Automotive - Specialty ShopDave StuckelManager/Lead Mechanic at HYMAN LTD. CLASSIC CARSFestus, MissouriI got into the industry because my father was building hot rods in the garage. Now I've worked for 35 years. My advice to others would be to pay attention and listen a lot.
Public WorksJessica SwearingenStreet Maintenance LaborerNorth Branch, MinnesotaI wanted something new and exciting in my life with lots of variety. Working in street maintenance for public works allowed me the variety that I needed in my life. It's long and hot days, but rewarding.
Automotive - DealershipBryan MendezService Technician at Porsche MarinNovato, CaliforniaMy journey into becoming an automotive service technician started in an unexpected place: the Army. Right after high school, I enlisted and was assigned to work as an M1A2 Abrams tank mechanic. At first, I didn’t know much a... read more CarpenterAustin GillmanJourneyman Bridge Builder at Skanska USALake Elsinore, CaliforniaMy friend was a bridge builder and it sounded right up my alley, so I joined the carpenters union and never looked back. I learned everything there is to do with bridges and highway construction and was able to start my own ... read more Oil & GasTrent BushHeavy Assembly Lead at NOVHouston, TexasI have been a Maker and Fixer since I was about 16, so a long long time. My father inspired me - a good man, mechanically minded, helpful, and pretty patient. He replaced two blown transmissions in the same truck for me. He ... read more Fleet MaintenanceDelvin IshmanSchool Bus Driver / Technician Apprentice at BhamCityBirmingham, AlabamaI have been a Maker/Fixer all my life! But within the last 5 years or so, I’ve taken under the wing of some of the most awesome mechanics and technicians on Earth. This team can do it all! Gas, diesel, propane; name it! In t... read more Automotive - DealershipJack WatsonHyundai Technician at Oxmoor HyundaiLouisville, KentuckyMy uncle who has been working on cars since he was 8 taught me everything I know. He inspired me to work on cars when I started trying to do my first oil change on my first car a 1996 Nissan Maxima. I’m 28 now, and I’ve been... read more Automotive - General RepairDaniel MeineckeTechnician at Hopson Auto RepairWaukesha, WisconsinI have been a maker and fixer my whole life, growing up a 3rd generation automotive technician. I had to fix my own 4-wheelers when I was a little kid, otherwise I wasn’t able to drive them! My grandpa played a big part in m... read more ManufacturingMark LePoreSupervisor at TELTRU MANUFACTURINGSpencerport, New YorkSince I was a kid, I was always tinkering, building, and fabricating. My father worked for Kodak and was always fixing things for me and my 3 brothers. He always has a way of making something work, whether it is repairing, f... read more ManufacturingMichael SanchezMachinist/Fabricator/Quality Control at Tel-Tru Manufacturing/Wilbert's Premium Auto PartsHenrietta, New YorkMy friends and family all know me as a tinkerer. I've always been interested in working with my hands and fixing everything I could get my hands on. One piece of advice I would give my past self or to others is to get into t... read more RacingBrandon LamTransportation Specialist at Team PenskeMooresville, North CarolinaI’ve been a maker and fixer my whole life. Something I would tell others looking to get into this line of work is that your name is tied to the work you put out. When you see a project that turns out stellar, people associat... read more Technical Education - students and instructorsDave UnderwoodStudent TechSpokane, WashingtonGrowing up I was a fisherman. I started at a very young age in that industry. But my grandfather, Clifford Jackson, was an enthusiast of anything with an engine. Being a former pro-NHRA drag racer, a heavy equipment operator... read more RacingJustin MooreJunior Mechanic at Team PenskeCharlotte, North CarolinaStay focused and take in as much knowledge and advice that you can from everyone that is willing to give it. There are no dumb questions. I come from a family of mechanics, but my uncle took me under his wing at his shop one... read more RacingChris PuskasEngine Tuner & Rear Suspension Mechanic at Team PenskeMount Ulla, North CarolinaFor essentially my entire life, I've been making and fixing. I grew up on a dairy farm in New Jersey and started racing at the age of 8. Here I am 26 years later, working for Team Penske and living the dream! I would tell so... read more Contractor, Renter, Flipper, Caregiver.Cynthia KarelsOwner at Be Positive LLCMoorhead, MinnesotaAll my life, I was taught by the best: my dad, and then I went to school to learn more. I learned about vehicle engines as an infant. I was strapped to a skateboard with the ice cream pails washing parts in the bucket. Then ... read more Automotive - General RepairHailey PattersonTIG WelderIndianapolis, IndianaI have been TIG welding on and off for about 4 years but in this last year, I have taken it more seriously and wanted to expand my knowledge! My love for cars started when I was little and I would work on things here and the... read more Heavy Duty Truck RepairPeyton FedlerShop Hand at Henderson Heavy HaulFruita, ColoradoI started fixing my car a couple of years ago, it started an addiction. I can never be satisfied except by completing a hard job on a vehicle. I love creating new things and making engines run better, anything from a Honda 3... read more Flag Pole Repair and RestorationJonathan SchaudtOwner at K&D Family & Group LLCLake Zurich, IllinoisI've been thinking up ideas for tools for a very long time. My mind is always running. My first tool I made was while I was working for a tree company. We had a wood chipper that was going through bearings over and over, and... read more Aviation/AerospaceDestiney CasanovaCollege Student at Texas State Technical CollegeHarlingen, TexasStay focused, don’t ever give up, and give it your all. For all my life I never knew what I wanted to do, I was always lost switching from subject to subject. Then I came across aviation, and I fell in love with it. I’ve alw... read more Automotive - General RepairAnthony HarlinAutomotive Technician Gas/Diesel Master Tech at University AutomotiveMather, CaliforniaAdvice to new techs: take every training class you can, listen to every bit of advice you can get, and always keep your eyes and ears open for new ideas. Do not go out and buy the most expensive tools or boxes, there are a l... read more ManufacturingJohn MuigaiManufacturing Engineer at Edwards VacuumChandler, ArizonaI guess I started when I was young, but I went to school for engineering and have been tinkering about most of my life. My advice is to start now with whatever you have. The biggest limit is usually yourself. I started as a ... read more Aviation/AerospaceDominick MadridAircraft TechnicianLas Vegas, NevadaI’ve done skilled labor for the past 9 years! I started by joining the Air Force in 2015 since I knew it would set my future up with a marketable skill. I’ve always wanted to be handy and fix things in general but I never fo... read more Aviation/AerospaceMichael WallaceAvionics Electrical Technician First Class at U.S. Coast GuardHuntsville, AlabamaI grew up in Huntsville, AL and I knew I needed to get out of there for a little bit. I had never heard of the Coast Guard, but I went to go check the other services, the Coast Guard recruiter was there and he managed to tal... read more Aviation/AerospaceDarius GambleWSUTech Student/AMC CompetitorWichita, KansasI came to AMC because being an AMT student at WSUTech, I'm taking advantage of the opportunities and experience offered by the event, and opening up and being able to know that the aviation world is so large. I am networking... read more Auto Body/Collision RepairKaden RobertsSkillsUSA ParticipantRoberts, MontanaI am in the autobody industry because I have a passion for art and painting cars is a very cool and challenging art project!
Automotive - General RepairShelby MathesSkillsUSA ParticipantWaterloo, IllinoisThe reason I chose my career cluster was because my parents own two automotive shops and I have been included with them since I was really young and I have always loved working with my hands and I love to figure things out.
Heavy Duty Truck RepairRusty BraggSkillsUSA ParticipantCastle Rock, ColoradoI chose chose my career cluster because my dad was a mechanic and that's what made me get into the field.
ManufacturingJayden BetancourtSkillsUSA ParticipantCaldwell, IdahoI chose my career cluster because of the benefits of the trades. Mick Bell taught me everything I know.
Automotive - General RepairCole VogtSkillsUSA ParticipantNorfolk, NebraskaI like Automotive Technology because it gives me useful skills that I can use for the rest of my life in multiple fields.
Technical Education - students and instructorsClaude TownsendProgram Coordinator at Oakland Community CollegeAuburn Hills, MichiganCurrently, I work as a program coordinator and full-time faculty at Oakland Community College in the automobile servicing program. I've been doing this here for almost nine years. I used to work as a career tech center teach... read more RacingHunter AhrendtFront & Rear Assembly at AJ Foyt RacingIndianapolis, IndianaMy name is Hunter, and I build and assemble all the front and rear wings for the racecar at AJ Foyt Racing. I love it. I’ve only been doing this for a few months, I started right before the season started! I’ve been into car... read more Aviation/AerospaceEric RandleSenior Aviation Airframe & Powerplant (A&P) Technician at FedExSan Antonio, TexasI have been at it for 35 years. After a year of college, I joined the Navy. After serving 6 years, I returned to my hometown and got hired on at FedEx. Pick a career doing something you like. Put in the extra effort in your ... read more Transportation, Distribution & LogisticsHunter ElamStudentMorton, IllinoisI decided to become a field tech because of my parents' farm, I’m always working on equipment. I have a great mechanic job, no debt from school and I recently graduated from high school.
Automotive - General RepairBrittni SpeckerInstructorBuckeye, ArizonaI originally started working on my truck in high school because I wanted to know how to do it myself, I was always a hands-on learner. I was told by my high school counselor that I was not allowed to take auto class. So, as ... read more Heavy Duty Truck RepairLiam ClarkStudentMoab, UtahI am inspired by a family friend who owns a diesel shop. We work on lots of F-350s with the 7.3, and lots of old Mercedes 300 and 240DS.
Architecture & ConstructionBrycen McLaurinStudentGrand Prairie, TexasI chose this industry in high school, when my former masonry instructor suggested I join his class, I’ve enjoyed every bit of it!
Auto Body/Collision RepairKoby Garvin CarrascoStudentRathdrum, IdahoI chose to pursue automotive refinishing because of my draw to art and the chase of perfection. Nothing catches a persons eye more than a beautiful car with sleek body lines that just encapsulates and envelopes someone’s cur... read more HVACRyan IversenInstructorHanceville, AlabamaA career in tech education has been an opportunity that I have been very happy with. I’ve always thought I wanted to be a history teacher, but HVAC is a tool that everybody can use!
Auto Body/Collision RepairJoshua ThompsonStudentStar, IdahoMy high school collision repair teacher taught me how to fix wrecked cars and make money doing it. He’s been a great inspiration to me because of his joyful attitude toward life and always treating others the way he would wa... read more Auto Body/Collision RepairAleah SauderStudentMarengo, IllinoisLast year I placed 2nd at Nationals with two other girls on the podium and that made me decide that automotive refinishing is what I was born to do.
Auto Body/Collision RepairLuis TiradoStudentBellevue, NebraskaMy father was a painter before me, he inspired me to follow in his footsteps and be passionate about the Auto-Body industry.
WeldingBrylie BallStudentButte, MontanaI’ve always been creative and interested in working with my hands. As a female welder, I can work as hard as the other boys. I am just as talented in the industry!
Automotive - General RepairJonathan GarrisonInstructorNew Albany, MississippiI loved my career as a technician working on cars and when the opportunity came to teach students I wanted to embrace that opportunity because of the lack of basic skills I was seeing in the industry.
Architecture & ConstructionJohn DavisStudentLeakesville, MississippiI got to SkillsUSA from lots of practice, hard work, and determination. Also, a great instructor with the right attitude and mindset.
WeldingNicole EhresmanStudentDuluth, Minnesota
WeldingTyler WinsorStudentBellevue, NebraskaMy dad was my biggest inspiration in helping me decide to become a welder and be the best I can be.
ManufacturingLily HallStudentMadison, WisconsinI took a class for $20 in high school and ended up loving welding. I went back to school for metal fabrication a couple of years after graduating.
Transportation, Distribution & LogisticsJames ElseaStudentInwood, West VirginiaI chose this industry because I like working with my hands and making money.
Heavy Duty Truck RepairWyatt FrederickStudentWestminster, MarylandMy father worked on trucks, he has since passed away, but he inspired me to get into the heavy-duty field.
HVACDaniel HostetlerStudentJoppa, AlabamaI chose this industry because I love HVAC with the flexibility and never being in the same place.
WeldingEmily RobinsonStudentShoreline, WashingtonWelding is an amazing hands-on career that will help you make a wonderful future for you and your family!
WeldingClayton FegleyStudentMcClure, PennsylvaniaI chose this industry because my grandfather was a welder. I’ve been doing it for four years and I plan on becoming a CWI (Certified Welding Inspector).
Automotive - General RepairEduardo AdamesInstructorPonceI love working on cars because I can understand how each component works together. Teaching is my passion and I love to see future automotive technicians in my community.
Transportation, Distribution & LogisticsAbraham GarciaStudentBeach Park, Illinois
Automotive - General RepairJovan luceroInstructorOmaha, NebraskaI love being able to teach our next generation of automotive technicians. Being able to give students a different path to success. Teaching them everything I have learned in the industry
Automotive - General RepairTrinity DupreStudentMontegut, LouisianaMy best friend got me into it the automotive industry! We were just working on cars in general. My other best friend is in it too and I just never left the industry. I thought it would be lame, turns out I really enjoy it.
Aviation/AerospaceZachary ThornhillAviation Student/MRO Team CaptainWichita, KansasI have a passion for this industry. I always want to excel, I want to learn, I want to know how this industry evolves. The reason I came to AMC is because I wanted to hone my skills in as a future A&P mechanic. Currently, I ... read more Automotive - General RepairAJ PetersStudentBradenton, FloridaI got into Automotive industry because taking my car to the shop was too expensive. After being in a dual enrollment at my local tech school, I learned how to do basic service on my family’s cars and saved a lot of money in ... read more Auto Body/Collision RepairAnnie DovaliSkillsUSA ParticipantOmaha, Nebraska
Automotive - General RepairWillie DeBruceSkillsUSA ParticipantTifton, Georgia
ManufacturingAustin McClainSkillsUSA ParticipantLake Lillian, Minnesota
Auto Body/Collision RepairAustin LambertSkillsUSA ParticipantHomer, Nebraska
ManufacturingJessilynn LinkSkillsUSA ParticipantOttumwa, Iowa
RacingDidier FrancesiaCrew Chief at AJ Foyt RacingHouston, TexasI was born and raised in France. Since I was a kid, I always loved stuff that goes fast. So I started to race motorcycles and dirt bikes. I bought my first motorcycle when I was 13. My parents didn’t know. I was playing with... read more Aviation/AerospaceAlex FigueroaAOG Lead Technician at BombardierNewington, ConnecticutMy wife and I wanted to be bush pilots. Fly in the jungle, and do missionary work. And I thought “Well if I get flight training, I should probably understand what noise the plane is making, good or bad.” I figured I might b... read more Aviation/AerospaceMaddie GlassettAMP Student at Tarrant County CollegeFt. Worth, TexasThere were so many things pointing me toward going to A&P school and becoming a mechanic, it just took me 24 years to act on them!
I graduated high school in 2017 and started my degree in aerospace engineering at the Univers... read more Auto Body/Collision RepairRobby LaytonShop Owner/Collision Repair Technician at Layton AutobodyEphraim, UtahMy name is Robby Layton, and I'm a 20-year first-generation automotive technician. I mainly focus on the collision industry. From a young age, I knew I would never be able to work for somebody, so being my own boss was the o... read more Automotive - General RepairPhilip KellermanSkillsUSA ParticipantLavonia, Georgia
Automotive - General RepairKason ParsonsAutomotive TechnicianCrossville, TennesseeI’ve been working in the automotive space for about 2 years. I've always had a love for cars since I was a kid, and I always had a technician for a brother who was always helping out the family. I thank him for inspiring me,... read more HealthcareKevin WattsCertified Pedorthist/Orthotic and Prosthetic Technician III at Shriners Hospitals for ChildrenEasley, South CarolinaI have 12 years of experience working in pediatric orthopedics. Orthotics are any type of bracing that supports a limb/prosthetics and are used as replacements. Do something each day to help someone. It is very rewarding hel... read more Aviation/AerospaceTyler TranAviation Student/AMC Competitor at WSUTechWichita, KansasThis is my very first time at an event like AMC and it's very exciting. An event like this is really important to me to be able to branch out and explore what else the industry has to offer. So it is really cool to see other... read more Automotive - DealershipDominic HamiltonMechanic at JDB NowAkron, OhioI've got 6 years as a professional fixer and I've been fixing things around the house since I was a little kid. Don't be afraid to tackle a big job. Practice is what makes you better and shying away from a big job will never... read more Architecture and ConstructionJess BowlinSkillsUSA ParticipantAuburn, Alabama
Automotive - General RepairKarina RiceSkillsUSA ParticipantWillmar, Minnesota
Automotive - General RepairCaree HendrixMechanic at Harley DavidsonTuscumbia, AlabamaI’ve been a student in automotive classes for 1 year but I’ve been working on little projects for several years. I’ve always been interested in knowing how things work on a deeper level. I enjoy taking things apart and putti... read more Aviation/AerospaceMilagros RoblesAviation Student/AMC Competitor at Tulsa Technology CenterTulsa, OklahomaI attend Tulsa Technology Center in the AMT program. My journey started when I was a little confused. Since it was my junior year, I decided to to Generals 1, trying to learn a little bit more about the aircraft I intended t... read more ManufacturingIan VandreStudentMarshfield, Wisconsin
ManufacturingJak StarkelSkillsUSA ParticipantSt. Ignatius, Montana
Transportation, Distribution & LogisticsJared RentmeesterInstructorEldridge, Iowa
MarineScott JenneWave Energy Engineer at National Renewable Energy LaboratoryArvada, ColoradoI've always been a tinkerer, driven by an insatiable curiosity about how things work. As a kid, I started by taking apart old radios and playing with broken dishwashers—anything with moving parts was fair game. By my teenage... read more Technical Education - students and instructorsAshton HicksStudent at Aims Community CollegeGreeley, ColoradoMy love of racing and motorsports is what got me into this field, but now I just really enjoy the work and the satisfaction of a job well done.
WeldingRachel LeeInstructorAtlanta, Georgia
Transportation, Distribution & LogisticsAllison AgundizStudentDonna, Texas
Transportation, Distribution & LogisticsLogan SiegelStudentByron, Michigan
Auto Body/Collision RepairAlyssa LittleAuto Body Technician at Poplar Auto RefinishingPoplar, WisconsinMy name is Alyssa, and I am a 22-year-old autobody tech going on my 3rd year in the industry. When I was 17, my maternal grandparents' health started declining - while I would love to also share about my grandma, I will be f... read more Aviation/AerospaceTrevor GrossLead Turbine Mechanic at University Air CenterGainesville, FloridaI fell in love with airplanes in middle school when my Dad gave me an RC airplane for Christmas one year. I’ve always loved building things, and decided to apply to ERAU for college. I got in and I was involved in the AMC Co... read more Transportation, Distribution & LogisticsMike BellInstructorNampa, IdahoI chose my career cluster because dirty hands make clean money!
Aviation/AerospaceHunter WeldonAviation MachinistHernando, MississippiI grew up in a family of union electricians and I always knew I wanted to work with my hands. Right out of high school, my cousin introduced me to the world of machining, and after a little bit of schooling and a lot of hard... read more Agriculture Equipment RepairBrittanee WeaverFarmer at Yoder Family FarmsSturgis, MichiganI started working part-time on the farm when I was 14, sorting potatoes. I quickly fell in love with everything I did here and wanted to work full-time after graduating high school. I finally got the position a few years ago... read more Automotive - DealershipMarvin ColburnService Technician at Scenic ChevroletEasley, South CarolinaI got bit by the mechanic bug in high school, where I would flip cars with my buddies. I took auto tech classes in high school but couldn’t pay to further my education. I joined active duty U.S. Air Force and worked on eject... read more Automotive - Specialty ShopChrisShop Foreman/Lead Technician at Hill Countey Yota WorksNew Braunfels, TexasI started as a lube tech at my local Toyota dealership in 2015. College wasn’t for me and I decided to not go back after 2 years and pursue a career in automotive. I had a Jeep Wrangler that I modified and took a Rock Crawle... read more Aviation/AerospaceAubrey ClutterAviation Student at WSU TechWichita, KansasI can remember being a Sophomore in high school and thinking about what career I was to pursue. I thought about it for a while. So, I decided that being an aircraft mechanic would be something I would do in the future. My gr... read more Automotive - Specialty ShopJohn WestMachinist/Fabricator at Wesco FabricationQueen Creek, ArizonaI started in the drag racing industry in the late 1970s. This developed into Wesco Fabrication, I began by building small race car parts to now fabricating complete race cars. I've owned, driven, and worked on mainly funny c... read more Construction Equipment RepairJames HargisService manager at Job-Site EquipmentCoventry, Rhode IslandI started out working on farm equipment and small engines. After I turned 18, I worked for a fleet company as a lube tech, then field service, then transmission specialists. Joined the Army and became a heavy equipment techn... read more Trash removalChelsea CucciContainer Repair Mechanic at Casella WasteHoosick Falls, New YorkGrowing up, I was not mechanically inclined, and being a welder was something I had never imagined. I grew up attracted to fashion and clothing, which led me to get my bachelor's degree in fine arts. At that point in my life... read more ConstructionTommy HernandezPiledriver at BridgebuildingLodi, CaliforniaI’m a bridgebuilder from Northern California and have been in the industry for almost ten years. I’m OSHA certified, a welder, a Formwork builder, and a setter. My advice is to learn as much as you can.
Automotive - Specialty ShopJustin ThompsonFabricator at Customs & Hotrods of AndiceFlorence, TexasI build hot rods and customs for a living. I’m a father of 3, and when my first son was born about 11 years ago, I saw the biker build off of discovery. At the time, I needed to find a real career to provide and decided to t... read more Aviation/AerospaceBrian BeneditoFloor ManagerNorth Miami, FloridaI have been certified A&P for 17 years and am currently a floor manager at a 145-turbine repair shop in Doral, FL. It took a lot to earn this position, from the humble beginnings of working in a warehouse to becoming a preci... read more Architecture & ConstructionDaniel KernInstructorStar, North Carolina
Aviation/AerospaceDavid ChenAircraft Maintenance Technician at LaGuardia AirportMiddle Village, New YorkI became an Aircraft Technician at 19, right after Aviation High School. I started working at United Airlines in Newark Airport on Aircraft such as Boeing 737, 757, 767, 777, and 787. I performed work that included engine ch... read more Heavy Duty Truck RepairRichard TaylorMaster Diesel Mechanic at Tyson FoodsBloxom, VirginiaA diesel mechanic by trade, I also help countless others in the community with small engine and car repair. I am always ready to help others, I'd offer to assist neighbors and a church family with landscaping chores and law... read more Aviation/AerospaceJessica LundyLead Aircraft Mechanic at Skywest AirlinesLaVernge, TennesseeI’ve been in aviation since I was 17. I started A&P school less than five days after my high school graduation. I’ve fought tooth and nail to make my name in this industry and make room for myself amongst the men. I’ve had t... read more Aviation/AerospaceLawrence TaylorHigh Precision Aerospace MachinistColwich, KansasI first started in the aerospace industry in assembly. I assembled parts for three and a half months but decided to move on to bigger and better things. Machines. I've been machining for almost two years, and I love it. Alth... read more ManufacturingMark PurvianceWelderMansfield, OhioMark grew up in the hollers of Tennessee and had always been tinkering, making, and fixing whatever was around. Growing up, his skills came in handy, fixing up all the used cars we drove. He's worked in factories molding rub... read more ManufacturingChason WarrenStudentNashville, GeorgiaI got into this industry because there’s good money and a lot of opportunities.
