle Control systems using a lab scope.

Having a hard time diagnosing a faulty fuel injector? In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows how to get a certain diagnosis using a lab scope to check both voltage and amperage.

Not sure how to do a particular test with your lab scope? Did you know there are built-in training classes within a Snap-on lab scope? In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to access the Top Level Menus inside the Guided Component Tests.

Having a hard time figuring out whether or not an ignition coil is bad? In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to compare both the voltage and the current of an ignition coil to find a problem quickly.

There are many different options out there for testing vehicles with Coil-On-Plug ignition systems, aren't there? In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to set up and use the universal flag pickups.

Having a hard time figuring out whether or not an ignition coil is bad? In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to perform a primary side voltage test to quickly test a coil.

Have you ever had a vehicle come into the shop with an issue, only to find out that any codes were cleared somewhere else? In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to find those cleared codes using OBD-II mode 10.

An oil change is probably the most common task in a shop, but how much time is spent looking up fluid capacities and specs? Then once the oil change is done, how do you reset the maintenance light? In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows

Having a hard time diagnosing misfires due to a compression issue? In this Diagnostic Quick Tip, National Field Trainer Jason Gabrenas shows you how to find the problem cylinder using a lab scope and amp probe to perform a Relative Compression Test.

See how easy it is to view a component's scope pattern compared to processed scanner data at the same time on your auto scanner tool. In this Diagnostic Quick Tip, National Field Trainer, Jason Gabrenas, shows you how to use the multi window functions on a ZEUS+™ to make that happen..

See the advantage of using your tool with its split screen capabilities. Previously in our Dual Screen Diagnostics Scanner vs Scope Quick Tip video we showed you how to use screen-in-screen with scope and scanner data. Today learn how to go one step further to multi-task and save time with split screen for scope and functional tests.

When diagnosing a vehicle, running a pre- and post-scan prior to diagnosing the vehicle issue is a very helpful tool. You'll see what diagnostic codes appear prior to servicing the car and afterwards you can run another scan to ensure the codes are cleared.

ShopStream Connect is a Windows®-based Snap-on software application that helps keep you and your diagnostic tool productive and profitable every day.

ShopStream Connect is a Windows®-based Snap-on software application that helps keep you and your diagnostic tool productive and profitable every day.

Watch this 1 minute video to see how easy it is to perform a software upgrade for your subscribed APOLLO-D8™, TRITON-D8®, MODIS™, SOLUS™, P1000™ or ETHOS® using ShopStream Connect™.