VIDEO TRANSCRIPTION
SureTrack® Expert Information
Wi-Fi Set Up
The SureTrack expert information system is available using the Wi-Fi built into every SOLUS Edge tool. A current software upgrade is required. SureTrack provides more complete information than hotlines and more reliable results than online forums, because it gives you real fixes and verified parts replacement records, harvested from successful repair orders.
SureTrack features:
- Common Replaced Parts Graphs showing successful fixes
- Expert information hot-linked directly from diagnostic trouble codes
- Exclusive insight based on experience from millions of repair orders
- Definitive, reliable answers, validated by SureTrack expert technicians
SOLUS Edge Home Screen
Before you begin using SureTrack, you must turn on the Wi-Fi and select a wireless network connection. To begin, select Tools from the Home Screen.
Tools and Setup Screen
Next select Settings
Settings Screen
Select Configure Wi-Fi.
Wi-Fi is Off
If the screen displays a message “Wi-Fi is Off”, select the Wi-Fi Power icon to turn the Wi-Fi on. The Wi Fi power icon will change from a green check mark icon to a red “X” icon indicating Wi-Fi radio is currently set to on.
Wi-Fi Configuration Screen
Select your desired network connection. Use the scroll feature to show all active connections.
Enter Network Password Screen
If the network is password protected, a keyboard will appear. Simply enter your network password.
Wi-Fi Summary Screen 1
Select Connect to connect to your desired network
Wi-Fi Summary Screen 2
From the Connect confirmation screen select OK to continue using this connection or Forget to disconnect this connection.
Wi-Fi Configuration Screen
The screen will change to display your network connection highlighted with a status message of “Connected” and an indicator showing the current Wi-Fi signal strength. You are now ready to access the power of SureTrack.
If you are experiencing network connection issues, an automated feature is available to quickly test your network connection. Before you start the automated testing procedure, turn off the diagnostic tool and turn it back on. This clears previous testing messages from memory. Then, connect to your desired network.
From the Wi-Fi configuration screen, select the Wi-Fi Test icon to open the network connection test screen. The network connection test is an automated test that begins when the screen is displayed.
Testing Network Connection
Network connection systems are tested in sequence and display a status indicator. Red indicates that the test failed. Green shows that the test completed satisfactorily.
If a connection issue is present, select View Summary to review the results.
Summary Screen
The summary information is helpful if you are experiencing difficulties with your connection. Scroll through the summary information to review the test results for each system and Tip messages for the current connection issue.
Main Menu (Engine)
Codes Menu
Engine Codes Menu
All Powertrain Codes
Let’s see SureTrack in action. From the home screen, select Scanner, then Demonstration. Follow the prompts to select the demonstration vehicle.
Select the Engine system and Codes Menu. Select Display Codes to see the fault codes for the demonstration vehicle. To see SureTrack results, simply select a code from the code results. And select the arrow at the top to open the SureTrack dashboard.
SureTrack Dashboard
The initial Dashboard screen displays the Common Replaced Parts Graph for the current fault code. Both the Real Fixes and Related Tips are available from this screen.
All Powertrain Codes
SureTrack Results for P0101 Screen
The Common Replaced Parts graph is displayed by selecting the arrow located to the left of the title bar. The Common Replaced Parts graph shows the percentage of verified fixes derived from the total number of repairs by mileage, using the parts listed.
The graph may display one or more replacement parts based on repair order history. This example shows a common replaced part for DTC P0101. The Mass Airflow Sensor is the most common replaced part based on 535 repairs involving vehicles with up to 200,000 miles. From the graph it can be determined that the majority of the repairs were made to vehicles with 100,000 or more miles, with just over 20% at 100,000 miles and approximately 11% at 150,000 miles.
Real Fix
Selecting the Fix It! icon will display the most common RealFix for the current DTC that has been obtained from actual shop repair orders and is presented in a Complaint, Cause, Correction format.
Related Tips
Selecting the Related Tips icon will display a list of Related Tips. These are tips that may be related to the current DTC and have been obtained from actual shop repair orders. Selecting an item from the list opens additional details about the Related Tip.
Related Real Fixes
Selecting the Related Real Fixes icon will display a list of Related Real Fixes. These fixes may be related to the current Diagnostic Trouble Code and have been obtained from actual shop repair orders. Selecting an item from the list opens additional details about the Real Fix in a Complaint, Cause, Correction format.