Heavy Duty Truck RepairKoby GilmanJohn Deere Service Technician at John DeereMenasha, WisconsinI am a diesel service tech for John Deere; I work on combines, tractors, sprayers, and planters. I love this industry and love Snap-on tools. I just moved to Wisconsin to pursue my dream of working for John Deere. I worked o... read more Heavy Duty Truck RepairJesse SprinkleDiesel Tech at Travel AmericaMinier, IllinoisI’m a 19-year-old learning to work on semi trucks to keep the fleet for companies all over the states to keep them running and delivering loads! I’ve worked on small passenger planes and large semi trucks, and I’m constantly... read more Heavy Duty Truck RepairAmber KierstynDiesel TechnicianAdams, WisconsinSince middle school, I've known I was meant to work on big trucks. My high school did a "life" day where you got to choose a career path and build a budget, and of course, my chosen career was a diesel technician. I graduate... read more ManufacturingJed WillsMachinistSpring Hill, TennesseeI grew up working with my dad in his wood shop and was always interested in how things work. I worked at a lumber yard and several construction jobs in high school and college. While attending college, I was the go-to guy in... read more Aviation/AerospaceBlake BersonTurbine Engine Mechanic at StandardAeroAugusta, GeorgiaI grew up a Boy Scout in Crawfordville, FL, and went to a very trade-focused high school, Wakulla High School, and dual-enrolled my first two years there in the automotive program through Lively Technical College; I decided ... read more Automotive - DealershipIsaac MorenoExpress Tech at Trust Palmdale HondaPalmdale, CaliforniaEver since I was little, I had an interest in fixing things. My dad would let me do oil changes, brakes, and other maintenance. He taught me all the basics. I took auto tech in high school and knew I wanted to work in the au... read more Fleet MaintenanceJonathan SchoenfeldtShop Foreman/Technician at Badger CoachesWaukesha, WisconsinAs much as I've been told, I was born to be a mechanic. My mom says growing up, I used to play with toy cars and read the Sears parts catalogs. Growing up, I was always wrenching and would work on bikes, which led to my firs... read more Plastic ContainersDavid JohnsonMechanic at DartMolena, GeorgiaMy dad is a Maker and a Fixer and loves repairing things. He spent 20 years working for a concrete company repairing their machines and then transferred to the plastic industry to maintain their equipment. He loves fixing th... read more ProductionBeau WestWelder at CyntechConroe, TexasI have been a welder for 25+ years. I work in a production shop and make Tig bracelets, Texas Roses, keychains, Tig Art, and whatever I can make from the house. I've been married for 13 years to the best woman I can imagine,... read more Automotive - Specialty ShopAlex LapaOwner at Honor Street GarageSimi Valley, CaliforniaI started out when I was 17, working at a Jiffy Lube to take care of myself and my younger brother. The mechanic shop next door saw me working hard, and the owner decided to take me under his wing. He taught me everything I ... read more Auto Body/Collision RepairFrank RechlinShop Owner at Ikandy PaintworksPeoria, ArizonaI own Ikandy Paintworks here in Peoria, Arizona. I really got started with my first car, I saved my money and my dad gave me some money. I took my car to have it painted and it came out terrible. I went in there like, ‘What ... read more Automotive - General RepairCameron PfeifferAutomotive TechnicianToledo, OhioI am a first-generation auto technician in my family. I’m 23, halfway to my master certification. Very proud of what I do. Because of my skill set, I can do cool stuff. I’m currently building a sprint car. Don’t be afraid to... read more MarineRyan KassickMarine Technician at Everest MarinaCape Coral, FloridaI am a marine technician. Going on 2 years in the field. I went to New England Institute of Technology for advanced marine technology. I worked in the pool and hot tub field for 9 years prior. It’s an amazing feeling to lear... read more Automotive - DealershipCourtney KoregelosTechnician at Ford SacramentoSacramento, CaliforniaI’m a 23 year old female mechanic. Starting at 16 I grew an interest to cars. At 17 I was homeless and bought my first car, not having enough money to repair it I learned to fix it myself and learned to love being a technici... read more Heavy Duty Truck RepairGavin ThompsonHeavy duty truck technician at Local independent shopBoise, IdahoMy name is Gavin Thompson and I’m a heavy duty diesel technician from Boise, Idaho. I started as a sophomore in high school at a local independent shop with no experience. I quickly learned to fall in love with the industry ... read more Automotive - General RepairMisael RodriguezAuto Technician at Andy Mohr AutoMotive Area 31 Auto ServiceIndianapolis, IndianaI’m a first-generation Mexican American male 17-year-old student learning in the automotive field here at Ben Davis High School and with a big dream to achieve and accomplish through my journey of education. My story is, I w... read more Aviation/AerospaceQwinten VannucciTechnician at EnvoyDenton, TexasI’m a 20 year old man who is almost a year out of school and had been around cars my whole life. Worked and built cars growing up and wanted something just a little cooler and the next step was aviation. I started school the... read more Automotive - Specialty ShopAustin HillWelder at B-RogueWrightwood, IllinoisOriginally, I saw a for-hire ad online and I got ahold of them via Instagram. I then came out for a test and welded some things and they told me they would like to hire me. I fabricate and produce all of the intercoolers and... read more Heavy Duty Truck RepairAdam ThorntonMobile MechanicFort Worth, TexasI served in active duty army for 5 years and then transitioned into the heavy duty truck industry after. I do mobile repair in the Fort Worth area and love serving my clients the best service they could ask for. I love being... read more Automotive - General RepairMohamed LabaniehEstimator/Technician at Speedwagon AutobodyIrvine, CaliforniaI am 22 years old and have been working in the auto industry for about four years. I started out working under my pops for free for two years and became the shop's estimator/parts manager/foreman/secretary/bookkeeper/service... read more Automotive - Specialty ShopCarlos RoblesSenior Technician at JBA SPEED SHOPSan Diego, CaliforniaI started messing with cars at a very young age. I wasn't that good in school, and it was hard for me to pay attention. I didn't have enough credits to graduate in eleventh grade, so I dropped out. I went to work at my dad's... read more Transportation, Distribution & LogisticsIan RowlandStudentIrvine, Kentucky
ManufacturingHunter VolcheckStudentGretna, Nebraska
Transportation, Distribution & LogisticsTommy RaleyStudentShipshewana, Indiana
Aviation/AerospaceShaun LionudakisAircraft Technician at United AirlinesNew Caney, TexasFrom 18-21 years old, I was a semi-truck and diesel tech and have worked as an aircraft technician for United Airlines from 22-40 (currently employed). I also enjoy working on one of my many vehicles; almost all of my tools ... read more Automotive - DealershipLou Romano JrAutomotive TechWest Islip, New YorkGrowing up I spent most of my free time working to restore older cars in the driveway with my dad and uncle. Some of my happiest (and frustrating) memories are when we’d get something running after having to push it into the... read more Tool & DieWoody MasonSupervisor at B&J Specialty IncRome City, IndianaI'm a working Supervisor who repairs plastic injection molds, guiding the younger generation on why and what to fix! I do micro-tig welding through a microscope and laser welding! I've been working in this trade for 45 years... read more Automotive - DealershipWayne BelsheElectrical TechnicianWeslaco, Texas
Ever since I was a kid I’ve always liked to build things and the earliest I remember was with Legos. Once I grew out of that, then came the plastic model cars that takes a lot of time and patience to complete. Some of my fa... read more Aviation/AerospaceJennifer PatxotAircraft Maintenance Technician at LGA/American AirlinesSunnyside, New YorkI am one of several female mechanics for American Airlines at LaGuardia Airport in New York. This industry is mostly male dominated but I do not let it discourage me from performing my duties as an female mechanic. I'm a bad... read more Marine, agricultural, construction, motorcycle, and automotive repairTrebor McFarlandProprietor/Technician at McFarland MotorsTahlequah, OklahomaI'm a third-generation repair technician from a rural area. Growing up, I watched my father fix anything and everything and help as many people as he could. Tahlequah is a small community, but it's tight-knit; we take care o... read more Automotive - DealershipJonathan LytleTechnician at Ferrari PhiladelphiaAston, PennsylvaniaI started working on cars as a kid, tinkering on them with my dad. I had always loved taking things apart and figuring out how they worked. My mom recalls many toasters, coffee pots, and other household things that I took ap... read more Automotive - DealershipClay PetittLube Tech at Ver Hoef AutomotiveSheldon, IowaI work as a lube tech during the day and enjoy building hot rods and race cars during the nights and weekends. I have been working on cars, trucks, motorcycles, and farm equipment since I was old enough to be in the garage. ... read more Automotive - General RepairHannah MartinezAutomotive marketingShasta Lake, CaliforniaMy name is Hannah Martinez, I am a 28-year-old wife and mom with a passion for the automotive industry. What started out as me sharing my love for cars turned into a job for me and I'm working with brands I remember seeing i... read more Automotive - DealershipElex WagnerTechnician at Chipola FordMarianna, FloridaI grew up watching my grandad and uncles work anything with an engine, and I was always interested and trying to learn something. I went to work with a dealership after a family friend who owns a dealer offered me a job 6 ye... read more Construction Equipment RepairRaymond RothrockTechnician at Martin PavingLake Hamilton, FloridaI work for my wife's family. I am the only technician at the shop. It is a busy job, and I love it, ranging from small engine work to big excavators and everything in between. I have been a wrencher since I fell in love wit... read more Automotive - DealershipAdam GilhamTechnician at Ed Voyles HondaCartersville, GeorgiaI grew up working and taking everything I could apart. I always wanted to know how things worked and functioned. After high school I got into a nasty motorcycle accident. And bought my first Honda to force myself to walk aga... read more ManufacturingAdam Horton2024 SkillsUSA ParticipantKittrell, North Carolina
Automotive - Specialty ShopLuis RosalesTechnician at B-RogueHanover Park, IllinoisI first started working here about nine months ago. I saw their ad on Instagram that they were looking for technicians and I was just a general technician, but I was looking to get into the aftermarket. I applied and got the... read more ManufacturingScottie BlankenshipMachine Operator at TN LLCErwin, TennesseeMy name is Scott Blankenship; everyone calls me Scotti. I have a wife, Heather, and two amazingly beautiful little girls, Kimery and Kassie. As a kid, my father would bring old CB radios, car stereos, and speakers home for m... read more Power GenerationBenjamin FranksE&I technician at Dominion EnergySt George, South CarolinaI’m an E&I tech. I perform daily PMs on our machinery and reactive maintenance when something breaks down, including replacing big 1000-hp electric motors. And I use all my Snap-on tools to do it as well. Follow your gut ins... read more Construction Equipment RepairGersom RomeroEngineer at EmpireRockville, MarylandI started fresh out of high school working on cars; I went to the Community College that has a great program and has almost every Snap-on tool! I went to work for Sears Auto Center. I moved to retail in advance, and I ended ... read more ManufacturingAnthony WilliamsonOwner/operator at Regenaqua, LLCMesa, ArizonaI own a pool water recycling company in Arizona. Everything we use we make ourselves—from welding I-beams to maintaining our 7.3 turbo diesel, we work on everything. We struggle to survive in a new industry, but damn it, we ... read more Aviation/AerospaceEric BurkeAviation Maintenance Technician at United Parcel ServiceSalem, IndianaI work in the sheet metal shop at UPS in Louisville, Kentucky. I graduated from A&P school in 1997 and got on at UPS in 2001. I work on Boeing 747s, 757s, 767s, Airbus A300s, and MD-11s. We do sheet metal and composite repai... read more Performance MotorcyclesJared NgMechanic/WelderPembroke, MassachusettsI build performance Harley Davidson motorcycles. I do everything from tires and oil to build full blown stunt bikes. I came up in the automotive world and got into Harley’s and went that direction completely. Take everything... read more Heavy Duty Truck RepairDavid HuffmanTech 3 at FleetPrideDerby, KansasI have been a tech for 20+ yrs, and also a single, fulltime Dad. I enjoy working on my hot rod and vintage motorcycle. My advice to others is to get as much school and training as possible and all the certifications you can.
Automotive - DealershipDaniel SchrockMaster Technician at Bob Howard ChevyBethany, OklahomaI’ve been a master technician since 1992, working for a GM dealership and independent garages building transmissions and doing driveability for almost 35 years. One of the coolest project I worked on was helping single mothe... read more Construction Equipment RepairTravis MongeauHeavy Equipment Field Technician at Jmac Resources IncWilliston, North DakotaI am a Heavy Equipment Field Technician here in the oil fields of North Dakota, I service a variety of machines from skid steers to twin engine scrapers and everything in-between. I enjoy my career, it's something new every ... read more Heavy Duty Truck RepairSarah McCullarDiesel mechanic at LovesHuntsville, AlabamaMy name is Sarah, people at my shop call me PeeWee. I’ve been a mechanic for about a year now and if you would have asked me a year ago if I would be I would have said no. Growing up I always had an interest but I was always... read more Fleet MaintenanceTimothy KalvinFormer Fleet Manager at Pride Care AmbulanceBellevue, MichiganI left the business of being a mechanic in the late 80's to pursue other endeavors. I was offered the position of Fleet Manager for Pride Care Ambulance because of my life's experiences and automotive knowledge. I saw it as ... read more Technical Education - students and instructorsSam TraceyAutomotive SkillsUSA CA Chair PersonRiverside, CaliforniaMy mom and dad are my inspiration. They started their own auto repair shop in Riverside , California. I am now the second generation of the auto repair shop. I hold my smog inspector license in California, and I am now the A... read more MiningZachary CandyDiesel Mechanic at Falkirk MineWashburn, North DakotaI graduated with my diesel tech degree in 2020 and started work at a construction equipment dealer. After two years and a large variety of experience I got a job as a fleet mechanic at a surface coal mine. I work hard to sup... read more Automotive - General RepairHailey McGuireFabricatorIndianapolis, IndianaI’m Hailey & I am a stay at home mom and Fabricator! My love for cars and fabrication came to light when I got into a relationship with my boyfriend, Cory. In the last 9 years I have helped him build engines, tune cars & gen... read more Construction Equipment RepairDan KalalRetired at Kalal ConstructionHermiston, OregonStarted working for my Dad's earth moving company at age 14 loading trucks with a Cat 966 loader. After high school, I started buying Snap-on tools and became a full-time heavy equipment and truck mechanic. After 40 years of... read more Aviation/AerospaceEmily KennedyAircraft Maintenance Technician at Medway Air AmbulanceLawrenceville, GeorgiaWhen I was younger, I never knew I was going to be (or wanted to be!) a mechanic when I ‘grew up’. As a kid, I spent a lot of time in my mom’s Hair Salon - vastly different from being a technician! There were no mechanics in... read more RacingDerrick MorrisCrew ChiefIndianapolis, IndianaI always knew I would be in motorsports, I just didn’t know how I would get there. As I progressed, I got into racing go-karts, and stock cars, I even got into racing myself. I ran out of funding and went to college to UN OH... read more Automotive - Specialty ShopBrooke WhiteInstallation Technician at Adrenaline VansMontrose, ColoradoIt all started when I bought my first vehicle, a 2001 Jeep Wrangler. I had always hung around my dad as he tinkered with vehicles and did routine maintenance on everything, but didn’t develop a passion till I bought my Jeep.... read more Automotive - DealershipNicholas McKayAutomotive TechnicianBattle Creek, MichiganI grew up loving cars. It has always been my hobby and my identity. When I finally hit high school, I was working on a farm in the summer and then coming home to work on my Jeep. My graduation year of 2020 meant some crazy l... read more RacingTyler ReesIndyCar Crew Chief at Chip Ganassi RacingIndianapolis, IndianaI got a half-day internship at Target Chip Ganassi Racing while I was in high school. I started out cleaning parts and doing the dirty work in the sub-assembly department. As soon as I graduated, they offered me a full-time ... read more RacingTony GrauSystems Engineer at HMD MotorsportsDes Moines, IowaWhen I went to college for Mechanical Engineering, all I wanted to do was work at General Motors and design cars. However, once I got there, I realized I didn’t like being behind a desk in a huge company, so I moved back hom... read more Automotive Technology & Alternative Fuel Maintenance and Advanced ElectronicsSamantha DykesFull Time Student/ Full Time Mom at WSU TechWichita, KansasMy name is Samantha, I go by Sam. I am a 36 year old single mother and a college student. I don't have family in the automotive industry, I just became interested and wanted to know how to work on and fix cars. When I got in... read more Technical Education - students and instructorsIsrael CervantesSite supervisor at YMCAWichita, KansasI am a student at WSU Tech currently enrolled in AMT (aviation maintenance technician) I also was still taking high school classes while taking my tech classes. I started my tech classes my junior year.
What got me into wit... read more Aviation/AerospaceKevin Fuentes-MaciasA&P technicianWichita, KansasI am a first-generation graduate from my family. I graduated from Bishop Carroll. I come from a family who does not have much but gives it our all. I have worked since I was just a little kid. Now that I have the opportunity... read more Aviation/AerospaceBen MartinAircraft MechanicVancouver, WashingtonI grew up around airplanes playing with my dad’s Snap-on tools while he worked on planes and showed me how tools worked. From then on I’ve loved fixing cars, motorcycles, and airplanes. My experience growing up around aircra... read more Automotive - General RepairMatthew BradshawMechanic/student at City of Wichita/WSU TechMaize, KansasI’m 39 going on 25. I have been a debt collector for most my adult life. Sitting behind a desk. Taking and receiving calls from upset folks. I had been wanting to become an automotive mechanic/tech for 20 years but didn’t fe... read more Aviation/AerospaceMegan LaubhanFlight Dispatcher/Inventory Control Specialist at WSU TechWichita, KansasI grew up having never turned a wrench in my life. My goal career track was always to be a pilot as I've always been heavily enamored with aviation, and I hadn't considered anything else. I first started wrenching through th... read more Automotive - Specialty ShopBrandan DumelleShop Owner at B-RogueGlendale Heights, IllinoisI’ve been passionate about building cars my whole life and I wanted to do something different and build higher-tier cars, something I can get a little more reward from building them. I really like what these cars allow me to... read more Automotive - DealershipDave KellyTechnician at Auto Nation Chevrolet TimoniumSTREET, MarylandI've been in this business for quite a while. Like a lot of folks I started with repairing my own vehicles when I was a teenager. I was rebuilding engines and performing valve jobs and rebuilding carburetors and working on o... read more ManufacturingDon DaviesTool and Die Maker at Snap-onMilwaukee, WisconsinI have been at Snap-on for 41 years. I have had a few positions in the last 41 years. I started as a second auto position operator. I was a cutter/grinder, from there I moved to be a C machinist, then a B machinist, A machin... read more Heavy Duty Truck RepairMcKinley (Mac) ArmijoHeavy Duty TechnicianDenver, ColoradoI am a 3rd generation mechanic. Growing up I worked Saturdays with my Dad. As a young adult I worked on mutual funds at Janus, but I wanted to do something with my hands so I left and attended Denver Auto & Diesel College.
