How to check for, download and install Service Releases using ShopStream Connect on SOLUS PRO
IMPORTANT: An uninterrupted power source to the diagnostic tool is crucial during an update, as any loss of power may damage the tool and render it inoperative. Therefore, use of the AC/DC Power Adapter and a battery with at least 20% charge is required. The Type A to Mini B USB cable is also required for this process.
-
Download and Install ShopStream Connect on your PC
-
Power on the SOLUS PRO unit
-
From the main menu select Utilities (wrench icon), then Connect to PC
-
Press the Y button to continue, the tool will reboot, "SOLUS PRO is now in CONNECT TO PC mode.” Will be displayed on the screen.
-
Connect the SOLUS PRO to the PC, Mini B end to the SOLUS PRO and Type A end to the PC
-
Launch the ShopStream Connect software on the PC
NOTE: If an update window opens automatically skip to step 10
-
Access the Tools menu
-
Select Update Software
-
Select SOLUS PRO from the list at the right
-
When the ShopStream Connect Update Manager box appears, select Next
-
If an update is found select Download
-
Once the download completes select Install
-
Once the install is complete, or no update is available, select Finish
-
Disconnect the SOLUS PRO from the PC
-
Press the power button, the SOLUS PRO will reboot
The SOLUS PRO will now start to install the downloaded service update on the tool. The update is automatically installed when you power on your diagnostic tool, and is complete when the main menu displays.