MarineCaleb GalekField Service Mechanic at Marine Systems IncSt. Petersburg, FloridaHey all, I’m Caleb and I always loved turning wrenches from a young age, helping dad fix his cars and tinkering on my own car when I got my first. My first mechanic job was working at a shipyard fixing a multitude of things ... read more ManufacturingFredia WarriorCNC Machine Operator at Snap-onMilwaukee, WisconsinI have been at Snap-on for 7.5 years. I started at Snap-on through a temp service. My first assignment was Quality Inspector, checking parts. I knew I liked the company and the people pretty quick. I enjoyed the work I was d... read more Heavy Duty Truck RepairNate LatterHeavy Duty Drivetrain TechnicianPalmer, MassachusettsI started out as a truck driver delivering fuels at age 20. I have been tinkering with cars and bikes since I was 5. My dad taught me almost everything I know. At 23 I got tired of life in the truck and decided to turn my ho... read more Automotive - Specialty ShopMeg KillianMechanic at NV Expert European auto repairBradenton, FloridaI was a jack of all trades, from restaurants to retail, being an accountant and even a CNA. One day I was driving and saw a Miata, and it was game over. I bought the Miata and learned everything I didn’t already know how to ... read more Automotive - DealershipGrace ClaudioAutomotive Technician at BMW of ManhattanBronx, New YorkWhen I was 15-20 years old, I was an amateur boxer. The sport was and still is a male dominated sport. I was the only female at the first boxing gym I started training in. I was in love. Boxing was absolutely my love. I was... read more Auto Body/Collision RepairKeaton LeeCustom painter at Crazy K KustomzPost Falls, IdahoMy name is Keaton I’m an 18-year-old custom painter and I just started my own business (Crazy K Kustomz) . When I first started painting I had no idea about the custom side of it until my instructor Andy Rogge introduced me ... read more Oil & GasAlex TheoOil Mine Operator at SSAB oil minesWellington, FloridaI sat on the cold pavement, my weary eyes gazing at the bustling city around me. Homelessness had stripped me of everything, my dignity, my dreams, and even my sense of belonging. But deep within my soul, a flicker of determ... read more ManufacturingCorean PerkinsAssembler, Lead Person at Snap-onMilwaukee, WisconsinI’ve been at Snap-on since 2013. I started as a temp and moved quickly into full-time. I am the lead person, so I help setup and break down the machines, get employees their work, assist with parts, make sure things are not ... read more BlacksmithingSteve KalbBlacksmithing instructor at KalbironworksFort Myers, FloridaI’ve been Blacksmithing for 25 years. I take pride in teaching new students how to forge and work coal fired forges. Working with old tools and equipment is part of my passion. I need quality tools to repair and upkeep t... read more RacingIsaac TownsendIndyCar MechanicBrownsburg, IndianaGraduated from UNOH in 2012. Started professional racing in 2011 while in school for a grand am Grand Touring team. In 2013 did a season of Daytona Prototype and was my first season of over-the-wall pitstops. 2014 and 2015 I... read more Automotive - Specialty ShopMatt ZhorakTechnician at B-RogueAddison, IllinoisI started at B-Rogue about two months ago. I came in with one of the cars I built and they liked my work so I’m here. I’ve been doing it basically my whole life, I mean since I was like five or six we’ve been playing around ... read more ManufacturingNate TurnbullExtensions Welder at Snap-onMilwaukee, Wisconsin I have been with Snap-on almost 16 years. I started off in sockets and then moved over to welding. My job is to take two components and weld them together. I do anything from a ¼” to 1” size and 12” to 36” in length all on ... read more ManufacturingBryn OttoWelder at BrynWeldsGrand Island, NebraskaI had nothing going for myself and I was a freshman in high school, my high school was essentially a trade school and I wanted to get into the construction pathway but they threw me in welding… thank god they did because I f... read more Automotive - Specialty ShopSam StufftShop Foreman at Red Rusty GarageBrookeville, MarylandI started working on cars at a very young age. Helping my dad with our family cars and helping him build his race car. I was an intern apprentice tech working at Neubauers Auto Repair in Ellicott City, MD. I was working at t... read more Fleet MaintenanceDiego CastilloEquipment mechanic assistant II at City of San JoseSanta Cruz, CaliforniaI began automotive classes in high school. Throughout high school I attended college automotive classes. During that time, I also was working 32 hours a week wrenching at a shop after work that was a Porsche specific shop wo... read more ManufacturingJorge Montiel AguilarHeat Treat Machine Operator at Snap-onMilwaukee, WisconsinI used to work for a company that did work for Snap-on. Their facility burned down. They rebuilt and expanded and during that change, I was laid off. After speaking to a truck driver from that company, he told me that Snap-o... read more Military & DefenseJessica ConsidineLead Welder/Fabricator at Navistar Defenselivonia, MichiganMy story with metal starts with jewelry-making courses in high school. I thrived in this atmosphere of creating jewelry with non-precious metals. After high school, I pursued bench jeweler jobs but found they required a degr... read more ManufacturingJun Chul ChungBits Machinist Lead Person at Snap-onMilwaukee, WisconsinI have been at Snap-on almost 4 years. I am the bits and screwdriver lead man. We make all different size bits. I started as a machine operator. I am from Korea and I came here when I was 20. My background is in electronic e... read more Architectural fabrication & Project Management, Automotive Custom Fabrication Car BuilderNikita AdickesPrimary custom Fabricator, welder, composite tech, car builder, cad restorer, and project manager in automotive and architectural industry at CTEKAliso viejo, CaliforniaHello, my name is Nikita Adickes and I am pioneering my way through the automotive and architectural industry! With over 6 years under my belt, I’ve been performing advanced custom fabrication, welding, composite technician,... read more Auto Body/Collision RepairMike WilkinsAuto Body Tech at Ikandy PaintworksMaricopa, ArizonaI’ve grown up around cars. Both my Grandfather and Uncle worked on cars when I was younger. Because I was around it for so long and still enjoyed it, I wanted to continue in this field. Besides working on cars with my family... read more RacingRyan MarzecMotorsport mechanic/ @home dadPleasant Prairie, WisconsinMy “maker and fixer” story begins like I’m sure many others; with a “maker and fixer” father. I grew up seeing and doing all things construction, all things mechanical. Electrician was my father’s career trade of choice; ret... read more WeldingJoshua HenryStudentAtlanta, Georgia
ManufacturingMarcel RiveraShipping and Receiving at Snap-onMilwaukee, Wisconsin
Auto Body/Collision RepairShane TheriaultMechanic at Baxter AutoRed bank, TennesseeBorn & raised in FL, moved out to TN about a year & a half ago with my girlfriend to continue working with my boss who moved out here as well. Rebuilding the shop & clientele isn’t easy but we are making it happen! We rebuil... read more Construction Equipment RepairErika HoukMechanic/Operator at Bigge Crane and RiggingFairfield, CaliforniaI have always like building stuff. I axle swapped my first truck at 18. I was lucky enough to get into the union as an apprentice crane operator at 19. I always enjoyed wrenching, and the mechanics always amazed me with thei... read more Aviation/AerospaceJared ThomesStudent at Mohawk Valley Community CollegeMohawk, New YorkIn 2022 I decided to make the biggest decision of my life and enter the aviation maintenance world. The past year I've learned about how important maintainers are in the aviation world and I've grown very close with my clas... read more Aviation/AerospaceDaniel Barrios RomeroAircraft Maintenance Technician at AAR Aircraft Services MiamiMiami, FloridaI am a 23 year old Colombian/American who moved to the country in 2014 and after graduating high school and spending some time looking for my passion I ended up finding a love for aviation. I decided to pursue a career as an... read more Aviation/AerospaceMatt CowardA&P MechanicAiken, South CarolinaI’ve been working in the business aviation sector for the last 4 years. I work for a MRO (Major Repair & Overhaul) repair station. I specialize in engine changes and on-wing engine repair for three Honeywell Turbofan Engine ... read more Aviation/AerospaceAnthony QuinonesTech Ops Instructor at JetblueOrlando, FloridaAfter 10 years of service in the US Marine Corps as an aircraft technician, I crossed over to the civilian sector working for JetBlue. I am currently a Maintenance Instructor. I get to teach the new guys the best trade in th... read more Aviation/AerospaceBrendan BallMechanics helper at Alpine airFarmington, UtahI have been working in automotive for a few years and one year when my tax refund came in, I decided I should go to school to become an aviation maintenance technician. I am just about done and ready to go work on some big p... read more ManufacturingPayton BrownTeam Lead (Automotive assembly line)/ Content CreatorSummerville, South CarolinaHi! I'm Payton, I am currently a team lead in an automotive manufacturing facility. You might be wondering what drove me to get involved in this industry, so let's take it back 10 years! I got the bug for cars (specifically ... read more Automotive - General RepairNina FinneyAutomotive TechnicianSan diego, CaliforniaMy name is Nina & I’m an automotive technician in San Diego California. My dad was a GM World Class Technician and was always either working on his vehicles, model kits or his RC airplanes. As a kid, I loved watching and hel... read more Aviation/AerospaceMike BasaraCampus Director at Pittsburgh Institute Of AeronauticsConway, South CarolinaAfter 30 years as an aircraft mechanic, I transitioned into teaching upcoming mechanics at an aircraft maintenance school. Now, I will be continuing my career as Campus Director of my school. I was able to assist with mainte... read more EducationKaden PetersonTeacherFort Dodge, IowaI’m a maker and fixer from a long line of makers and fixers. Recently, I’ve become a teacher of the next generation of makers and fixers as an industrial technology teacher. I get to watch the youth learn to make and fix eve... read more Automotive - DealershipGabriel MillerAutomotive technicians at Sam Boswell Buick gmcLeesburg, FloridaI started in an independent shop at 14 sweeping the floors. I had no idea what I was doing. After enough of those “hey kid give me a hand real quick” I moved on to working on cars. After more experience, I made it to the dea... read more Automotive - DealershipLiz VelascoLube TechPalatine, IllinoisI’ve always liked doing male dominated things. Such as wood working, wrestling and of course, automotive. My passion for cars started in high school when I decided to take an automotive class. That year I decided I wanted to... read more Automotive - DealershipDonjuan ReyesBMW Master Technician at Hendrick BMWFort Mill, South CarolinaI grew up loving taking things apart, learning how they work, and putting them back together, but I didn’t know what I wanted to do with my life. I learned how to work on cars out of necessity in my late teenage years due to... read more Automotive - General RepairOscar PiedraAutomotive technician at Ward serviceWest covina, CaliforniaRight after high school I had no clue which path to take and was clueless of what my passion was, that is until my father, a shop owner, invited me to work at his shop and found an interesting urge to learn more about automo... read more MarineMark GipsonRigging manager at Gause built marinePORT RICHEY, FloridaI'm 37 and married. Served 4yrs in USAF. I've worked corrections, signs, rv service, detailer and now boat builder. I've always been one to fix and build things. I've been building boats for 3 years now. I initially started ... read more Automotive - General RepairChuck LackieRetiredNorth Dartmouth, MassachusettsI’m 54 years old, worked as an automotive technician after obtaining an associate degree in automotive technology. Took a civil service job and worked 27 years as a police officer until having to retire from a number of card... read more Automotive - Specialty ShopPaul LangbeinTechnician at D Langbein Corvette CenterCarnegie, PennsylvaniaI was first introduced to this field by my grandfather who owned his own business. I was only 8 when I discovered the passion I had for it. We worked on all kinds of cars but more specifically Corvettes. I wanted to further ... read more Automotive - DealershipDavid AndersonTechnician at Roswell FordRoswell, New MexicoI started off a lube tech. I went from retail and got into the automotive business not knowing a single thing about cars besides where to read the tire size and how to change oil. After a 45 minute phone interview with the b... read more Aviation/AerospaceEric ZamoraAircraft maintenance technician at Delta AirlinesNewnan, Georgia“Curiosity can take you anywhere”. My name is Eric Zamora, I’m 21 years old and I came to the United States in 2017 from Colombia as a high school student. My passion for aviation began in my home country alongside my stepd... read more Automotive - DealershipJoseph AdameTechnicianRosemead, CaliforniaI have been an automotive tech for 8 years now. Growing up I would help wrench with my father and grandfather on their cars. My passion came from having a rewarding job to helping others get their vehicle fixed right the fir... read more Outdoor power equipmentJohnathon WalkerTechnician at The Hardware StoreLincoln, ArkansasI started repairing outdoor power equipment (lawn mowers, string trimmers, chainsaws, generators, etc.) in high school after taking a small engine class and being offered a job after school. After touring in a band for a yea... read more ManufacturingJorge PerezFabricator at JK Gates & RepairPalm Desert, CaliforniaI am the son of Mexican immigrants. My parents brought us to this country for the American Dream. Where we could be free, work, or embrace America and be good neighbors. With the lessons learned from my family and upbringing... read more Automotive - DealershipMike LaneveTechnician at Precision ChryslerPequannock, New JerseyMy father owns a shop and I’ve been working on cars most of my life and it’s in my blood and there’s no other job I could see my self doing. I’m 18 and two years ago I decided not to work with my father any longer and try my... read more RacingCarine BakerProfessional Drag RacingClaridge, PennsylvaniaEver since I can remember, I have always had a steering wheel and wrench in my hand. I grew up helping my dad in the shop and on occasion he would take me to the races. I remember when I was three years old, I told him I wan... read more Automotive - General RepairMatthew ShacklefordLead mechanic at Jhon's tire discountWallins creek, KentuckyI am 33, and as a child, I always wanted to be a mechanic and have Snap-on tools. As I grew older I fell into a world of drugs which landed me in prison for 3 years. After that I dedicated my life to my passion, being a mech... read more Automotive - DealershipSpencer WebbApprentice at Mountain Home Auto RanchMountain Home, IdahoI am a 21 year old technician in training. I started off my career as a porter or (clean up kid) then I moved up the line to a lube tech, Bedliner tech, used cars then over to my apprenticeship. After some time I became frus... read more Automotive - General RepairAntonio RamirezSelf Mechanic, Part sales at AutozoneAustin, TexasSo back when I had just bought my Suburban I was needing to do a lot of basic repairs but the most important was at least a brake job at the time. Prior to replacing the rotor I had injured my fingers on a door the day befor... read more Aviation/AerospaceAjay DookieInstructorNyc, New York
Technical Education - students and instructorsGino RaymundoStudent/Part-time Stay at Home Dad at Tidewater Tech TradesSuffolk, VirginiaI am currently a Student Technician studying at Tidewater Tech Trades in Norfolk, VA. Prior to pursuing my passion in the automotive trades industry, I served in the United States Marine Corps as a Culinary Assassin (Cook/Ch... read more Aviation/AerospaceBlake KennettAviation Maintenance Technician at Wheels UpFlorence, KentuckyEver since I was a kid I always enjoyed working on stuff and taking things apart seeing how they work. Originally, I went to college for construction management and did not enjoy my first year there and left. Over the summer... read more MarketingChristie SmithSenior Support Agent & RCI Lead at Mitchell1San Diego, CaliforniaI came from automotive dealership industry where I was the Business Development Manager for Drew Ford in La Mesa, CA. My department scheduled sales and service appointments, collected reviews, created marketing campaigns, an... read more Heavy Duty Truck RepairBilly SandellDiesel mechanic at PeterbiltGarden City, KansasI've been turning all kinds of wrenches for as long as I can remember. It's come to the point where now, I take what I have learned and pass it to the next generation so we can keep these machines on the road. I've been a fi... read more Fleet MaintenanceZACKARY DOLSONFleet mechanicNorth Billerica, MassachusettsI started in the field about 12 years ago as a hobby, and now it’s an everyday career. Growing up, nobody was a mechanic in my family. Now, I'm the go-to for everything. A funny thing that happened at one point, my boss had ... read more Fleet MaintenanceJesse BensonLead Tech at Master FleetKimberly, WisconsinWell, after high school I didn’t really know what to do, so I went to college to be a diesel mechanic. I did that for about a year and a half, and I was kind of bored, so I joined the army to be a mechanic. It was skills tha... read more Automotive - Specialty ShopKeith WalkerLead techTheodore, AlabamaHi, my name is Keith. I have been working on cars professionally for 23 years now. I found my passion for cars at 14. I’ve worked on cars in the military and in the civilian world. I worked on the Lamborghini, Maserati, and ... read more Automotive - Specialty ShopOmar DejesusAuto technicianDavis, CaliforniaI grew up without any sort of role models that were blue collar or handy. I never had exposure to automotive work or even understanding basic vehicle functions/concepts! One day in middle school, I had a project to do at a p... read more Aviation/AerospaceMaria ViancoAviation Maintenance Technician at Bode Aviation, INCRio Rancho, New MexicoI have always been one to work with my hands. My mom taught me to crochet at 8 and I have loved it ever since. Airplane models and hot wheels and ballet were the extent of my childhood hobbies. I hit my rebellious stage in h... read more RacingMike Le GallicCrew Chief at INDYCARZionsville, IndianaAs a young child, I knew I wanted to work in racing. This year marks my 25th year in Motorsports. My ascent to racing started in England at 15 as an apprentice mechanic in Formula 1. After several years of traveling the worl... read more Heavy Duty Truck RepairPete CrosbyDiesel mechanic and welder at The 44 companiesNahunta, GeorgiaHi, my name is Pete and growing up around semi-trucks my whole life has led to a career working on them. I always remember going with my dad over the years, learning to hook up gladhands and kick tires at first, then upgradi... read more Heavy Duty Truck RepairBen MaurerTruck driver/mechanic at H.A. Spatz TransportLebanon, PennsylvaniaI’m a completely self-taught mechanic. I originally went to tech school for carpentry, but I gradually grew into general mechanics and repair of anything from vehicles, to printing presses, to farm equipment, to semi-trucks.... read more Automotive - General RepairGriffin AshLead Technician/YouTube personality at Griffzilla Garage & Founding Fathers AutoColorado Springs, Colorado20 years ago, I started at the bottom as a lot tech. After graduating from DADC (Denver Automotive and Diesel College), I attended and graduated from the Volvo SAFE program. From there, I rose through the ranks and became a ... read more Automotive - DealershipApril GrahamMechanic at Ray ChevroletLake Villa, IllinoisAs a kid, I loved Hot Wheels, Transformers, and my dad's '72 Chevelle. When I turned 16, my mom let me drive her 2004 Mustang to school. Little did she know, I snuck off for ladies' night at the Great Lakes Dragaway; so much... read more Automotive - General RepairJoshua LauerTechnician at Dons Auto CenterLawrence, KansasAfter 4 years of tech school in high school, I went to college and majored in automotive engineering. I graduated and worked for Toyota Motor Company in Torrance, CA. Later, I moved back to be closer to family and returned t... read more Automotive - DealershipJeffley EdouardAutomotive TechnicianElmsford, New YorkI am 26 years old, with over 2 years of "professional" experience. Prior to becoming a technician, I was a paralegal for 7 years while attending school for a BS in Accounting. While I was attending school in Plattsburgh, NY,... read more Automotive - Specialty ShopDaniel SpeeseTechnician at Foreign and domestic autocareGrand Bay, AlabamaMy grandfather passed away when I was a year old. His love of cars and mechanic work inspired me to follow in his footsteps. I hope to one day open my own shop with the family name on it like he always wanted. My quality is ... read more Agriculture Equipment RepairChris TomasikAg equipment tech at Larry Romance and SonSpringville, New YorkI've always been mechanically inclined for as long as I can remember. I started out fixing my bicycles, then I worked on snowmobiles, three wheelers, and lawn mowers. I even worked on my own vehicles. I took small engine cla... read more Auto Body/Collision RepairJessica DaubenspeckCo-Owner at Lennon's Auto BodyValencia, PennsylvaniaI've been a car nut most of my life. I took auto body repair in high school and took a job at a local parts store, which is how I met my husband, Curt. I made a delivery to his shop 25 years ago, and we've been pretty much t... read more WeldingChristy StainbackAutomotive Service Advisor and Welder at Stainback Steel WorksHenderson, North CarolinaMy name is Christy. By day, I work at a Toyota dealership as a service advisor. At night, I weld various metal art pieces or weld something that needs repair. I started out helping my husband in the shop: he restores vehicle... read more RailAndrew EpplerTear down mechanic at American Turbocharger TechnologiesYorktown, VirginiaWorking on EMD/GE turbochargers is an awesome job to have. I get to enjoy getting my hands dirty with the help of Snap-on tools! I am working in an amazing industry that serves a greater purpose in keeping the rail infrastru... read more Automotive - General RepairGary MorieraMechanic at Mont motorsNewark, New JerseyMy family members always worked in auto body shops, and I would come and visit. I grew to love anything and everything about cars so much that I started working and helping around when I was young. I learned a lot about cars... read more Agriculture Equipment RepairShawn GrotheField Tech Sup.Nampa, IdahoI work in Canyon County as a field supervisor for the Mosquito Abatement district. I have trenched through 12 years of swamps, pastures, lagoons, and every type of nasty water mosquitos breed in. The best part of our job is ... read more Automotive - General RepairBrad McCroryAutomotive Technician at United Farm and Home COOPLewisburg, TennesseeMy love of cars goes back to my dad. My fondest memories are being in the garage with him. He was a mechanic in the army and had a shop of his own. I decided out of high school to further my automotive education, so I went t... read more Automotive - General RepairAlex Veyta VargasLube technician at Crystal ToyotaThree bridges, New JerseyI am 20 years old and I started working on cars when I was 14. I fell in love with fixing and repairing any parts that were broken, and I plan on becoming a master technician. Doing maintenance and changing out filters, bulb... read more Aviation/AerospaceJosh FyeAircraft Hydraulics Mechanic at Air ForceFort Gratiot, MichiganEveryday I work on jets. As the weather grows colder, hydraulic leaks become more frequent. Whether it’s expansion and contraction or actual components breaking, I’m always fixing something hydraulic. I am a full-time SSgt i... read more Automotive - DealershipJordan WalhofTechnicianSHELDON, IowaI have always had an interest in cars. I learned from a young age that I would rather learn how to fix my own stuff than to pay someone else to do it, and that evolved into a career! I was working at the dealership by day an... read more Heavy Duty Truck RepairJacob RotenbergerDiesel Mechanic at PeterbiltGarden City, KansasMy dad is a truck driver, so I grew up around the machines and the people responsible for keeping goods our country needs in route to their destinations. From that I developed a respect and a desire to help those in the indu... read more Automotive - DealershipTJ BylTechnician at Very Hoef AutomotiveRock Valley, IowaI have been working as a mechanic professionally for 8 years now. I started to work on trucks with a friend when I was 13, restoring his '71 Chevy C10 in a storage unit. I have always enjoyed fixing things and have had a kna... read more Automotive - General RepairJesse Schillingerowner at Honest Accurate Auto Service WestColorado Springs, ColoradoHonest Accurate Auto Service. This phrase has been part of our tag line since we opened our mechanic & repair shop in Colorado Springs in 1993. Although we operated under a shortened DBA (Doing Business As) HON-DAC for the f... read more Heavy Duty Truck RepairDan GregoryDealer Technical Manager/ Diag Tech at Peterbilt of Garden CityGarden City, KansasI fell into the heavy-duty industry around 15 years ago. I came to Kansas for a fresh start and found my current Peterbilt dealer hiring. I have been working here for the past 10 years. I recently got promoted to DTM at Pete... read more Technical Education - students and instructorsMichael ZelaznyEquipment ManagerHoward, PennsylvaniaI’m a maker, a generalist, a machine operator, a manager, and a problem solver. As a child, I was always trying to take things apart. It’s how I came to understand the world, and my small part in it. You’d think a five-year-... read more Automotive - DealershipNeil WingateTechnician at Capitol Harley DavidsonHowell, MichiganAfter 23 years as a British Paratrooper, I moved to the US with my wife and decided to chase my passion for motorcycles. I applied and attended MMI in Phoenix. I started off at a dealer in Phoenix as a porter and moved up to... read more Agriculture Equipment RepairMICHAEL SUKUPTechHOLCOM, KansasI am 27 years old, and I have worked in the ag field since I was 18. I have bounced between John Deere and New Holland, and have started to work at JCB. My biggest flex is that I was able to buy my first house at 23 years ol... read more Auto Body/Collision RepairCurt DaubenspeckShop Owner at Lennon's Auto BodyValencia, PennsylvaniaI have been in the auto body repair industry for almost 25 years. I've been around cars all my life; I enjoy repairing them and, in some cases, bringing them back from the dead. In 2019, I moved to a new location, and my wi... read more Automotive - DealershipSavannah HenningAutomotive Technician at Westside Garage Inc.Princeton, WisconsinI grew up in a lower middle-class family. We often didn't have the money to buy something brand new. My dad (a former military mechanic) often used his mechanical knowledge to fix things around the house instead of calling a... read more Fleet MaintenanceBradley QuadererVehicle service technician at Milwaukee DPWMilwaukee, WisconsinI started wrenching at 8 years old, preparing cars for demolition derbies with my uncle. Before that, all I did was build Legos and tear apart VCR players and what not. Later in life, I was tasked with repairing snowmobiles,... read more Automotive - Specialty ShopAnthony CatalognaOwner/Tech at Catalogna PerformancePataskala, OhioGoing on 20 years of being a business owner in the automotive industry. I have been wrenching since I was a kid, working on grandpa's lawn mower in the backyard. I love creating something cool and making the customer happy. ... read more Construction Equipment RepairVidal ArreolaMechanic at Concrete Equipment ServicesElk Grove, CaliforniaI have always liked building model cars and planes as a kid. I would shadow my father when he would go to the PIC N PULL. Yes, back in the days when minors were allowed in. When I graduated high school, I joined the Marines,... read more Automotive - General RepairDavid HofstetterAutomotive technician at Gladney Automotive SolutionsMetamora, IllinoisI grew up working on a water well service and toying with small engines. I went to community college and continued at a university. After graduating with a degree in automotive technology, I found my way to my current job do... read more Automotive - DealershipJuan Rosas-PetrenkoSubaru Technician, Apprentice at Subaru of GwinnettSugar Hill, GeorgiaSince 2018 I've been working on Subaru's. So much so that my family made me consider applying for a job at my local Subaru Dealership. I was pretty intimated by the dealership dynamic, but once I gave it a shot, it was prett... read more Auto Body/Collision RepairRuben GandaraTechnician at Hendrick Collision CenterHope Mills, North CarolinaI picked up some basic skills in high school automotive shop and with the hunger to learn more about automobiles. I decided to get an education at UTI (Universal Technical Institute) in Phoenix, Arizona and earn a degree. I ... read more Automotive - General RepairMike CarrOwner/Manager/Tech/Fabricator/Body man/Painter at CARR'S FINISHING TOUCHHowell, Michigan40+ years of being a professional at something that I used to get in trouble for as a child: taking things apart to see how they work and putting them back together again. What once was a childhood passion, was made into my ... read more Fleet MaintenanceMitchell FreemanMechanicLennon, MichiganI started wrenching at a young age on our family farm. When I was old enough, I was able to work for my grandfather at his tractor dealership. I started with sweeping floors and washing equipment. When I turned 15, I was abl... read more Automotive - General RepairRobert McnairLead A at FirestoneForked River, New JerseyAs someone in a high position at such a young age, I have had to constantly prove myself. Time and time again, I’ve been able to earn the respect of techs twice or more my age and have made some good friends because of it. A... read more Heavy Duty Truck RepairThomas ParsonsTechnician at City of Danville, IllinoisDanville, IllinoisMy dad was a tech, so I grew up in the automotive repair industry, and aside from 8 years maintaining aircrafts in the Air Force, I've been in the auto repair industry for 30 years. For the last ten years, I've worked as the... read more Automotive - DealershipTimothy TurnerTech at Vancampen motorsWilliamsport, PennsylvaniaI’ve been working at a dealer for 12 years since right out of high school. I've always enjoyed cars, and my passion turned into a sometimes challenging but rewarding career as a tech. I am now a trans and diesel tech. Once, ... read more Powersports TechnicianKenna CampbellMotorcycle MechanicKaty, TexasMy grandfather owned an automotive shop when I was young. I would spend my summers working there, absorbing all the skills that I could. A few years ago, my father took over the shop and inspired me to follow my dreams. I we... read more FabricationRandy WalkerWelder/Fabricator at Miller Fabrication and ConstructionLovell, WyomingMy lifelong fascination with all things mechanical started with turning wrenches with my dad at 3 years old. I kept pursuing it and everything just came to me naturally. Fast-forward to present day, and now I get to spend my... read more Automotive - DealershipScott HummellAuto TechRich Square, North CarolinaI have been working in the auto industry for nine years. It started as a backup plan when I lost my opportunity to go into the shipyard for welding. Some days I look back on my choice, but I have learned so much and taught u... read more Aviation/AerospaceGabbie ShetlarA&P Mechanic at Textron AviationWichita, KansasI grew up going to airshows with my dad. I always had an interest and heart for aviation. I swore up and down I was going to be a pilot. When I was a sophomore in high school, my guidance counselor helped me get into WATC (n... read more Fork liftTim MichaelTechnicianBUTLER, PennsylvaniaI got my passion from my dad when I was 10 years old. One funny thing that’s happened was when I couldn't get a lift to start because I didn't turn on the fuel tank.
Agriculture Equipment RepairRyan BickelhauptService Technician at Frontline Ag SolutionsDillon, MontanaI grew up in eastern Washington State, away from the farm that my dad’s father had. Some of my favorite memories are hanging out with him and my aunts while they harvested the wheat they grew. My grandfather had to stop farm... read more ManufacturingNate PierceElectronics TechnicianWakefield, MassachusettsAs a kid, I loved taking things apart, fixing, learning about circuitry, as well as everyday handyman-style repairs. In high school, I worked with my uncle doing home repairs, car repairs, and messing with electronics. I end... read more Sells ToolsJames DarnellFranchiseeRinggold, GeorgiaI was a technician for 19 years. I went from certified car mechanic, to overseas FSR for a defense company, to power turbines, to master diesel technician, to finally a Snap-on franchisee brought in from my own dealer. A “ne... read more Heavy Duty Truck RepairBennett RobertsDiesel Mechanic at Roy Houck ConstructionSalem, OregonI got out of the Army after an injury and was lost. I decided to go to college to be a diesel mechanic. While I was in school, I worked full time, often sleeping at work. I have been in this industry for 8 years now. I love ... read more Heavy Duty Truck RepairJustin BlackDiesel mechanic at Tracey RoadROCHESTER, New YorkI am a 25-year-old diesel mechanic. I’ve been fixing things with motors since I could hold a wrench. I am currently restoring a 1987 Camaro LS swap in my spare time. I love what I do, plus it pays good. I'm very proud of wha... read more Automotive - Specialty ShopKasim AlamTechnology Consultant at FIHAST CorpGarland, TexasMy friend Bilal and I have been building cars in our garages together for the past 4 years. Back in June 2022, we decided to take our passion to the next level and get our very own shop. Since getting our shop, we've explore... read more Automotive - General RepairJoseph EastMechanic at East Lawnmower ServiceMineral Springs, North CarolinaMy dad started our business over 40 years ago, and we are still making and fixing. We are the oldest and most reputable shop in our area and use only the best to help our fixes last longer. My dad started the business in his... read more Automotive - DealershipCarlos LopezTechician at The premier collectionNorwalk, Connecticut
Automotive - DealershipEloy GarciaService Technician at HyundaiBuda, TexasI have been turning wrenches for about around 17 years plus. I have been able to achieve a platinum level with Hyundai – really proud of that. I’ve seen a lot of changes in the automotive world. Just like we have to buy that... read more Technical Education - students and instructorsBruce TurnquistHVACR technician at HartfordSouthington, ConnecticutI am a full time HVACR technician as well as a part-time HVACR instructor. I work on maintaining and repairing a large and unique office building in downtown Hartford, CT. Our building was the first two-sided office building... read more Automotive - DealershipAndrew MorenoToyota Master Diagnostic Technician at Fox ToyotaBig Rapids, MichiganAfter watching the 1998 Daytona 500 when I was 12, I knew I wanted to be in motorsports. Fast-forward to 2005 when I was graduating from high school and found a place that teaches working on NASCAR race cars. When going to N... read more Automotive - DealershipAndrew HaysAuto Tech at Bosak NissanCedar Lake, IndianaMy names Andrew, I’m 28 years old and started in the automotive field in 2013 at an auto salvage yard. Since then I’ve worked for Honda for a bit then moved on to be come a transmission tech for Dodge. Now I’ve set up home a... read more Automotive - Specialty ShopNathan HammNitro Funny Car Mechanic at Cruz Pedregon RacingIndianapolis, IndianaI grew up near Charlotte, North Carolina. As a kid I had always been drawn to being outside and making things with my hands. Building with toys turned into working on my own car and by high school I was learning welding and ... read more Automotive - DealershipErika KunzService TechnicianSpanish fork, UtahI got into the automotive industry when I was 16. My power steering pump broke and I didn’t have the money to fix it, so I watched a YouTube video and replaced the pump myself. Ever since then, I had known fixing cars was so... read more Construction Equipment RepairNick SpradleyShop Technician at Atlantic Coastal EquipmentLudowici, GeorgiaI was broke as a joke, and just looking for any work. I applied to over 60 jobs on indeed and Atlantic Coastal was the first to call! They needed a machine washer to wash all the rental equipment. I got the job and started w... read more Automotive - General RepairManuel NevarezAuto MechanicEscalon, CaliforniaI am nominating my fiancé, Manny. Our family has been living on one income for the past year and a half. We have two sons and Manny supports us all without ever complaining. He’s always working in the garage on side jobs to ... read more Agriculture Equipment RepairJerod JohnsonOwner/Service Manager at J. Johnson ServicesAvoca, IowaI started taking things apart as a teenager, to see how they worked. This led to figuring out why they weren't working and getting them to work. I grew up on a family farm and spent a lot of time hanging out at mechanic shop... read more Technical Education - students and instructorsSophi BenderStudentColumbus, NebraskaI am a 5 foot blonde girl with a truck that cannot even fit in a car wash! I am working at a restaurant right now since I am in school but when school is over I have a welding job lined up. School has helped me with preparin... read more Automotive - DealershipAshley BraunAutomotive Technician at DriveTimeDenver, ColoradoI'm a 24 year old who has been around vehicles my entire life. Whether it be my 4wheelers, my grandpa's hot rod, or my friend's clunkers, I've always enjoyed turning wrenches. I went to Warren Tech as a high school/college h... read more Aviation/AerospaceTyler ThachAircraft Technician at Aerospace Turbine RotablesWichita, KansasThe path that I had chosen for myself had a lot to do with my son because I had him when I was 18 years old. Having a child at such a young age was very difficult because I was still learning how to take care of myself and t... read more Aviation/AerospaceJenna ShepardAircraft Mechanic at TextronWichita, KansasI started my career in aviation in 2019. I worked as a cake decorator, a dream job of mine, but as a mom of three boys, I struggled to make ends meet. When I was offered a scholarship for the sheet metal program at WSU Tech,... read more Building AutomationAllen HongBuilding Automation System Controls Technician at Trane TechnologiesWichita, KansasI moved to Wichita in January 2019. I went to WSU Tech and received a certificate for aviation sheet metal mechanic. I was laid off in 2020, so I went back to WSU Tech and pursued an associate's degree in Climate and Energy ... read more Technical Education - students and instructorsMark DeHartSpecial Industry Training & Curriculum Coordinator at TN College of Applied TechnologyElizabethton, TennesseeI started as a diesel technician in the United States Army where I was a 63B - Wheeled Mechanic, but we worked on whatever needed to be fixed. After some years of experience, I started training other soldiers in various task... read more Road ConstructionThomas JamesCo-owner at James Seals & StripesKannapolis, North CarolinaMy parents established a road construction company in 1988, the year I was born. Today I run the day-to-day business from projects like airports, hospitals, major roadways, to restaurants and shopping centers. This entails w... read more Industrial ConstructionLondon KeanCombo Welder at Adelphi ConstructionMission, KansasI entered in this industry as a high school drop out. Being fortunate enough I had the influence to acquire a GED. I rejected an offer to become an electrician with a truck and all of the tools needed to be an independent co... read more Aviation/AerospaceReggie HongCnc mill turn operator at Textron aviationWichita, KansasI moved back to my hometown in 2019. Here in Wichita aviation is huge and I knew that if I got a job at Spirit or Textron they would pay for more school. I got a scholarship from the Metallica scholarship initiative and took... read more ManufacturingAmanda FosterComposite mechanic at Spirit Aerosystems Inc.Wichita, KansasNot knowing the difference between a sanding disc to a hand drill I enrolled at WSU Tech. I wanted a fresh start since I got my second chance at life after beating cancer at the age of 22. I took the composite courses provid... read more WeldingNoah SeiwertWelder at ProWeldPark City, KansasMy path to my career started my senior year of high school at WSU Tech. I started to gain experience and learn more about the trade. The summer going into my second year I got my current job at ProWeld and worked during my s... read more Aviation/AerospaceRyleigh FowlerWork Study at WSU TechEl Dorado, KansasI graduated High School in May 22. Since then, I have completed Sheet Metal, Composite Fabrication and as of 12/2022 Process Mechanic. By the end of next week, I will have completed Aviation Paint. Next semester, I will be A... read more Construction Equipment RepairMike MannVermeer Dealership Advanced Service Technician at Vermeer SoutheastCastelberry, FloridaI have the honor of leading our Service Team here at VSE Ocoee, near Orlando, FL. Mike Mann leads the charge in shop for all day-to-day challenges. We're supporters of Snap-on tools and appreciate the Makers and Fixers movem... read more Technical Education - students and instructorsLeah BavirshaAutomotive Instructor at Forsyth Central High SchoolCumming, GeorgiaI took automotive classes in high school. Learned from an awesome teacher. He pushed me to go to school to get more training in automotive technology. I ended up finishing my bachelor’s in automotive technology and got a job... read more Aviation/AerospaceGarrett EdwardsA&P Mechanic at Dassault aircraft servicesFernley, NevadaI’ve always wanted to wrench on stuff, that started with bikes as a kid. I eventually started working on cars and learning from my dad. I always had an interest in airplanes and that’s where my wrenching shifted and I couldn... read more Automotive - Specialty ShopEd AngelesUpholstererPort Hueneme, CaliforniaI am living the dream. I completed 26 years in the US Navy, got bored, so I enrolled at the local adult school. At 55 y/o, I learned upholstery and now I am making custom seats for an award-winning shop in SoCal. I never tho... read more Heavy Duty Truck RepairJacob CampbellHeavy Duty Diesel Mechanic at Redmond Heavy HaulingGresham, OregonI started out working on diesel pickups, then moved on to farm tractors. I am now working on heavy haul trucks and trailers, and I love it. Each day is something different and always a bit of a challenge.
Aviation/AerospaceMicah OliveraWildland firefighter/ Rappeller at United States Forest ServicePendleton, OregonI work on a forest service rappel crew rappelling into remote fires all across the us. When there is down time I cook for the crew and run a bbq page. The job has a lot of improvisation and fixing stuff on the “fly”. While i... read more Automotive - General RepairOwner at Welding Women SyndicateOwner at Welding Women SyndicateSalinas, CaliforniaSingle mom turned welder… A 26-year journey that now allows me the opportunity to teach others to weld, give back to my community and work on amazing custom vehicles. One of the coolest flexes about my life was having the op... read more PipeJohnny MartinezElectric Plumber WelderPhoenix, ArizonaI started as a welder assistant, and from there went to pipe fitting. I did that for a while and then at the very end I started to do HVAC. I have worked in many fields and am fortunate to have been able to work with great m... read more Auto Body/Collision RepairLes KaneshiroBody and Fender at City and County of HonoluluWahiawa, HawaiiThis guy that I’ve been married to for over 20 years wows me to this day, with his quick wit and talent. From mechanical to cosmetic, Les is awesome with cars! He gets the job done and doesn’t cut corners. That’s just the pe... read more Construction Equipment RepairDavid Burbrink#1 Shop Technician at Boyd CatEmerson, KentuckyGrowing up my dad was the only local automobile repair shop. I grew up around mechanics all of my life, so I learned I wanted to become a mechanic myself. I was interested more in the diesel machinery side than the automotiv... read more Technical Education - students and instructorsJonathan WeissStudent Machine Shop Assistant at Penn State BerksEphrata, PennsylvaniaI am an electro-mechanical engineering technology student. I currently have an internship as a field test engineer working on combine harvesters! I always loved working with tools since I was 3. I always wanted to be an engi... read more Fleet MaintenanceBob GoodrichOwner at Goodrich Trucking and ExcavatingAvoca, New YorkMy dad dropped out of high school at the age of 16 and started his independent trucking business. Since 1970, his company has grown to be extremely well known in the area. He's still independent, but has a fleet of four tri... read more Fleet MaintenanceRyan GoodrichOperator at Goodrich Trucking and ExcavatingAvoca, New YorkRyan is one of the hardest working individuals I've ever known. He plays hard, loves hard, but works HARDER. He is a car enthusiast who has owned upwards of 90 vehicles in his short 39 years. He has had everything from a 192... read more Mobile Technician - Gas/DieselHugo CarrenoChief Technician/Owner at L.A. Autowerks LLCLos Angeles, CaliforniaI pursued a mechanical engineering degree after falling in love with my 1997 Honda Prelude Project. I graduated in Aug. 2018 and two years after decided to go into business as a mobile tech putting everything I’ve learned th... read more Construction Equipment RepairHalley Riley-ElliottSnowcat Mechanic at Okemo Mountain ResortProctor, VermontFrom nursing to working on Jeeps to pageants, I found my passion. I went to VTC and graduated last May with an associate’s degree in diesel power technology. I also hold the title of Miss Proctor USA, and was voted Miss Cong... read more MarineGabe StaianoOwner & mechanic at M&G Marine Corp.Syosset, New YorkAt the age of 18 after graduating high school I wasn’t sure what I wanted to do as a career until the moment I picked up a Snap-on ratchet and started a full time job at a local Yamaha outboards dealer and shop. I’ll be hone... read more Automotive - General RepairWilliam AltamiranoTechnician at WillautoWest Chicago, IllinoisI got started in the industry back in 2005. I was always interested in the automotive field. At a young age I thought it was really cool how to repair, diagnose, and modify engine performance. I decided to enroll into UTI in... read more Automotive - General RepairMichael MulkeyTechnician at Bradshaws service centerPortland, OregonI graduated from Clackamas Community College in 2012 and have been with Bradshaws Service Center ever since. One of my hobbies is painting. I am still finishing up my Anime tool box. I am currently restoring a 1957 Ford Fai... read more Automotive - DealershipTucker FindleyAutomotive Technician at Toyota of BoerneSan Antonio, TexasI grew up with Legos, then moved on to my mother’s broken appliances, then to our small machinery, and so on and so forth. Next thing I know, I’m about to be a master technician for Toyota, where I am currently doing diagnos... read more Automotive - General RepairVictor HernandezMaster Technician at Linden CaValley springs, California
Automotive - DealershipLiam StoreyAutomotive Technician at Benson LincolnJefferson Hills, PennsylvaniaI grew up in a garage with my grandpa and always have had a passion and interest in cars. As I got older, I realized that I truly did enjoy working on cars and could see myself doing this as my career. I went to a vo-tech sc... read more Construction Equipment RepairLyle BaumgaertnerHeavy Equipment Mechanic at Equipment Share BoiseNampa, IdahoI was a soldier in the U.S. Army for 7 years working on communication systems. After getting out, I continued to work in IT and communications while also developing a costly Jeep habit involving mechanical and fabrication wo... read more Automotive - General RepairChris EnrightOwner at Enright AutomotiveAlexandria, OhioI started in the automotive industry just over 12 years ago working for a small independent shop. I learned quite a bit working there, but was always passionate about Hondas and wanted to try working for the dealership. So I... read more Fleet MaintenanceJoe GadaMechanic III at Town of Colchester Fleet MaintenanceMontville, ConnecticutI've had a wrench in my hand since I can remember. "Maker and Fixer" defines not only my life, but my father's and grandfather's as well as uncle's and aunt's, cousin's, and friend's lives. When I am not working my day job a... read more Automotive - Specialty ShopDillon CunninghamDiesel Pickup Mechanic/Owner at Elite Diesel & Automotive RepairWausa, NebraskaSince high school I have wanted to start my own shop. At 25 I got married, built our shop, started our business and had our first child all in the same year. We are going on our 8th year now and have since added 2 full time ... read more Fleet MaintenanceEd DiGiorgiDiesel MechanicProspect, ConnecticutI have been a truck and equipment mechanic for the past 15 years. I got started at an independent shop where I started sweeping floors and made my way up to being a technician. A few years later after some time at a dealersh... read more Towing and Repair, including American V-Twin MotorcyclesMilo ConnorOwner at Milo's Towing & Repair, LLCPrairie du Chien, WisconsinI started this business 5 years ago with my son, Blaine. We are currently running five tow trucks - providing light, medium, and heavy duty towing and recovery; two service trucks, and multiple trailer hauling equipment. Pri... read more Automotive - DealershipNestor AntonioGM/Cadillac and Mazda Master TechnicianAutryville, North CarolinaI am Nestor Antonio. I am currently employed at a family owned dealership that has multiple lines of vehicles. For example, Buick, GMC, Cadillac, and Mazda. I have been turning wrenches for four years now. Throughout the fou... read more Auto Body/Collision RepairJeff MasonAuto Body Technician at Service King CollisionColorado Springs, ColoradoI spent 12 years as a car audio/video/security tech. It was a fun job, but after having 2 daughters with my wife I decided working retail hours was no longer for me. I wanted my wife to be able to stay home with our girls an... read more Heavy Duty Truck RepairDelaney McAvoyDiesel Mechanic at Highland Park DPWEdison, New JerseyI have been in the field for 10 years now. I enjoy hiking & riding ATVs with my dog, tinkering with things, creating and building new things, anything with an engine (gas or diesel). I am also a fire fighter with the Highla... read more Agriculture Equipment RepairConnor PierceSmall Engine Tech at American PrideZanesville, OhioFive years ago I had absolutely nothing, my tool box was a plastic Walmart tote. Throughout the course of a few years and a few paychecks, local dealer Todd Baker went above and beyond to help me get on my feet and where I a... read more Automotive - General RepairNate LarocqueTech at Precision AutomotiveKingman, ArizonaSince I was a kid I always enjoyed working on cars. I used to help my dad work on sandrails and VW's. I worked at a tire shop at 15 years old. Then I went into construction for a while. Then I got hired at a Chevy Dealership... read more RacingJohn OlsonEngine Builder/ Pro Stock Car Chief at ARC Race Engines/MotorsportsMorris Plains, New JerseyI basically grew up with a wrench in my hand. My father had an automotive repair shop in NY, for close to 40 years. I grew up in the shop taking apart blown engines at the age of 5-6. I have also been involved with drag raci... read more Aviation/AerospaceAmanda HillGM and Lead Tech at A and J AviationGranite City, IllinoisI am 29 years old and I started right out of high school. I have a degree in aviation maintenance technology. I did 4 year program in 1 year to get into the field and am now about 10 years in. I have a love for airplanes and... read more General ContractingEric HinermanPresident/Owner at Diversified Applications Corp.Thurmont, MarylandMy journey began doing small odd and end jobs, working out of a 1991 Honda Prelude with a small Snap-on tool box perched inside. As my desire to expand my horizons grew, an opportunity presented itself for me to enter the ut... read more Automotive - DealershipAna BroylesBMW Master Technician at BMWAshburn, VirginiaContrary to what people usually expect, I have never been what you would consider a car "enthusiast". Growing up in a small town In Colorado, I never had exposure to the car scenes or any type of Motorsports. I did enjoy pro... read more ConstructionDan BirchCarpenter at Riley Construction Inc.Kenosha, WisconsinI have been in the construction business for 25 years. I am currently working on the Snap-on addition in Kenosha, WI!
ConstructionLon RothwellForeman at Riley Construction Inc.Kenosha, WisconsinI have been doing this for 6 years now! I am currently working on the new Snap-on addition to their headquarters.
ConstructionAaron HycheIron Worker at Area Erectors Inc.Kenosha, WisconsinI have been an iron worker for 15 years and am currently working on building the new Snap-on addition to their headquarters in Kenosha!
ConstructionMike SwantzProject Superintendent at Riley Construction Inc. Raymond, WisconsinI have been working with Riley Construction for about 30 years now. I never pictured myself working for a construction company for this long, but Riley is a solid company! I love seeing a project come together from start to ... read more Heavy Duty Truck RepairHeather DorrisDiesel Tech at Penske LogisticsDallas, TexasI did a career change midway in my 30's. I have been around heavy duty all my life because my dad was in the oil industry. I was an athlete on scholarship and went to a 4 year university. I thought I was going to be a teache... read more Construction Equipment RepairAdam KochField Mechanic Omaha, NebraskaI have worked for Nebraska Machinery for 16 years. I have been working in the field for almost the last 4. I currently work on Caterpillar construction and mining equipment!
MarineThomas WilliamsMechanicCrestview, FloridaThomas is so deserving of any type of recognition, but especially with Snap-on. He wears one of his antique Snap-on hats anywhere we go, excited to show his dedication to the company! He’s SO dedicated to Snap-on Tools. He’... read more Automotive - Specialty ShopJohn BasslerOwner/Operator at Vintage Motorcar CompanyInwood, West VirginiaI became interested in cars at an extremely young age. One of my first childhood memories is about sitting in the front seat of my dad's Pontiac Bonneville convertible. I tinkered with cars throughout my life and, after gr... read more Fleet MaintenancePatty AlonsoAuto Equipment Tech at VerizonJersey City, New JerseyI was born in Mexico and joined Verizon in 2015. I was the only female tech in Verizon's fleet garage. My father encouraged my love of fixing cars, but at my automotive training school in Mexico, my fellow students and teach... read more Automotive - DealershipRicardo ChotoDiagnostics Specialist at Contemporary Motor CarEdison, New JerseyI have a been in the automotive industry for over 20 years and over 15 years with the Mercedes-Benz brand. Since I was a kid, I used to fix everything on my bicycle and toys, so it was pretty much a passion that I developed ... read more Auto Body/Collision RepairGianna TrapaniPainter Staten Island, New YorkI am a female car painter. The coolest project I have worked on was a 1972 Corvette! Right before clearing, I went to tack the base and found a spot that needed a little more paint and the cup wasn’t tight enough, so paint s... read more Automotive - General RepairRonald MillerMechanic/Manager at Franklin Lube and RepairFranklin, North CarolinaMy name is Ronald Miller and I have been taking care of the people in my community and their vehicles for over 10 years. I pride myself on the integrity and honesty. With that honesty, I give my customers no doubt that when ... read more Automotive - Specialty ShopJacob DeanOwner/Technician at RPMRACINGSandy, OregonHi my name is Jacob Dean and I have been using Snap-on tools since I could pick up one of my dad's wrenches! He's always only used Snap-on tools, and that tradition has been carried on to me, and now my son. I was also featu... read more Automotive - General RepairPhilip DefiglioOwner/ President at PATD Enterprises/ Michael's AutomotiveBallston Spa, New YorkI have been obsessed with cars since I was 15 and helped a friend's dad restore his 69 Camaro. I started as a body shop helper and transitioned to being a detailer at a Honda dealership. I kept working in different aspects ... read more CyclingColin WilliamsPro Bicycle MechanicLongmont, ColoradoI was working in the automotive industry, saving all my money to do track days and get into racing and would ride bikes every day after work with a co-worker. I got into racing and fell in love with the mechanical and physic... read more Construction Equipment RepairJames WestWelder at Milton CaterpillarSyracuse, New YorkI'm a welder for a Caterpillar dealership and I weld on large earthmoving machines everyday. I also precision tig weld in the cryogenics industry. My wife and I had our first son last year and today he turned one!!! I'm sure... read more Automotive - Specialty ShopDave SellickProduct Support Engineer at VWMacomb, MichiganHey Makers and Fixers! A little I can say about myself is I'm a car guy! I started off at a community college dealership apprenticeship program called CAP. I worked at a dealer for a while and started climbing my way through... read more Construction Equipment RepairJeffrey MoellerShop Foreman, Lead Mechanic at Paving Solutions, Pro Site WorkMonroe, New YorkI grew up on the farm fixing and using machines on a daily basis, from starting at a young age until I went to school. I went WYO Tech in Blairsville, PA to get my education to become a diesel tech and fabricator. Shortly af... read more Automotive - Specialty ShopJohn De BarrosAOA Racing at AOA RacingKennesaw, GeorgiaI bought my first set of Snap-on sockets in December 2000 and have not looked back since. All the tools I own are Snap-on. At a recent road race event (Petit le mans) we entered our Audi TCR LMS in the Fox Factory 120 race a... read more RacingJoel KelloggLead Vintage Racing Tech. at Scott Borchetta RacingNashville, TennesseeI moved to Nashville to restore classic Jaguars from Kansas. In Kansas, I attended McPherson College and received a bachelor degree through their automotive program. After working on Jaguars for 2.5 years I left and went to... read more Automotive - Specialty ShopMadison AlexanderOwner/Painter at Riveting RidesMilan, TennesseeMy name is Madison Alexander, I am 27 years old, and I own my own hot rod shop called Riveting Rides. I guess we would be classified as "makers" because we build one off, custom cars.. and it is the best job in the world! I ... read more Heavy Duty Truck RepairShayne OlsenDiesel Mechanic at The Pete Store Fort PiercePort Saint Lucie, FloridaI grew up having one of those plastic tool benches as a child with fake hammers and screwdrivers. Pretty crazy the things you get attached to as a kid. Who knew I would have a 68” EPIQ filled with real tools one day. I’ve al... read more Elevator InstallationJordan RyanElevator Mechanic at KoneOgden, UtahI'm from a multi generational line of constructions workers. My dad, grandpa, and great grandpa were all electricians. I'm the first to branch out and get into the elevator industry. I've always been good with my hands and I... read more Automotive - General RepairZachery JonesLead Technician at MonroLebanon, New HampshireWhen I was in my early teens I started in the food industry where I thought I'd be forever, but at 17 years old I left home to find my calling which really just ended up with me living in my truck. In 2018, a good friend of ... read more Small engine repairWilliam LaParrTechnician/Owner at Northern Power Equipment RepairBuckly, MichiganI am 23 years old. I went to tech school during high school for small engine repair and worked in a shop since the day I graduated. In the summer of 2021, I decided that I would open my own shop out of the house with my lovi... read more ForestryJared WalkerForestry Equipment Technician at Ricer Equipment Inc. Summersville, WVSummersville, West VirginiaAs a graduate of Nashville Auto-Diesel College 2006, I have experienced an unbelievable career. Starting as a line tech at a Toyota dealership, I never dreamed of the potential that a career in the mechanical/technical indus... read more Automotive - DealershipCharles SelfFord Service Technician at Bozard Ford LincolnGreen Cove Springs, FloridaI started blue collar work when I started high school. My high school was in my home state of Massachusetts and it was a Technical Vocational school. I spent my years in high school learning how to become a machinist. Learni... read more Heavy Duty Truck RepairCaleb StarkCrane Mechanic at Gloucester TerminalsBellmawr, New JerseyI’m 21, I work on cranes and reach stackers. I have been in the field for 5 years. I work on motors, gearboxes and electrical. I took a ship to shore crane from diesel and completely turned to electric, it was my coolest pro... read more Automotive - General RepairChris ArmendoOwner/Operator at Armendo's Foreign AutoBoylston, MassachusettsI am 28 years old. Opened an auto repair shop in 2018, leasing a single bay low ceiling doing everything by myself. I bought a shop and moved into it in April 2020 at the beginning of Covid. Wasn't sure we'd make it, but bus... read more Construction Equipment RepairMario SerraStudent/Diesel Technician at Alfred State College & Five Star/John DeereHOLLAND, New YorkI am in my freshman year at Alfred State College of Technology studying to be a diesel technician and am employed during my school breaks and summer months at Five Star/John Deer in Western New York, hoping to be a field tec... read more Automotive - General RepairTim CainOwner/ Tech. at T.C. Auto RepairColliers, West VirginiaI opened T.C. Auto Repair over 19 years ago. I was a tech since 1985. I’m ASE certified, a state inspector, and a Snap-on customer for 36 years. A 1981 pro stock Camaro was my coolest project!
Automotive - General RepairDavid HilderbrandAutomotive at Hilderbrand AutomotiveMilan, TennesseeI've grown up my whole life working on cars and I've been a mechanic for 20 years or more. Cars have always been my passion and hobby for as long as I can remember. The coolest project I have ever worked on has been building... read more Construction Equipment RepairJose GonzalezShop Manger at Chagrin Valley PavingParma, OhioI started as a yard manager and 6 months after I started I became shop manager! I always help my guys to try and stay ahead from using the plasmas cutter to setting up a truck with strobes, I’m not the type of boss that keep... read more Agriculture Equipment RepairTyler MaxwellHeavy Equipment Operator/MaintenanceEllsworth, WisconsinI have been turning wrenches professionally for 10 years. I started in the automotive industry with cars and light duty trucks. I later moved on to heavy ag equipment and heavy trucks. We had a machine/tree encounter that ca... read more Construction Equipment RepairReuben ZettlemoyerForman/Technician at New Enterprise Stone & Lime Co.Kempton, PennsylvaniaMy name is Reuben Zettlemoyer, I love to work on equipment and heavy trucks. I have around 10 years of experience in this field, and have had different jobs requiring me to purchase tools. I live on a farm in Kempton PA. Gro... read more Construction Equipment RepairMike ZulloShop Manager at LaMay & SonsHuntington station, New YorkI started off work for my father doing landscape construction around 5 years old and was hooked by the trucks and equipment. I worked anytime I had off from school. I went to Wilson Tech during high school and had a scholars... read more Oil & GasTravis TaylorMechanic at Pacific PetroleaumSanta Maria, CaliforniaI'm a life long Snap-on tool user and a 3rd generation one. My grandpa and dad owned a foreign car repair shop and were Snap-on diehards. Repairing mud pumps, when they are drilling new oil/gas wells is the coolest. And work... read more Automotive - General RepairRoger RacineOwner at Dependable Auto RepairGassville, ArkansasWhen I was 6 or 7 years old my grandpa had a mechanic shop. I had a lemondade stand in front of shop and with money I made I bought tools. My dad went to school for auto mechanics. After school I would hang at the Ford deale... read more Auto Body/Collision RepairAshleigh MaloneyAuto Body Tech at John Mugavin AutobodyCincinnati, OhioMy name is Ashleigh and I am a 16 year old female Auto Body Technician. I currently attend vocational school and am in my first year, however I’ve been working for a body shop since April. I work as an apprentice under the o... read more Oil & GasLevi MitchellField Service Technician at USA compressionMontrose, PennsylvaniaI'm a father of four beautiful daughters, I grew up in a small town working on farms and doing miscellaneous work for family and friends, and I have moved my passion for hard work and providing for my family into working in ... read more ManufacturingMatt RogersService Technician at MC MachineryELGIN, IllinoisWhen you have an uncle and two cousins who work for Snap-on, it's some time hard to say no to the newest tools hahahaha! A robotic tool changer for a press brake is the coolest project I have worked on. Watching people brake... read more RacingClayton FeineOwner at Feine Tune MotorsprotsZumbrota, MinnesotaWe are a family owned motorcycle race shop that specializes in off-road motorcycles offering a full service shop as well as a trackside support truck. Restoring a vintage motorcycle for a customer to do shows with was the co... read more Automotive - General RepairBrian BriesTech at Meyer Collision and Service CenterGuttenberg, IowaI went to school for automotive and built up from there. I ran a shop for a few years and doing so I learned customer relations and estimating. The shop that I work at started out as a collision shop and more people started ... read more Heavy Duty Truck RepairRay RamardService Manager at East Coast Fleet ServicesBethlehem, PennsylvaniaAfter 32 years of driving trucks and trailers, I wanted a career change. I did road repairs on the side and my boss saw my talent as a mechanic. In 2010, I started working as a mechanic climbing the ladder at a couple of dif... read more Automotive - General RepairJoey Romaniello jrManager at East Coast Towing and Auto BodyStamford, ConnecticutI work for my family's towing, auto, truck repair and body shop. We are a one-stop-shop working on anything from cars to 18 wheelers. I do maintenance of our fleet and electrical repair on vehicles in the shop as well as run... read more Agriculture Equipment RepairSteven RernleitnerTech at RdoRedfield, South DakotaI worked for Ford for five years. I moved over to Rdo and I’ve worked with Rdo for five years. I love working on John Deere equipment and love our Snap-on rep too. All projects are cool!
Automotive - DealershipTyler DowningShop Foreman at Tom Ahl Buick GMCLima, OhioI started working on stuff as a kid with my Dad. I have worked in a GM dealership since 2010. I love being on the lake waterskiing and spending time with the family. I also love to see the innovations that Snap-on continuall... read more Automotive - Specialty ShopDarrell CornettOwner/Master Tech at First Response Emergency Lighting LLCHanover, PennsylvaniaI am the owner of a family owned and operated Emergency Vehicle Up Fitting company. I was in the field for over 10 years before I took the leap and went out on my own. Now I have three full time employees (myself, father, an... read more Automotive - Specialty ShopRebecca RohlandAutomotive Upholstery Restoration at Blackcat Vinyl & UpholsteryMedford, WisconsinI received my Associates in Veterinary Technology, became a CNC operator for S&S Cycle, and then lost my job due to Covid. I fell into an opportunity to become an upholster at an automotive restoration shop. The local trimme... read more Fleet MaintenanceLogan McNultyDiesel MechanicWarren, New JerseyLet’s start off by saying some back story. I’m 19 currently and grew up with a white collar father. Back in his day he was a mechanic and taught me a lot growing up. Him and I would work on everything from lawn mowers, to Ku... read more Automotive - Specialty ShopJeff SvacinaAlignment SpecialistSterling, ColoradoI started in the automotive industry in 1987, the last 16 years have been strictly alignments and suspension work. Before that it was pretty much everything that came in. Being in a farming community you see a variety, it ca... read more Automotive - General RepairDonald GlazeOwner at WesDon Automotive Services, IncEUREKA, MontanaIn June of 2008, after many years of working for other automotive shops, with the help of some friends, my family and I opened WesDon Automotive Services. Our very own automotive repair shop in Eureka, Montana. We borrowed i... read more Mobile heavy truck and equipment repairTim JacksonOwner/Mechanic at J & H Mobile RepairBoring, OregonHi my name is Tim, I grew up in Florida but moved to Oregon 6 years ago. I am an Army vet with 16 years of on-and-off mechanic experience. I started my business 2 years ago and have been booming ever since. This dream starte... read more Automotive - General RepairShawn BarkerPresident at Barker Gang CustomsRockville, IndianaMy grandpa retired from GM and my dad started a body shop in 1972 where I worked with him for years. In 2003 I started my own corporation and grew from a 2,400 sq ft building to a 16,000 sq ft building. I have customers in b... read more Automotive - Specialty ShopPhil RodzonOwner at Transworx LLCJenkins Township, PennsylvaniaI wanted to do this since I was 10 years old and actually got started at 15 years old. I started preparing to own my own business 5 years ago and I opened in January of 2020!
Automotive - DealershipBrody BarnesTechnician at Ideal WheelsSioux City, IowaStarted wrenching at an independent shop, then branched out and went to work for the local Ford dealership. I worked 8 years for them and become a Master Tech. I had some friends switch to a used car dealer and loved it and ... read more Automotive - DealershipDylan HensleyTechnician at Harrisonburg HyundaiCrimora, VirginiaI started at Hyundai part time while still going to high school and as soon as I graduated I went full time, got my state inspection license and now am a certified Hyundai technician. Working on my '69 Camaro drag car and my... read more Automotive - General RepairCody DeVoreMechanic/Shop Owner at DeVore's AutomotiveRed Banks, MississippiMy name is Cody DeVore. I’m 27 years old, married, and have 4 wonderful children. I grew up working in the shop with my grandpa Daniel DeVore, he put me on the path to becoming a mechanic. I learned so much watching and help... read more Automotive - DealershipChris BreuerLine Tech/Body Shop Mechanic at Elco ChevroletWATERLOO, IllinoisMy name is Chris, I'm 37 years old and have been working in a shop since I was 16. I practically grew up working on cars since I could hold a light for my dad. He taught me a lot growing up. He's a retired diesel mechanic. F... read more Automotive - Specialty ShopTodd MassageeOwner at Master Tech AutoHickory, North CarolinaWhen I was 19 years old, I went to work for Hendrick Motors as an intern. My jobs consisted of mopping the floors every evening after the techs had left, taking out trash and shadow the older techs throughout the day. I was ... read more Automotive - DealershipNick SorensonTechnician at Don Peirson Ford LincolnDickens, IowaI've been in the automotive industry since a young age. I built my first vehicle, worked for private gas station as a lube tech to start my career in the industry, went to college to further my education and from there I sta... read more Automotive - General RepairSteve OlsonManager/Mechanic at Prairie AG PartnersArlington, South DakotaI have been a automotive/truck mechanic for over 20 years. I also have been in a small engine repair shop for a few years. Grew up on a family farm where if it broke we fixed it. I have always enjoyed taking things a part an... read more Automotive - General RepairScott JarvisAuto TechnicianLake Luzerne, New YorkI have 35 years experience in the automotive, collision and power sports industry. I enjoy the outdoors and stock car racing. Working on my father’s airplane, and building and racing dirt modified race cars are the coolest t... read more Automotive - DealershipDilan LaubenthalTechnicianSpencer, IowaI grew up around cars learning from my dad at a young age. I graduated college in 2016 and have been a technician with a used car dealer in my town ever since. Over the last 5 years I have grown from doing little jobs to doi... read more Steel MillMichael SchmidtElectrician at Phoenix ServicesBurns Harbor, IndianaI started in the automotive industry in 2001 and slowly progressed for 2 years before I switched to construction. I started traveling as an electrician for the last 2 years. I started in that role because I got a call to com... read more Automotive - General RepairBrandon WilliamsLead Automotive Technician at Lael's International Auto ServiceVista, CaliforniaBegan my working career in the United States Marine Corps. During that time when I was in the states and not deployed, I needed to have a second job. My current boss opened up his shop here in Oceanside, CA in 2006. I worked... read more Automotive - Specialty ShopThomas HopperLead Tech at Dallas PerformanceDallas, TexasI grew up in my dad's hotrod shop. Always loved cars and making them faster. Now I work at Dallas Performance building some of the fastest Lamborghinis in the world. A twin turbo V10 / Superleggera swapped Nissan Patro for p... read more Automotive - DealershipJesse FraleyTechnician at ToyotaGoshen, OhioMy name is Jesse Fraley I’ve been a technician with Toyota for close to 8 years and a technician in general for over 10 years. My '99 Cobra and my 2014 Coyote are my coolest projects. I had my buddy in the trunk of a car loo... read more Automotive - DealershipTodd SnyderAutomotive TechnicianCincinnati, OhioI have been an automotive technician for 10 years, and a dealer tech for 4 years. I plan to start a Snap-on franchise after I’m done wrenching. A 1970 Dodge Challenger 440 with a 4spd is my coolest project. I have spent the ... read more Heavy Duty Truck RepairJavier Rios AguirreHeavy Mechanic Repair at Diesel CompanyArcadia, CaliforniaI grew up always working with my hands. Whether it was cars or handyman work, learning it all from my father. I studied diesel and graduated in 2018. After graduation I was hired as a helicopter mechanic where I tore down en... read more Automotive - DealershipRussell TurrellAutomotive Technician at Temecula HondaTemecula, CaliforniaI started working on cars when I was younger with my father and later in life I realized I should do this for a living. I went to UTI for school and started working for Hyundai as a lube tech for a few months. I worked hard ... read more Automotive - Specialty ShopSean McCallOwner at Motor City TransmissionsFruita, ColoradoI started working on cars when I was 11. I purchased a 1965 Ford Ranchero and learned by my dad's side. My dad recently died and I had worked for/with him for over 32 years. Now I’ve had to go out on my own. It’s been hard b... read more Automotive - DealershipThomas ShawAutomotive Technician at Anderson and SonsPalestine, IllinoisI started out by learning auto repair on my own vehicles due to family not having the funds to do so and gradually and naturally grew into doing all of my family’s repair. I’ve had uncles and both grandfathers that were tech... read more Automotive - DealershipDerek ChavelasTechnician at Hyundai DealershipChula Vista, CaliforniaHi, I’m a 23 years old from San Diego, CA, I’m a U.S. Marine Veteran, I haven’t been working in the automotive industry for too long as I just got out of the military. But I’ve been working on cars my entire life. I really g... read more Auto Body/Collision RepairDrew BryantPresident at DB Orlando Collision Inc.ORLANDO, FloridaDB Orlando Collision Center has been a vision of mine for many years. We have built this business solely off of offering trustworthy, reliable car repair services to the public. We offer services for collision and maintenanc... read more Automotive - DealershipQuinn HallTech 2 at DrivetimeTroutman, North CarolinaI'm a former soldier and a father of two and a husband! I am originally from Brooklyn, New York. What gets me up and at it day after day after day is that feeling of someone depending on me and having to get it done. At the ... read more Auto Body/Collision RepairBri PerezOwner Bodyshop/Dealer at L & B Custom Auto Body Shopconnelly springs, North CarolinaWe had to completely paint an old Mercedes. I thought it was cool because of how the car was built and put together. I had a customer come and ask to use the restroom and when he flushed for whatever reason he used his foot ... read more Auto Body/Collision RepairShane PartonOwner at Shane's Body ShopPoulan, GeorgiaI started in '91 by sanding and taping at a Ford dealership. After 3 years of being there, I became body shop manager for 12 years! After that, I owned my own business for 18 years now. I have done a lot of insurance work an... read more Heavy Duty Truck RepairDustin GlazeForeman at Wisconsin KenworthRICE LAKE, WisconsinI've been around the trucking industry most of my life. My mom is an owner operator. I started working here at Wisconsin Kenworth in 2013 right out of high school as an apprentice tech. In 2018, I became the second shift for... read more Heavy Duty Truck RepairAndy BayerOwner at A B Fix ItLake Geneva, WisconsinI started wrenching at 15. I grew up on farm with a shop located on it. I started working on semis and tractors, over the years I started working on cars and diesels trucks. We opened the shop to the public for the last 4 ye... read more RacingColton CainRacecar Mechanic at Cruz Pedregon RacingIndianapolis, IndianaEver since I can remember, I have always enjoyed working on anything with a motor. After attending New Mexico State University for two years, I realized the passion just wasn’t there for engineering. I made the decision to a... read more Automotive - General RepairJohn PallanSenior Technician at Tech 3 AutomotiveClaremont, North CarolinaI have 14 years in the industry professionally, but I have been working on vehicles of all types since the age of about 7. I am a current member of the U.S. Navy Reserves with 16 years in and 5 deployments. I grew up doing w... read more Heavy Duty Truck RepairJosh BalkOwner/MechanicThorp, WisconsinI chose to be a mechanic instead of a farmer. At 16 years old I started working for a repair facility. My first tool was a Craftsman. At age 18, I purchased my first Blue-Point box and have stuck with Snap-on tools ever sinc... read more Automotive - General RepairJoseph WellsHead Tech/Manager at 1st Street AutomotiveSt Louis, MichiganMy love for the auto repair industry came from my Grandfather Harley Wells. From the time I was old enough to walk, I was stuck to his hip in his shop. Every school break during the year and summer break I would be with my G... read more Automotive - General RepairJack NollOwner/Technician at Jack's Automotive Independence, KentuckyI've been an auto technician for 28 years, I have an Associate's degree in automotive and business. I worked two jobs since I was a young kid. My grandpa worked for the railroad and worked on cars in his spare time. I went t... read more Heavy Duty Truck RepairScott Miles TreadwayOwner at Double OO Diesel LLCMarshall, North CarolinaAfter working almost 20 years for a corporate truck shop - I decided to go on my own - be my own boss. That was in 2017 with no investors, no promoter, no advertising and just clients who knew my history. I run my business ... read more Automotive - General RepairJim MerklMechanic at Champlin SinclairChamplin, MinnesotaI have always loved cars. I bought my first car at the age of 12, but my father made me give it back. That was my first experience with a car. Then I bought another one, but this time I didn’t tell my father where I kept it.... read more Automotive - General RepairPaul CompolyAutomotive Technician at Jack Williams Tire & AutoEast Stroudsburg, PennsylvaniaMy name is Paul Compoly. I started off in the automotive industry graduating from NASCAR Technical Institute in 2004 . Going to NTI was a great experience especially when you enjoy racing. I was lucky enough to have Carl Edw... read more Automotive - DealershipChad TaylorDiesel TechnicianUniontown, OhioI have been a GM tech for almost 11 years and then been a diesel tech for about 8 years. I am currently working on twin turbo Duramax that caught fire. Replacing wiring harness and other parts on it.
Aviation/AerospaceJoe BarnesA&P Technician at Jet Yard Aviation ServicesTucson, ArizonaBeen in Aviation for about 14 years. I served in the United States Air Force for 5 and a half years working on F-15's. Have been amazed at how far tools have come and how much easier it has made the job. There have been many... read more Automotive - Specialty ShopLee FleckOwner/Operater at Fleck's High PerformanceApple Creek, OhioI graduated from the Ohio Technical College in the top of my class with an Associate's Degree in Applied Science and Diploma in High Performance and Racing. I am constantly continuing this education through the HP Academy an... read more Welding/Metal FabricationJesse NovakOwner at Bones Welding IncCairo, New YorkI started welding in 2004 when I was 16 through the Boces program at my school. I started Bones Welding Inc. in 2014. The business has evolved every year since then, but I have been able to work in a variety of fields rangin... read more RacingJohn GregoryRetiredPort St. Lucie, FloridaJohn was nominated by his wife Jody for being a world famous motorcycle builder. John built his first bicycle from junk yard parts at age 8. By 14 he was driving and repairing his Dad’s dump truck. John started racing when d... read more Automotive - DealershipBill ObergGM Master Technician at Palmen MotorsKenosha, WisconsinI have been in the car dealership business fixing vehicles for 39 years. I achieved GM World Class Tech in 2007.
Automotive - DealershipJacob SnelsonShop ForemanBartlesville, OklahomaI started doing small modifications to my cars as a teen. That’s what pursued my interest in the automotive industry. In 2005, the dealership I currently work for hired me as an accessory tech. They later offered to sponsor ... read more ManufacturingDavid ThompsonMachine Repair/Machinist at ChryslerKenosha, WisconsinI bought Snap-on tools over 50 years ago. They never let me down. I still have them. I have a Snap-on wrench tie tack that I have had for 40 years. We were having our luggage scanned and they saw a wrench. When we showed the... read more Motorcycle sales, service, custom builderDavid KeslerOwner/Operator at Stoney Creek Cycles- Sinister Custom CyclesDauphin, PennsylvaniaI have been in business for 25 years, at this location. In that time, I have seen trends in the market change, I have seen trends in the tool market change and some for the good - some not. I recently opened a car lot and an... read more Wrecking yardTaylor PriceOwner at Midvale All Small Auto, IncMidvale, UtahThis business was founded by my grandfather in 1976, we had specialized in old air cooled Volkswagens. As the years went on, we have evolved into all types of vehicles - new and old, big and small. Since day one we have used... read more Automotive - General RepairJorge CallesTechnician at Starkey Service CenterDallas, TexasStarkeys is an independent shop I work for for few years now. It's a transition from Army to civilian life. It is a small shop and it makes it more of a family type environment. My moto is if you fail, we all fail. That incl... read more Automotive - DealershipDevon KennedysmithFCA level 2 technician at Herb Chambers Dodge Chrysler JeepSpencer, MassachusettsI grew up around cars most of my life, my journey started when my step dad began teaching me the basics at a young age, I was 5 years old when he would have me help him around the garage. He owned a family shop and towing co... read more Automotive - Specialty ShopKody HoughTechnician at Integrity Auto RepairDewey, OklahomaI went to OSU IT in Oklahoma and took the Ford Asset Program. I worked for a Ford dealership for 3 years then moved on to integrity with the shop foreman of the dealership. We both helped each other start Integrity and built... read more Aviation/AerospaceDerek WehrmanMilitary Defense Technician at BoeingHarrisville, UtahI grew up around hot rods and manual labor, my dad was all about doing it himself. He raised me that way too. He had a few custom classic resto shops throughout my childhood where I would "work" almost everyday with him. By ... read more Fleet MaintenanceTimothy MoroneyDiesel Truck Mechanic at Casella Waste SystemsNorthbridge, MassachusettsI became a diesel mechanic because my dad was one ever since he graduated high school and my dad was always my hero! When I was a kid, I loved going to work with him to play around with the "big trucks" so naturally it was j... read more DesignSiara BerryDesigner/Artist at Design FugitivesMilwaukee, WisconsinWorking on the Snap-on 100th Anniversary socket sculpture was so fun - it was so cool seeing the variety of sockets create an image. Using parts in a unique, artful way is always rewarding. We look forward to creating the 20... read more Fleet MaintenanceSarah ListerAuto Technician at Dave’s Mobile Auto RepairChico, CaliforniaMy name is Sarah Lister, I am an automotive technician and co-operator of an Automotive Repair & Fleet Service shop. I have worked alongside my father over the last few years and have learned so much. I have always had a gen... read more Fleet MaintenanceCraig LambrechtFleet Administrator at Village of Gurnee Fleet ServicesGurnee, IllinoisMy name is Craig Lambrecht and I am the Fleet Administrator for the Village of Gurnee, IL. I started turning wrenches in the 80's working on cars and racing dirt stock cars out of high school. After graduating from automotiv... read more Fleet MaintenancePat LucasMechanic at Village of GurneeGurnee, IllinoisAs far as "cool projects" nothing really is cool anymore since I have been doing this for so long! Funny things have happened since I have seen a lot, but one still makes me laugh. It was when I was working on a transmission... read more Public WorksJerry PetersonMechanic at Village of GurneeGurnee, IllinoisI used to work at Cadillac as a mechanic, then I got a job at Public Works. Now, I work on everything from chainsaws to excavators and fabricating trailers and plow trucks to our needs!
Fleet MaintenanceJason MayMechanic at Village of GurneeIsland Lake, IllinoisWhen I was younger I spent all my time working on hot rods and 4x4s. Now, I spend all my free time working on baseball and softball tractors.
ManufacturingMark VickPress operator at ManhassetYakima, WashingtonI'm just a low budget guy who built a 76 280z cancer awareness racecar for Bonneville. It's a cancer awareness car that I put names of survivors and family members who have passed. I'm on Facebook - courageous racing. Its a ... read more Automotive - General RepairJosh WhitemanSmog Repair & Diag Tech at George's ShellFontana, CaliforniaI graduated high school then went to college for four years for business administration and hated it. I decided to work in the family business as an auto technician and started doing oil changes and cleaning parts. I gained ... read more Automotive - General RepairIsrael GarciaMechanic at Superior RacingStaten Island, New YorkThey always told me I can't be a mechanic because they wanted me to do the same job as my father, but I love getting dirty working on something that I love, learning something new every day and having the best experience wor... read more Automotive - DealershipSteve Haus Jr.Automotive Technician at Ford DealershipPhiladelphia, PennsylvaniaI have been in the automotive industry since I was a kid, working with my dad as an autobody technician. As I got older, I started trying other careers like working as a Philadelphia correctional officer and as a federal pol... read more Agriculture Equipment RepairNathaniel AshtonSmall Engine Technician at Causeway MowersMelbourne, FloridaWhen I graduated high school, I went to a college near my home. Over the next 4 years I got my degree and built my life around the college. Eventually, they offered me a job and I accepted. Then a year later, Covid-19 hit. T... read more RacingTom BielaszkaBike MechanicBoise, IdahoI started wrenching later; sometime in the late 1980's. I have always been mechanically inclined. I guess I just grew up around my dad and my brother who were very mechanical.
I started by just working on my own bicycles. I ... read more Automotive - Specialty ShopBrad and Danielle ApicellaShop Owners at Apicella DesignsPhoenix, ArizonaAround 2014, I had a business partner who took me under his wing, and we decided to build hot rods although it was a soft market for those at that time. We started Apicella Designs after working on this 1950 truck that I com... read more Auto and motorcycle shopDavid DamronOwner at Renegade’s GarageJacksonville, FloridaIt started a long time ago in the late 70’s fixing bicycles for everyone in my neighborhood. Then I started riding and working on dirt bikes. My dad wouldn’t buy me a running dirt bike, so he would give me one and say if you... read more Aviation/AerospaceMatthew BoerwinkleMechanic at US ArmyRiverton, IllinoisThis picture was taken of me working on a Blackhawk helicopter jet engine at an airbase in Iraq in the middle of the night. We were told to use minimal light, so I used a mini mag-light held between my teeth. This made for s... read more RacingDan FariaPro Speedway Racer at Fast Fridays SpeedwayCitrus Heights, CaliforniaI have been racing at Motorcycle Speedway for the last 14 years. I am in a pro class that races up and down California during the summer. I race Speedway motorcycles and I am in front of thousands of fans all the time, which... read more Heavy Duty Truck RepairKane BrayDiesel Technician at General Truck SalesEaton, IndianaAt a young age I was fascinated by anything with wheels. I grew up having a dad that was also a diesel technician and whose hobby was classic cars. I got my first pick up truck at 14 by trading a go-kart and I still have the... read more Construction Equipment RepairCj ShoemakeShop Mechanic at Ahern Equipment RentalsDeQuincy, LouisianaAlways said I would never buy Snap-on, but now that is the ONLY thing I'll buy!! The coolest project to me was when I rebuilt a crane truck from the ground up. A buddy at work trying to run in from a down pour and sliding 5 ... read more Automotive - DealershipSteven LeeLine Technician at North Ft Lauderdale SubaruCoconut Creek, FloridaI started in the auto industry using Snap-on tools in the Toyota T-TEN program. Moved onto a Toyota dealership for 5 years. Worked for a Toyota fork lift dealer for 1 year and now I'm onto a Subaru dealer. After trying many ... read more Fleet MaintenanceMatthew CuddDiesel Mechanic at YRC FREIGHTGastonia, North CarolinaI’m one of three brothers that currently work for YRC in Charlotte, NC. I love building and repairing things with my hands. I have worked in this industry for over 20 years and find it very fulfilling. My oldest brother work... read more Military & DefenseRandall ShufordSafety Management at AecomPhiladelphia, PennsylvaniaSince I’ve been working in construction for 39 years, I’ve had to go to various places to work. I am now a Safety Professional for the last 12 years because I got injured while working. I love the work! I also previously wor... read more Automotive - DealershipPat AlexanderTechnician at Cochran Mazda MonroevillePittsburgh, PennsylvaniaI have been an auto technician since 2011, a Mazda technician since 2016. I never knew my job could also become a partial hobby! Buying tools feels just like any other collecting hobby to me. Plus I get to use them to work o... read more Automotive - DealershipChase CartwrightTechnician at Mercedes Benz of Thousand OaksPort Hueneme, CaliforniaI joined the Navy as a mechanic in 2016, tested into the Mercedes program and now work as a diesel technician at my local Mercedes Benz! Removing and replacing engines is always the coolest at work! Blowing up the oil sucker... read more RacingTrinity UttechRacecar DriverNew Berlin, WisconsinI am a 17 year old high school student who races sprint cars. I have been racing go karts for 11 years and started racing sprint cars this year. I also play soccer and trap shoot. I enjoy racing and am the third generation b... read more Former automotive techHubert PellegriniHobbyist at HomeStanfordville, New YorkI started out as an aviation mechanic at age 17. Almost half a century later and having raced through a career as an automotive technician, I now enjoy building project cars out of my home. The coolest project I have worked ... read more Automotive - Specialty ShopGerald MurphyFabricator at American Legends Hot Rods and Muscle CarsPhoenix, ArizonaI was really into BMX bikes and wanted to learn how to build my own frames. I learned how to weld, got my permit and got into cars. I was a good welder and a good mechanic, so I went to my local body shop that did restoratio... read more Automotive - Specialty ShopCharlie SullensPartner/Technician at American Legends Hot Rods and Muscle CarsPhoenix, ArizonaI started working on family cars when I was 13 years old. I would race in the desert and had to learn how to fix it up myself as we couldn’t afford someone else to do it. I jumped around different jobs and then decided to g... read more Automotive - Specialty ShopGlen ButlerFabricator/Technician at American Legends Hot Rods and Muscle CarsPhoenix, ArizonaMy dad and uncle each had a wrecking yard and I pretty much was raised in them. I tried to go into other jobs but always ended up back working on cars. I used to work for Arizona Street Rods- I built a hot rod for one of my ... read more Heavy Duty Truck RepairJake ShainlineEVTSterling, VirginiaMy name is Jake and I am an EVT or Emergency Vehicle Technician. I work on anything as I am also a domestic travel technician along the east coast for my company. My main focus is on complete bumper to bumper maintenance, re... read more Automotive - Specialty ShopTony ArmeShop Owner at American Legends Hot Rods and Muscle CarsPhoenix, ArizonaI started working with my dad and we built my first car - a Mustang. I ended up selling it and bought another one that I drove throughout high school and then it snowballed from there. I went to a community college to study ... read more Heavy Duty Truck RepairAnthony SilvaLead CNG TechnicianPhelan, CaliforniaI have 17 years of experience in Heavy Duty Diesel repair and 12 years experience with LNG and CNG. Currently, I am at the nation's largest Volvo and Mack dealer taking care of Southern California’s CNG powered Amazon units ... read more Automotive - Specialty ShopJacob CoenOwner at Spec GermanGig Harbor, WashingtonJacob grew up in Gig Harbor, Washington and graduated at Peninsula High School in 1998. He attended Universal Technical Institute in Phoenix, AZ from 1998-1999. He received his Associates Degree in Science and Technology. D... read more ManufacturingRay PaganiCNC Operator at Sturtevant RichmontCarol Stream, IllinoisI graduated high school and got my Associate's Degree, then started as a gear manufacturer. After that job, I moved onto working on sharpening tools and lathes before I started here two years ago. I love it here, there is ne... read more ManufacturingAlfredo SierraMachinist at Sturtevant RichmontCarol Stream, IllinoisI started 23 years ago here. My father-in-law got me the job and trained me! Before coming to Sturtevant Richmont, I was a delivery man for the Cannonball in Chicago. I needed a job, I had family responsibilities, so I came ... read more ManufacturingCarmen OlmoPackaging at Sturtevant RichmontCarol Stream, IllinoisI started at Sturtevant Richmont 24 years ago and my father worked here for 33 years! This job helped my kids grow up and helped me provide for them. I have grown a lot and learned a lot of new things here. I upgraded the pa... read more ManufacturingJuan BenavidesCalibration at Sturtevant RichmontCarol Stream, IllinoisI started six years ago here and came from a food service job. I started out in mechanical and have since moved to where I am now in calibration. I got here and knew I was going to like it and that it was always going to kee... read more Automotive - General RepairGeno UnserAutomotive TechnicianCorinth, New YorkI started helping my dad work on cars when I was 7 and then started working on my own until I got in to the automotive repair industry about 7 years ago. Rebuilding the carb for my '84 Camaro z28 is my coolest project becaus... read more Aviation/AerospaceKyle KoserAviation MechanicWichita, KansasAfter working in the automotive industry as a BMW Master Technician for 13 years, I wanted a change of pace and to learn something new. I started working at a small aircraft repair/modification facility. Currently, I'm worki... read more Aviation/AerospaceRoger VargasAircraft Technician/ Journeyman Mechanic at KDA Santa Monica Airport/ UPSLawndale, CaliforniaI am an A&P Technician/Journeyman Mechanic. I’ve worked in the general aviation business and currently work as a Journeyman Mechanic for a major delivery service fleet. Coolest project I’ve worked on was when I performed an ... read more ManufacturingTerrance McLamField Service EngineerFountain Inn, South CarolinaI've been in mechanical fields most of my life and came from a long line of blue collar workers. I started out wrenching on bicycles and then went to MMI Orlando. From there I worked on Harleys, moved into manufacturing for ... read more Automotive - DealershipAndre McDonaldAutomotive Technician at Phillip's Buick GMCEustis, FloridaI am a young General Motors certified technician. I started working in the car dealership service department when I was 19. I went to the GM ASEP program where I learned my trade and started my Snap-on tool collection throug... read more ManufacturingApril HughesAssembly Production Line at Snap-onMurphy, North Carolina
MotorcycleMario SanchezShop Foreman at Las Vegas DucatiLas Vegas, NevadaMy name is Mario Sanchez, I have been a Motorcycle Mechanic for 20 years now. I started out taking courses at MMI in Florida. I came back to California, not really having all the information or training I needed. I started o... read more Small Engine Repair/ConstructionCory Hoyle-Harris4 Cycle Technician at Knabe Outdoor PowerChesterfield, VirginiaI started getting into small engines in high school. Progressed over the years at this local small business and now I’m basically the go-to for small engine questions from all my buddies. My job is definitely a rare one bein... read more Automotive - General RepairPatrick LeesAutomotive Technician at 21st Century AutoBrowns Mills, New JerseyI am the fourth generation of automotive technicians in my family and I basically grew up in the shop with my dad and my grandfather. I have been working in the family business for six years now, and every day I look forward... read more Private IndividualGary UnverzagtPrivate IndividualEllicott City, MarylandI was a career firefighter for 31 years and have been a volunteer firefighter for over 52 years. I also owned a landscaping company for 33 years. After retiring, I wanted to restore cars/trucks. This is a desire I had for a ... read more Heavy Duty Truck RepairCaleb TuckerDiesel Technician at The Pete Store Greenville SC Inman, South CarolinaMy dad was hit on his motorcycle while I was in 10th grade. I had to drop out and take care of him through all of his surgeries. I knew I wouldn’t ever get back into school, so I decided to take up a trade. I always loved ta... read more Automotive - DealershipMarc BergeronTechnician at DriveTimeHenderson, NevadaI have been in the Automotive Repair industry since 1994, and have not held a job anywhere other than dealerships or independent repair shops. Now, I'm working in a used car dealership and working for myself after hours from... read more Technical Education - students and instructorsClayton RenthAssistant Professor/Owner/Technician at Lewis & Clark Community College/Fathead Garage LLCAviston, IL, IllinoisI graduated from Southern Illinois University - Carbondale in 2009 with a Bachelors Degree in Automotive Technology. I was a Service Advisor at Jansen Chevrolet in Germantown, IL for almost 5 years before becoming an Automot... read more ManufacturingDaniel RamosHeat Treat Machine Operator at Snap-onMilwaukee, Wisconsin
Automotive - Specialty ShopJason BurkittProduction Director at Dahmer Powertrain IncHarrisonville, MissouriI started off at about 17 in the automotive industry and have been moving up and learning daily ever since. I worked on cars previously since I was about 4 in the shop with my father, uncle and grandfather. We never took any... read more Automotive, ATV and MZX, Motorcycle Repair and Custom BuildsEric PlattSelf Employed/Owner at EZ RacingVineland, New JerseyI am submitting this on behalf of a very good friend of mine. I’ve known Eric for about 7 years and I’ve seen him work in the union, in which he was apart of for just shy of 20 years. Within the past 3-4 years, he has left t... read more Automotive - DealershipJustin MosseyMechanic / Technician Swanton, VermontI grew up learning to fix my cars when I broke them on my own. I learned from my mistakes and did not do them again. I couldn’t afford to go to college and started a career in the auto industry as a reconditioning job for 4 ... read more Heavy Duty Truck RepairTroy ShoemakerRegional Parts AdministratorSmithville, Missouri, USI have been around oil and grease my whole life. Growing up on a small cattle farm I was around small engines, automobiles and tractors/equipment and I was always there to help when something needed fixed. I took that and go... read more ManufacturingMauricio GonzalezMillwright Apprentice at Anheuser-BuschCartersville, GeorgiaAfter recently transitioning out of Active Duty Army as a Wheeled Vehicle Mechanic maintaining the fleet of HMMWV’s/FMTV’s, I was presented the opportunity to switch lanes in a Union Millwright apprenticeship. The technical ... read more Automotive - DealershipBlaine KunimuraMazda Master Technician at Cutter Mazda of WaipahuPearl City, HawaiiMy dad was always the biggest influence on me. He fixed his muscle cars as a hobby, those years of helping him rubbed off on me, anything with an engine fascinated me. I took high school auto shop and attended Universal Tech... read more Concrete resurfacingMichael JansenService Technician at Jon Don Zephyrhills, FloridaI’m a Service Technician with Jon Don. I have been turning wrenches for 25 years. I got my start as a boat mechanic while I was in the Marine Corps. This carried me through several trades over the years. Today I’m working on... read more Automotive - General RepairRyan MillerLead TechnicianCave Creek, ArizonaAt 19 I started working at Discount Tire Company and worked there for about 9 years. I decided that I wanted to get into a shop that did more than just tires so I got a job at an independent shop where I have been working no... read more Automotive - General RepairLuke ThimmeschTire/Oil Changer & Welder at All American AutomotiveColwich, KansasI am 16 years old and I work at All American Automotive. I started working there when I was 14, doing maintenance work (cleaning, organizing, etc.) and helping my dad work on vehicles. My dad is the shop manager there and I ... read more OtherVictor FMaker Yardley, PennsylvaniaI do a little bit of everything. I love fixing and making things. I started taking stuff apart when I was 3. Took apart anything I could get my hands on with a screw driver just to figure out how it works. I started designin... read more Aviation/AerospaceCorey TremblayHardware Technician 2Jacksonville, FloridaIn February of 2015 I decided to take a giant step into something brand new. I stepped into the world of aviation. I was hired on at my company as a tech helper, and began working alongside very talented and knowledgeable te... read more Automotive - Specialty ShopNick ReynaMechanic/Technician at BuslabBerkeley, CaliforniaHey what's up. Just wanted to drop my story. I've always been a tinkerer from having a saltwater fish tank to taking things apart to just plain messing with everything. I've always wrenched on my cars doing light tune-ups an... read more ManufacturingPake BenthinMachinist/ Technician at Warn AutomotiveBeavercreek, OregonDuring the day I am a machinist at Warn Automotive as a tier 1 and 2 supplier. We manufacture drivetrain components for many OEM manufacturers such as Ford, FCA, Kia and many more. At night I work for myself as a technician ... read more Heavy Duty Truck RepairEthan KelleyDiesel TechnicianHouma, LouisianaGrowing up I've always had a passion for fixing things that were broken and learning how they worked. It was only natural that I ended up pursuing a career in the diesel industry. I went to Votech at Terrebonne Career and Te... read more Automotive - General RepairWeston NugentMechanic at Matt's GarageGreeley, PennsylvaniaI am a junior mechanic who works part time at my dad's automotive shop. I really enjoy working on vehicles and small motors. I fix small motors on our farm as well. I hope I can continue to be a mechanic for a long time. I r... read more Automotive - Specialty ShopGreg Perz JrTechnician at Vengeance RacingAlpharetta, GeorgiaI started out as a child. My father worked in the industry and I was always going to work with him and helping on things around the house. We went on to work together for almost 10 years before I broke off into Motorsports. ... read more Automotive - DealershipNicholas WrageDiagnostic and Repair Technician at Wesley Chapel HondaWesley Chapel, FloridaI started working on cars my freshman year of high school, when I joined my technical schools automotive service program. My senior year of high school, I became a flat rate technician for Nissan, and completed their certifi... read more Technical Education - students and instructorsKyle SnoverAutomotive Instructor at Tunkhannock Area High SchoolTunkhannock, PennsylvaniaHad a high school automotive technology teacher by the name of Jimmy Switzer who showed me how valuable a technician's thought process is. That process has led me through 6 years as a dealership technician and now 10 years o... read more Agriculture Equipment RepairRobert WatersOwner at W and F Small EnginesOmaha, IllinoisI grew up in a mechanic shop as my father owned one when I was a teenager. In my 30s, I started my own shop and have grew that to a successful and stable income. The coolest thing I have worked on is probably the CNC plasma ... read more Automotive - DealershipDustin FowlerAuto Technician at Harry Blackwell ChevroletDexter, MissouriI’ve been a mechanic for about 10 years. I started working on my truck, family and friends' cars doing oil changes and tire rotations. Once I built some knowledge, I started installing stereo systems, light bars, upgrading t... read more Automotive - Specialty ShopTimothy PetersCar Chief at JD MotorsportsGaffney, South CarolinaWorking as a car chief for NASCAR Xfinity series has always been a dream of mine and going to UNOH has helped me progress my dream and make it a reality. A 69 Camaro for the owner of the team, Johnny Davis was my coolest pro... read more ManufacturingGuillermina ValdezCNC Machinist at Snap-onCity of Industry, CaliforniaIt feels good to start with a piece of metal and make something that you can say ‘I made that.’
Heavy Duty Truck RepairChristopher BurgoLead/Head/Foreman Mechanic at Town of Tiverton DPWTiverton, Rhode IslandI work for the DPW in the town I live in. I am actually the only mechanic in the shop in which I run. I order all the parts, I do all the repairs, I run to the parts that can not be delivered, I plow during the winter months... read more Automotive - DealershipMiao YuMechanicMonterey Park, CaliforniaI was a mechanical engineer just tired of sitting in front of the computer, I decided to move to a hand on to an auto mechanic job. Working at an auto dealership, found it more exciting for me to do a hands-on job. I once ma... read more Automotive - General RepairDerek ArnoldMaster Auto TechnicianBloomfield Hills, MichiganI went to school to become a heavy truck technician but ended up working in an auto repair shop. Along the way, I bought a school bus to convert into a tiny home/RV. During the conversion I had to replace the engine in my dr... read more Automotive - DealershipZachary AubinAutomotive TechnicianSalt Lake City, UtahMy name is Zach Aubin. I grew up in California with three brothers and my parents. We live in a yurt in the Santa Cruz mountains completely off the grid. We get power from batteries and a generator, and we get water from a n... read more ManufacturingBrad TylerService TechnicianNewport, OregonI'm a retired Navy Chief that went from working on nuclear warships to working on CNC machines in the Pacific Northwest. I get to work on machines that build airplane parts, firearms, and knives to machines that make replace... read more Automotive - General RepairBen RussellTechnicianEl Cajon, CaliforniaI am a technician at a tire/alignment shop in the San Diego, CA area. I have been working in the automotive industry for the last 20 years. I have a passion for automobiles and particularly BMWs. I love the gratification ass... read more Automotive - Specialty ShopJames PizziAutomotive Technician at Cruisin GoldPalm bay, FloridaI've been an automotive tech for almost 20 years. Spent more money on tools than I can remember! Still buying them though. I don’t know of any other job I would want to do. I work on all makes and models and diesels. Twin tu... read more Agriculture Equipment RepairDusten GregoryMechanic at Nates Lawn ShopFlint, MichiganI have worked on small engines and motorsports all my life in my family's shop in Flushing, MI. Working on a food trailer on the infield of Michigan International Speedway was definitely my coolest project. Loved just being ... read more Heavy Duty Truck RepairJames HarmonShop ForemanMount Airy, North CarolinaI love working in the shop with the opportunity to grow in a company and with the opportunity to maintain my own projects. I rebuilt the motor in my 1995 Mitsubishi Montero -got to know my engine and figure out how everythin... read more Forklift RepairBernard LangField Service TechnicianAlbertville, MinnesotaI've always loved cars, trucks, motorcycles.. anything with an engine. Started my career after graduating from Universal Technical Institute. I worked all over in the Automotive industry for 7 years. Then transitioned to the... read more Construction Equipment RepairMakary ZukoffEquipment Mechanic at United RentalsNew haven, ConnecticutMy passion for heavy equipment started at a young age with die cast models. Over the years I’ve slowly learned how they work and more importantly how to fix them. My passion hasn’t decreased from working in the harshest cold... read more Automotive - General RepairJonathan LlinasAuto TechMemphis, TennesseeI have only been in the field for about 4 years now, but I can already say with 100% certainty that this is what I want to do for the rest of my life. Started at the bottom as a lube tech with no prior experience and no tech... read more Military & DefenseAaron WillsMachinery Technician at US Coast GuardBrightwood, OregonI’ve been in the Coast Guard for just over 10 years now and have worked on a little bit of everything from HVAC systems, and reverse osmosis systems to small outboards and large diesels. I also started my own side gig recent... read more Heavy Duty Truck RepairJustin MaultzWelder/Fabrication at Bellmawr Truck Repair Berlin, New JerseyMy name is Justin and I’m a welder / fabricator at Bellmawr Truck Repair, I'm new to the welding trade. I’ve picked up very fast I’ve been told. We specialize in trash and dump truck body replacement and hydraulic repair, wh... read more Heavy Duty Truck RepairNick BroylesDiesel Tech at PenskeCalhoun, GeorgiaI’m Nick, I'm 21 years old and I’m a diesel tech. I have always loved cars, my dad was an automotive mechanic and I took the same route. I just got lucky and got into diesels. I’m learning everyday and gas will always have m... read more Construction Equipment RepairAndy GilmerLaborerAthens, GeorgiaI’m a 19 year old laborer. I started working at a repair shop for heavy equipment in 2018. I was working before I had my actual license. I was going through high school at this time and working for the company (CBP) has been... read more Automotive - DealershipHans GartnerFlat-Rate Technician at Mercedes-BenzGresham, OregonI started with Benz at the beginning of 2019 as an entry level Tire Technician, quickly working my way up to Express Lead under the flat-rate pay system. I have always wrenched on my own vehicles, but it’s an amazing feeling... read more Technical Education - students and instructorsTed BielitzAutomotive Instructor at UTI-Bloomfield CampusClifton, New JerseyMy automotive experience goes back when I was 9 working at my buddy's father's auto shop. We would pass by it on the way home from school and always stop in. We would clean up or do minor things under his supervision. Years ... read more Heavy Duty Truck RepairStan CatherDiesel MechanicTheodore, AlabamaI started learning about cars when I was old enough to hold the light for my dad. I have spent the last ten years working on heavy equipment and trucks. I once got the opportunity to help build a 200 ton wrecker truck. I was... read more Aviation/AerospaceDaniel EngelhardtDOM at AWE Aviation LLCFt Lauderdale, FloridaI started an Aircraft Maintenance Shop after seeing what not to do and what tools not to use in other shops I worked in and decided to do it right every time all the time in my own shop. Honest pricing and absolutely no shor... read more ManufacturingBridgett HaigesSet Assembler at Snap-onCrystal Lake, IllinoisI was part of the ‘Great Place to Work’ team. I’m all about giving back. I’m a morale booster. Our team is like family, and that’s important to me. If you don’t like the people you work with, you’re not going to want to be h... read more MarinePaul SchimelEngineer, PEAlgonquin, IllinoisMy approach is different. I’ve been an engineer for three decades (formally). From birth as a matter of causality. I'm a licensed professional engineer in several states. I was welding when I was 10, running a Bridgeport whe... read more Oil & GasJared CondeCoil Tubing Hydraulic Technician at Stealth Completion ServicesOdessa, TexasI've spent 10 years as a Coil Tubing Hydraulic Equipment Specialist. I specialize in the repair, manufacturing, refurbishing, buying and selling of coil tubing machinery. One of the coolest projects I worked on was when I pu... read more ManufacturingPaul BusseTool and Die Maker at Snap-onCity of Industry, CaliforniaI make the best swaging dies in North America; if my granddaughter is on a plane that one is used on, I want to know that it’s right. I think about the people that are affected by the products that I build.
ManufacturingMaria PinedaOrder Processing at Snap-onCrystal Lake, IllinoisI wanted to do more and grow more. I already learned how to drive the trucks. Next I wanted to teach others what I learned. I became a trainer and now I train almost all the people here at Snap-on how to drive the trucks.
Valves for oil rigsDixie HuntValve TechnicianLiberal, KansasI have been working at a valve shop for almost 3 years. I clean, take apart, and put back together valves that companies need for oil rigs, oil pumps, pumps and other things.
Heavy Duty Truck RepairChristian ZapataDiesel Technician at Penske Truck and LeasingDuluth, GeorgiaGrowing up, I didn’t know much about cars so I would go to the shop for any repairs until the day I was tired of the mechanics turning me down. I decided to go to a trade school called UTI in Mooresville, NC. While going to ... read more Heavy Duty Truck RepairKameron MyersDiesel Technician at JX PeterbiltSun Prairie, WisconsinFour years ago I was homeless, and decided to change my life for the better. I went back to school at the age of 21 for heavy diesel repair and my life has turned around 100 fold. I slowly started buying tools and building m... read more Heavy Duty Truck RepairJavad SatariDiesel Tech at JX PeterbiltSouth Milwaukee, WisconsinI was born and raised in Wisconsin and have spent 22 years in the trucking industry and 10 years as a mechanic. I'm goal driven for the future and focused on success. I always strive for the best results in my work! I consid... read more Automotive - General RepairFulton SmithMobile Mechanic at Mike's Mobile MechanicDouglasville, GeorgiaIn 1985, I bought a 1970 GTO out of the junkyard. This was my first hot rod car I worked on and brought back to life. The craziest thing that happened on the job was when I got an emergency call to a customer's house on a ch... read more ManufacturingEdward GomezPrimary Manufacturing Cell Operator A at Sturtevant RichmontCarol Stream, Illinois
ManufacturingMario MelgozaWelder at Sturtevant RichmontCarol Stream, Illinois
Automotive - DealershipJeremy KarlinskiJourneyman Technician at Valley HondaYorkville, IllinoisI started turning wrenches at 16 when I bought my first car. I had no idea what I was doing, but luckily my grandfather was there to guide me as best he could. I was lucky enough to attend a trade school locally and am now a... read more ManufacturingReggie StarnesWelder at Snap-onLouisville, KentuckyI don't like rework. So if I can do it right the first time, that's a good thing.
ManufacturingVictoria VlchekElectronics Assembler at Sturtevant RichmontCarol Stream, Illinois
StudentLandon WhitfordStudentKenosha, WisconsinI'm a 6th grade student at KTEC west in Kenosha, WI, home of Snap-on! We are fortunate to have a lot of support at our school from Snap-on. My dad is the Quality Manager at the Snap-on Milwaukee plant and we enjoy using tool... read more Heavy Duty Truck RepairHalen MinorFleet mechanicLas Vegas, NevadaI came from a small town just tinkering with mechanics. I started in the workforce as a body piercer and mechanic on the side. I have then dropped the piercing and worked on learning more about mechanics and now I am a union... read more ManufacturingSuwit KhongmuangPliers Machine Operator at Snap-onMilwaukee, WisconsinYou wanna learn something cool? Go for it. Do not stop. You broke something? Go fix it. You have to break something before you learn.
ManufacturingChuck GreenwaldGrinder/Surfacer on the Production Line at Snap-onMurphy, North CarolinaI used Snap-on tools as a mechanic, and I’m proud to be a part of making the tools!
Motorcycle/powersports repair and dealerDavid SnyderMotorcycle Technician at Rollin FastNew Hope, PennsylvaniaI am a 27 year old male who has been in the motorcycle / powersports field for 3 years after 9 months of tech school in Daytona, FL. I love my job and I love fixing things in general. I'm an avid motorcycle rider and have be... read more ManufacturingShane KelleyMaintenance Mechanic at HC MuddoxCarmichael, CaliforniaI currently work as a maintenance mechanic for a brick manufacturer in Sacramento California. I started as a kiln operator, and was promoted to the maintenance shop 3 years ago. I work on heavy machinery and heavy equipment,... read more Automotive - General RepairGabriela RiveraMechanic at Toxic PerformanceRio Grande, Puerto RicoI’m a 22 year old girl who just finished an Associate’s Degree in Technical Mechanics, and I’m starting my own automotive repair shop called Toxic Performance with the help of my partner. We’ve been working at home, repairin... read more Automotive - DealershipJohn PizzoAutomotive Fluid and Tire TechnicianSaint Johns, MichiganEver since I was a little boy I was taking random stuff apart and putting it back together. My ex cars where disassembled every day after I played with them. My dad and I had always been going to car shows and one year we we... read more ManufacturingJerome GoddenQuality Control Technician at Snap-onAlgona, IowaWhat we're making here in Algona, Iowa is the best in the world. Best in the world and it’s made in America.
ManufacturingSteven MartinSTEM Academy EducatorNorth Scituate, Rhode IslandI have been a STEM Academy Educator for 19 years. I really enjoy teaching young adults the hands-on trades. Currently, I teach Manufacturing and Construction. I really respect the hard working Americans that earn a living wo... read more Automotive - DealershipMike Bar-NadavAutomotive Full Service TechnicianGarner, North CarolinaIt all started with my awesome Papa when I was about 10 years old. He had a 1964 Pearson 30 ft. cabin cruiser with twin inboard Ford 302 high performance marine engines and I fell in love with how they sounded and with helpi... read more ManufacturingCameron ZdroikMachinistWausau, WisconsinI started helping my dad at the shop since I could walk. I always had tools and was fascinated by what you could build if you could “dream it”. Legos turned into go-karts and eventually karts into cars. I noticed everything ... read more Automotive - General RepairAndrew JohnstonAuto TechCalhan, ColoradoI have always loved working on trucks growing up. I ended up joining the Army and serving 10 years. After getting out, I went to school to be a mechanic and have been working on cars for 2 years now. My personal truck is the... read more ManufacturingJake RothMachinist at Modern MachineWausau, WisconsinI’m 29 years old and a die hard Snap-on customer. I work at a machine shop making tooling for the earth drilling industry. I run two big bore Mazak Lathes. Developing a full line of sonic tooling was the coolest project I ha... read more Auto Body/Collision RepairSteve BoydJack Of All Trades at VI KustomsDallas, PennsylvaniaI came from a poor family, my mother was a single mother taking care of two young boys. I was fortunate enough to be able to get my AAS in Collision Repair at Thaddeus Stevens College of Technology, which is Pennsylvania’s t... read more Automotive - General RepairBlaine PlunkShop Owner & Operator at Family Automotive Repair and PerformanceBixby, OklahomaWe are a small town shop that turns out a lot of cars at an affordable cost. We are a 2 bay 1500sf shop, we work on average of 16-19 hours a day to stay caught up. We have built a reputation within three towns that no one el... read more Automotive - DealershipRico MckeeMaster Tech at Pomoco NissanQuinton, VirginiaI started at the dealer first thing after trade school and made a career as a master technician with 8 years of hard work and determination thanks to Snap-on tools. The coolest project I have worked on was a 9 second fwsd ca... read more Automotive - General RepairDavid KelleyTechnician at Express Oil ChangeDecatur, AlabamaI'm a single full time dad of 4 kids and they keep me pushing forward! I'm working on my Master ASE in automotive and I love my job! Snap-on keeps me doing the job with reliability and quality! I'm 30 years old and have been... read more Automotive - General RepairRyan ThompsonMechanic/Bodyman/Custom at North Central CollisionMountain view, ArkansasI'm a self-taught mechanic and trained body man. At my job, I work on everything from 48 DeSotos to 2018 Silverados. Despite no formal training in auto mechanics, I have never had to apply for a job as a mechanic, I get recr... read more Automotive - General RepairGerald SchuelerFront End Technician at Belle Tire Warren, MichiganI have been working with my company for 20 years now, straight from high school. It went from a hobby to a full-time passion. I've been in the car show scene for years and after meeting with some of the best in the industry,... read more Construction Equipment RepairTomas PortillaService/Manager at Jon DonMadeira Beach, FloridaI am a USMC veteran two-time Afghanistan campaign participant. I'm currently fixing equipment for restoration and concrete equipment. I am also working on restoring a 1969 Mach 1 and doing a 5.0 Coyote swap! One of the crazi... read more Commercial ServicesDave DesjardinsField Technician Oxford, MaineI do technical field service covering the entire state of Maine, specializing in small electronic type components. While I wouldn't "NEED" to use Snap-on tools, my dad is a 37 year Millwright in a paper mill and since I was ... read more ManufacturingRyan BeaverTool and Die Maker at Snap-onAlgona, IowaTool storage is the face of Snap-on. If you see a tool in someone’s hand, you don’t know it’s Snap-on. But if you see a Snap-on tool box you know we made it, and you know we made it right here in Algona, Iowa.
ManufacturingCharles McNealPliers Machine Operator at Snap-onMilwaukee, WisconsinI used to live in this area so I would always see Snap-on. Since I like cars, I would always see Snap-on tool boxes. I like the Snap-on name, I like the tools and I love coming to work every day.
ManufacturingJohn FergusonDrawer Cell Lead at Snap-onAlgona, IowaWhen you see the Snap-on box and Snap-on tools at a mechanic’s garage, you know they're going to do a good job because they have the best tools.
ManufacturingGerry CervantesAssembly Associate at Snap-onCity of Industry, CaliforniaWhen something isn’t right, everybody gets involved. Nobody says, ‘Just deal with it.’ It’s a partnership with the engineers, and they value the input of the people who make the tools.
ManufacturingMike HoskinsTool and Die Maintenance at Challenger LiftsLouisville, KentuckyI like when the fixtures I did comes together and everything's working.
AutomotiveKenny NormanSnap-on Tools FranchiseeAntioch, CaliforniaI started buying Snap-on Tools when I was 18 and haven't stopped yet! Even from a young age I always enjoyed taking things apart and putting them back together. Later on, cars and motorcycles became a passion, which in part ... read more Heavy Duty Truck RepairRoger ShieldsTruck Tech at Ohio CATColumbus, OhioWhen I was young I would always take things apart to see how they worked, or create my own projects. I started off taking auto shop, which then led me to going into the Army as a mechanic. After 40 years I'm still doing it. ... read more ManufacturingMarcus RippondAssembly Associate at Snap-onConway, Arkansas
Tool salesDarcy UnrauFranchiseeCanton, KansasI started at a young age working on cars with my dad. We worked on derby cars and hot rods. Then I decide to pursue auto mechanics so I headed to school and bought my first set of Snap-on Tools! I grew up on our local dealer... read more ManufacturingCassandra MeierForm & Weld Operator at Snap-onAlgona, IowaThe spot welder is an intimidating tool. It looks like a Terminator gun, but it can do amazing things.
Automotive - General RepairNick AngwinOwner at Aero Auto RepairSan Diego, California
Automotive - General RepairRay AguirreAutomotive Technician at Mercie J Auto CareChandler, ArizonaI am a fully certified ASE master technician working for an independent shop. I got introduced into this line of out of necessity, my father could not afford to take our cars to the shop in his younger years so I was his "he... read more Automotive - General RepairRandy BeginOwner at Mission Hills AutoSan Diego, CaliforniaI have been in this industry for 34 years. I have had the chance to work on a lot of classic cars.
Automotive - General RepairRandy MaustellerOwner/Technician at Mausteller’s Service CenterBloomsburg, PennsylvaniaWhen I was 12 years old, I bought a car for $25 and started working on it. Since then I have never quit working on cars. I have owned four different shops in Bloomsburg. The current shop has been in this location for 36 year... read more Automotive - General RepairBrian SalasTechnician at Aero Auto RepairSan Diego, CaliforniaI have been in the industry for 10 years. Working on diagnostics is my favorite part of the job, I love it.
ManufacturingKevin JonesCNC Operator at Snap-onElizabethton, TennesseeIt's a two-way street. The company cares about its employees, and we employees care about the company. I have two kids in college and I know my work is putting them through school.
Automotive - Specialty ShopJack DodyTechnician at Lakeside RadiatorSan Diego, CaliforniaI have 26 years of experience as a technician. I always like to keep my box perfectly organized and I put everything away every night.
Automotive - General RepairJoseph BznaukaMaster Technician at Aero Auto RepairSan Diego, CaliforniaI started working in this industry in the mid-70’s right out of high school. I learned on the job. I started at Randy Walls Racing and he mentored me. I have worked at dealerships for most of my career. I started at Datsun i... read more Automotive - General RepairMark BrentMaster Technician at Aero Auto RepairSan Diego, CaliforniaI am form San Diego, my great grandfather is from Virginia. He was in the navy and came to San Diego after WWI. I like the challenge of working in this industry. I work on a lot of older Datsuns – they are simple to work on.
Automotive - General RepairRonny MixonTechnician at Aero Auto RepairSan Diego, CaliforniaI have always liked cars. I used to work on my cars and my friends’ cars during high school. I then started going to community college and didn’t like it, so I trained to be a Certified SMOG Tech. Then I continued with ACA c... read more Automotive - General RepairAdrian OrozTechnician at Cass Street AutoSan Diego, CaliforniaIt all started as a hobby, then I went to tech school and started working half way through. I can do tires faster than most guys now. This is what we like to do for fun.
Automotive - General RepairAaron SchwarzmanApprentice Technician at Cass Street AutoSan Diego, CaliforniaI got into this line of work because my brother was a diesel tech and I looked up to him. I am working here to get my footing, then plan to go to college for Diesel Tech, then Lincoln Tech.
Automotive - General RepairCesar MagañaTechnician at Cass Street AutomotiveSan Diego, CaliforniaMy dad and grandpa are mechanics. I started at Midas and was there for eight years. I moved to Cass and have been there for seven years now. I am going to keep doing this, I love the job.
Automotive - General RepairJordan DeLozierShop Foreman/Technician at Mission Hills AutoSan Diego, CaliforniaOriginally I was a pin setter at a bowling alley, then I went to night school for automotive. I started at Dave’s Auto Truck as an oil changer, then was a junior tech for two years. The guy who taught me was good. I was a qu... read more Automotive - General RepairMatthew PerreavltTechnician at Mission Hills AutoSan Diego, CaliforniaI started out working on hot rods at home. I took two auto shop courses in high school, but my knowledge is a lot of self teaching and guidance from my shop foreman. Every day I love it, I am proud to come to work and open m... read more Automotive - General RepairPierre HosyApprentice Technician at Mission Hills AutoSan Diego, CaliforniaI am an engineering student, but I have family in southern California, so I’m living here for the summer. I have 3-4 more years of engineering school, including 18 months of co-op programs. I hope the co-op programs will hel... read more Automotive - DealershipJesse StreitService Tech at Marmie Auto Grouplarned, KansasMy father and his love for cars are what got me into this industry. I have been a gear head all my life since I was 6 or 7 working with dad restoring cars. Later on in 2012 I graduated as a NASCAR tech and I traveled being a... read more ManufacturingKevin PizzoAssembly Associate at Snap-onConway, Arkansas
Automotive - General RepairFernando AcevesAuto Tech at Superior Tire IncNational City, CaliforniaMy father owned an automotive shop so I've been a car junkie since I was little. I grew up my whole life going to work on cars after school and even during the summer. Now after graduating high school I do this for a living.... read more ManufacturingBrenda MarquezAssembly Associate at CDICity of Industry, California
Fleet MaintenanceAlexander Klaus-GillTrailer Technician at J.B. Hunt Transport, IncColumbia, PennsylvaniaI started out at a local haunted attraction, building anything from scenes to a whole functioning special effects building. There, I met a friend that helped me get into my current job through a training program as a semi-tr... read more Heavy Duty Truck RepairJonathan McewanTechnicianMannford, OklahomaI got started in this industry after the oilfield that I worked in slowed down and I couldn't provide for my family, so I decided to go back to school. I have been providing for my family since I went back to school, and I ... read more Aviation/AerospaceThomas HollenbergerBlackhawk Mechanic at US ArmyFt Wainwright, AlaskaI’m currently a Blackhawk mechanic/crew chief in the Army. Prior to joining the Army I worked in the automotive repair field for 14 years. I got into auto repair in 2002 at age 16 when a friend of my dad got me a job at a G... read more Automotive - General RepairNick BarnabeeApprentice/ Journeyman Gurnee, IllinoisI’m a 23 year old mechanic that works at an independent shop. We work on all makes and models, so we always have a variety of cars to work on! My first mechanical job was actually working as a seasonal roller coaster mechani... read more RailCeleste BrodieTrain Conductor / Diesel Mechanic at Union Pacific / BrodieselWinnemucca, NevadaHi my name is Celeste. I’m a train conductor for Union Pacific and I help my husband run his diesel shop, Brodiesel. I helped my dad fix cars when I was younger and it got me into this line of work. I went to school in Stock... read more Oil & GasEd WentlandMotor Man/Driller at Flatirons DrillingWindsor, ColoradoI am Eddie Wentland. I’ve been mechanically inclined my whole life from working on the farm as a kid. I started buying Snap-on tools to work on farm equipment, but when I was 19, I moved out to CO and got into the oil and ga... read more Aviation/AerospaceBrooklyn GuarnieriA&P Apprentice at Superior Flight SchoolCovington, GeorgiaHello! My name is Brooklyn but everyone calls me Cricket. I am a 19 year old aircraft maintenance apprentice. I was always interested in becoming a mechanic of sorts. I love working with my hands and building things. My sist... read more Heavy Duty Truck RepairZachary YostShop Foreman at Schueman Transfer IncAvoca, IowaI am 34 years old, with 7 kids. I grew up in a family of body and auto mechanics. I always had to work on my own stuff, but I never really wanted to be a mechanic. I was going to be an electrician, but only time would tell!!... read more Automotive - DealershipVictor BenfattoKia Master Technician at Kia Fort Walton Beach FLPensacola, FloridaI have been working on cars since I was 11 years old. I started learning from my step dad when we rebuilt the family van, 1977 Ford Chateau with the 351w. I spent many hours rebuilding that engine, even on summer vacation in... read more Automotive - Specialty ShopLonnie BryantLead Tech at Force CustomsRiverview, FloridaI got started in this field because I would always be taking apart and fixing my bikes as a kid and always helping my dad fix the family car, so I always knew I was going be in the auto industry. I have been in the automotiv... read more ManufacturingHogan HaeberMillwright at Roseburg Forest ProductsRoseburg, OregonMy name is Hogan, I’m 25 years old and love working with my hands! I’ve been in the industrial industry since I was 16 years old, but was working on the family farm since around age 12. I’ve always been good with my hands an... read more Heavy Duty Truck RepairElijah GangiHeavy Equipment MechanicHerington, KansasMy story is I enlisted in the military when I was younger and did my contract, got out and worked a few jobs, but decided I wanted to do my part and help support the military again. I do that by working on military equipment... read more ManufacturingGabriela GarciaAssembly Associate at CDICity of Industry, California
Power GenerationKevin BrownApprentice LinemanAltus, OklahomaHello, my name is Kevin Brown. I'm an Army veteran who is now an apprentice lineman. I love my job though it's tough. We work long hours in all seasons and all weather to keep the power on in our town. We work on lights, hig... read more Construction Equipment RepairJonathan SpearsDiesel Engine and Pump Technician at Xylem Dewatering SolutionsPalm Coast, FloridaI started turning wrenches as a lube technician at a Dodge dealership in Jacksonville but due to some unforeseen circumstances I had to relocate and it cost me my position there. So for the next 3 years I mainly worked in re... read more Automotive - DealershipBJ BarnesCraftsman at Nelson MazdaLaverne, TennesseeI started my journey in the automotive industry at the age of 16. I started sweeping the floors, changing oil and tires. A few years later I moved to a job at Tri Tech Automotive where I learned more and more. That is where ... read more ManufacturingAndrew JonesCNC Machining Line Assist at Hitachi AutomotiveLawrenceville, GeorgiaI’m in the automotive manufacturing industry for a company making steering racks with tolerances of sub 50 microns (.050mm) which is about the thickness of a sharpie mark on a metal surface. But I’m a mechanic on the side mo... read more Aviation/AerospaceTyler ThomasAircraft MechanicDepauw, IndianaFrom a young age I was drawn to anything with an engine. My dad would constantly buy project cars, fix and sell them. I would help and gained a lot of knowledge from him. He also exposed me to aircrafts as he had his pilot ... read more Agriculture Equipment RepairJared CastleLead Technician at Montrose Implement and MotorsportsMontrose, ColoradoI have been with Montrose Implement for 15 years working on Massey Ferguson tractors, balers and windrowers. I started out as a grunt and worked my way into lead technician. I have fixed everything from 1940s tractors to bra... read more Heavy Duty Truck RepairMichael KronerDiesel Technician at Kriete Truck Center RacineWest Allis, WisconsinI’ve been a diesel technician for almost 3 and a half years. Wouldn’t change it for the world. I love what a do every day. I help keep trucks on the road and the world moving. My dad has been a diesel technician all of his l... read more Automotive - General RepairNicholas BowlesAutomotive Technician at Knox Knolls AutoCareSpringfield, IllinoisI am a 3rd generation master technician. I got started in this field by helping my dad work on cars and trucks and by helping my grandpa keep the tractors, farm vehicles, and equipment going. I figured out that I had a real ... read more Automotive - DealershipShannon WoodTechnician at Marlow FordElkton, VirginiaI’m a general technician with a long line of diesel certifications and history behind me. I’m soon to be the master diesel tech here. My dad had his own shop for 30+ years. I always was fascinated with diesels. I bought my f... read more Automotive - General RepairJohn FoleyMechanic at Bob's Tire ShackBrockton, MassachusettsI have always worked on cars and trucks with my father from a young age, then I started working at a Ford dealer working my way up. I then made the switch to independent work. I have been Snap-on good for years and just last... read more ManufacturingCody StevensAssembly Associate at Snap-onConway, Arkansas
Heavy Duty Truck RepairSamuel BlackMechanic at Heath's DieselJacksonville, FloridaAfter I got out of the Army, I went to school and got my A.S in diesel engines. I then went off to get certified by Vovlo and Mack. I’m always happy working on a big truck. I have been doing this work for just over 3 years. ... read more Amusement RidesBrandon DevaultRide MechanicKernersville, North CarolinaEver since I was a child I had an interest in amusement rides. The mechanical aspect was my favorite part of the rides and I wanted to know more about how they work. I went to school for industrial systems technology and el... read more Automotive - DealershipMiguel UribeService Tech at Sierra ChevyLos Angeles, CaliforniaI started off in the back yard with pops holding the flashlight, and started moving up from there. I learned the names of all the basic tools, then started to use them. Cars were always a big part of my life. Now that I'm an... read more Construction Equipment RepairMax GriffeyShop Technician at Bobcat of DekalbSycamore, IllinoisI started working when I was 14 at various farms in my town doing oil changes and what not on tractors before harvest and tillage. Now at 17 I am working as a shop technician at a local Bobcat equipment dealer where I repair... read more Automotive - General RepairJose MunozMechanic at MidasAloha, OregonI had been doing work on my own cars for a while and thought why not do it for a living and I have been loving it ever since. I have been wrenching for a few years now, I first started at a dealership and now I'm with an ind... read more Vacuum sales and serviceLogan HulsVacuum Cleaner Repairman at Logan’s Vac ShopSibley, IowaAs a kid, I was always fascinated with vacuums. I would always put my mother’s vacuum away neatly and tidily (even though she wasn’t done). When I was about 7 or 8 years old, I got my very first vacuum, a dirt devil dynamite... read more Automotive - DealershipJamie MatthewsMaster TechnicianLimerick, PennsylvaniaI have been working on cars for most of my life. Growing up, I was in the garage a lot with my father, helping with what I can, mostly holding a flashlight, and learning what it takes to be a mechanic. I have now been workin... read more Automotive - DealershipAdrian HernandezVolkswagen Technician at Volkswagen of Corpus ChristiCorpus Christi, TexasI used to be a chef, it was my dream, my passion, and overall life goal. After 7 years in the Army reserve, I thought I wanted to still be a chef, but after trying to do it as a career, it just wasn’t for me. After a whole y... read more Automotive - General RepairBryan GomezAutomotive Technician at The Auto StationLakewood, ColoradoIt all started when I was about 10, I started helping my dad with simple repairs - spark plugs, oil changes, brakes, the basics! Ever since then, I fell in love with taking something that’s broken or not running and being ab... read more Auto Body/Collision RepairJoshua FahrenbruchCollision Repair Technician at Ozzie’s Body ShopLongmont, ColoradoI have been around the automotive repair industry my whole life. My dad was the fleet manager for The Boulder County Sheriff’s Department and was always interested in the repair process. Growing up I learned more of the mech... read more Automotive - DealershipJustin BeugTechnician at Woody FordTishomingo, OklahomaI started at Pep Boys, but now I work for Woody Ford as tech. I have been there for about 4 years now, and they have even sent me to Ford training in Dallas. I got to work on a 1967 Ford Gran Torino. I had to rebuild the fro... read more Auto Repair, Customize,Performance, Heavy-dutyDaniel MillerTechnician at Kost Tire & AutoScranton, PennsylvaniaI started working on Camaros and Mustangs in high school and fell in love with the work. I turned a hobby into a career, and became very good at it. I'm a Jeep specialist, ASE certified, and the lead tech at my job. I do ele... read more Automotive - DealershipThomas BryantTechnician at Estero Bay ChevroletLehigh Acres, FloridaI grew up around this industry because my dad was a tech, tow truck operator, equipment tech, body tech, and I'm sure there are more I left out. So, when he gave me my truck for my 16th birthday, it needed work - it didn't r... read more Automotive - Specialty ShopRyan MillerRJs ToolhouseBuffalo, New YorkI am a police officer by career, but started out working at my family's body shop for my first 5 or so working years, which began my love of all things tools and especially anything Snap-on. I now own a KRL Mr. Big Box that'... read more Automotive - DealershipAaron MartinezAutomotive Tech at Barber FordWest Olive, MichiganI started at a local dealer here in town and became good friends with the local Snap-on rep. I started with a Blue-Point starter set that I still have most of those tools today. I went to a mom and pop and was there for almo... read more Automotive - Specialty ShopDan MatthewsShop Foreman at Precision Diesel PerformanceKingston, MassachusettsI love the satisfaction of building a cool project or repairing something that nobody else has been able to figure out. While working at my current job, I also spend the weekends like many others doing small odd jobs for fri... read more Automotive - General RepairDomenic ValentinoFranchisee at Snap-on ToolsGlendora, CaliforniaI've always been into cars growing up and most of the cars I owned were muscle cars. When I got out of the U.S. Navy in the early 90s, I started working in the automotive industry stylizing cars and pin striping cars. My fat... read more Snap-on Franchisee AssistantWilliam ThompsonService Technician / Franchisee Assistant at RDD ToolsGrants Pass, OregonI grew up working on cars out of necessity. Helping keep the family vehicles running to avoid high cost repairs we just couldn’t afford. I went to a community college to become a diesel mechanic for large trucks and equipmen... read more Automotive - General RepairMatthew JonesAuto MechanicMillcreek, UtahTool addiction is real, I’ve been budgeting / investing in Snap-on tools for a couple years now. And something needs to be said about the feeling of satisfaction that comes from breezing through jobs one after the other. It ... read more Automotive - DealershipJake HoltTechnician at Woody Ford Motor CompanyTishomingo, OklahomaI’m 19 years old and I’m a full time technician at a Ford dealership working on being a master mechanic through Ford certificates. I started working at the dealership when I was 16 and in high school. I met the owner of the ... read more Automotive - General RepairJoshua HargetMechanicGrosse Ile, MichiganBecoming a mechanic was always a passion of mine. When I was young, I would always build models or buy hot wheels and modify them to my vision. I would build things out of LEGOs and create things with various items. As I gre... read more ManufacturingBryan Javier Rullán DíazIngeniería Creativa at Sun Boricua Pa’l Mundo Inc.Camuy, Puerto RicoI studied mechanical engineering at the University of Puerto Rico at Mayagüez and got really into building new mobility devices, getting in the shop, melting aluminum, and machining my way into my current job as an engineeri... read more Heavy Duty Truck RepairAlex RomeoMechanic at Compass Truck and TireChester, New YorkI've been working on cars for about 10 years now, although it's challenging work, to me, the problem solving is rewarding. I honestly can't imagine myself doing anything else, it's easy to take pride in this line of work. I ... read more Auto Body/Collision RepairFrederick AdolphMaster Tech at AstechTemple Terrace, FloridaI started working on trucks at my dads shop in the early '70s. I did basic shop chores and learned by watching and helping the senior mechanics there. I passed my Michigan State journeyman test in '79 and my first ASE master... read more Heavy Duty Truck RepairCraig McManusEmergency Vehicle Technician/Diesel MechanicSt. Stephens, AlabamaGetting to go to work everyday and work on fire trucks and ambulances is very rewarding. Knowing that I’m helping to keep the emergency vehicles in tip-top shape that serve the community that my family lives, works and shops... read more Automotive - DealershipJosh BennettLube Tech at Walterboro Motor SalesWalterboro, South CarolinaI love what I do for a living! When I started out, I literally had nothing but a few wrenches and a little Craftsman toolbox. I've always wanted a nice EPIQ box, but could never afford it! 10 years later my Snap-on salesman ... read more Automotive - General RepairBryant GlassAutomotive TechnicianAmericus, GeorgiaI started working on cars at a young age with my dad on our '43 Willys Army Jeep. From there, when I turned 16, I had to fix everything I broke on my first truck that I still own, a '99 2-door Tahoe. I learned a lot from wor... read more Automotive - General RepairJonathan ArnaoAuto Technician at Foreign Auto RepairBurlington, New JerseyWorking with my hands and physically/mentally challenging myself has been a big part of my life since childhood. I have grown up building and modifying before I knew it was going to be my career. From repairing and modifying... read more Automotive - DealershipZachary CaseresDiesel Technician at Lakewood FordOlympia, WashingtonI came from a small town in far Northern California called Crescent City. I participated in Ag Mechanics as part of FFA as well as attended auto shop class at my high school. I grew up working on cars and pickups with my dad... read more Automotive - Specialty ShopArt HopferAutomotive Electrician at Outside VanTigard, OregonI grew up on a farm with my dad being a mechanic. I was always tinkering on things to figure out how they work. During high school, I hung around at the local car auto shop way too much and ended up getting a job after gradu... read more Automotive - General RepairJonathan DonnellLead TechnicianCutler, IllinoisI have been in the automotive repair industry for 12 years now. I went to a 2-year community college and learned the basics of automotive repair. I always enjoyed helping my dad work on his car. But when I turned 16 I got a ... read more Electric MotorsJason ReedLead Mechanic at B & CFt. Worth, TexasI've been working as a mechanic for 14 years. I truly enjoy taking things apart and putting them back together. I started working in automotive repair due to my love for cars. A 1000 HP electric motor is the coolest project ... read more Automotive - General RepairCornelio CasasAutomotive Tech at Kearney GarageDenver, ColoradoI've been at it for 17 years now and I still very much enjoy working on cars. I've worked at dealerships for a long time, but I believe I grew more as a tech working at an independent garage. The constant variety and diagnos... read more Automotive - General RepairNathan CooperAutomotive Technician at Reliable Auto RepairDallas, PennsylvaniaI am a 23 year old automotive tech. I started working with my dad on cars at about 10 or 11 years old, my dad tells me I was always interested in mechanical things. Rebuilding an entire Jeep is the coolest project I have wor... read more Automotive - General RepairOlga MooreTool GirlAuburn, CaliforniaWhen I first met my boyfriend 6 years ago, I didn't know the difference between a flat and Philips screwdriver. Fast forward to now after countless rear end replacements, fuel pumps, water pumps, oil pans, brakes, engine dro... read more Automotive - General RepairJohn PerryMechanic at Town of WeymouthRockland, MassachusettsAt a young age, I was given a go-kart and learned how to fix it all on my own, self taught. I then purchased my first Snap-on item at 16. I've been hooked ever since! Nothing is better than working with your hands and fixing... read more Automotive - DealershipMiguel AngelMaster Technician at Team NissanOxnard, CaliforniaI am a 10 year Master Technician working at Nissan. I love what I do and love helping people in need even more. It all started when I was 12 years old, a quick tune up on my dad's 88 Toyota truck started it all! The coolest ... read more Automotive - General RepairJustin BrokawTech at Crossroads AutomotiveRochester, New YorkI started as a tech about 2 and a half years ago. I was inspired by my father who was the #1 marine tech on the east coast. I grind every day to do my best, be the best and most honest tech like my father. I do it to make hi... read more SalesmenScott GeigerSnap-on FranchiseeCentral City, IowaI’m 29 years old, from Kenosha and moved out to Iowa to take over a Snap-on route 4 years ago. I have always been a Snap-on user and enthusiast. My dad was a master tech for my entire life, I grew up admiring his purple Mopa... read more Automotive - General RepairChris PoirierOwner at Sunnyside Automotive & TowingSequim, WashingtonI’m a 43-year-old guy that has been in the industry working in and around cars since I was 10 years old starting at my father’s shop. My father was a technician my whole life and I wouldn’t dream of any other job in the worl... read more Automotive - DealershipMagiver AlbaTech at BayRidge ChryslerBrooklyn, New YorkI am 26 years old and started wrenching at 15 years old. I started wrenching with my father outside of where we live, from regular maintenance to suspension work. At the age of 17 I went to trade school. I’ve been working wi... read more Heavy Duty Truck RepairJustin CarothersShop Foreman/Lead Tech at Certified Diesel SolutionsCosby, TennesseeI’ve been turning wrenches for as long as I can remember. I started in the automotive field as a kid working with my dad. As I got older I realized cars weren’t for me but big diesels sure were. I worked on class 8 trucks an... read more Automotive - General RepairColin MillerMechanic at Key TruckCommerce city, ColoradoI’m 27 and work in Denver at Key Truck and Diesel. I started as a wash tech and basically worked my way up by starting hands on. Now, I fix anything and everything, gas and diesel. My Shelby GT500 is the coolest project I h... read more Aviation/AerospaceLuke JonesMuseum SpecialistAldie, VirginiaGrowing up my father would drag my family all over the place to see military shows and airshows. My father always had classic cars and muscle cars sitting in the driveway and motorcycles in the garage. During high school I ... read more Fleet MaintenanceAaron PowellBus TechnicianFranklin, OhioI went to school for diesel tech but out of high school I started working for GM and worked there for 10 years. GM moved to Michigan so I decided to stay in Ohio and I found this bus tech job, and haven't looked back. I am a... read more PowersportsDaniel GregoryLead Powersports Technician at CCSEColorado Springs, ColoradoFirst off, I love my job. I have been a powersports technician for 14 years. I started out working on motocross bikes when I was young and fell in love with it! I worked my way up in the industry by hands on from some of the... read more Automotive - DealershipPenny GirvinAuto MechanicCheswick, PennsylvaniaI'm currently a student in the automotive program at Rosedale Technical College. I actively work on cars in and out of the shop. About 2 years ago, I was getting ready to start school to be an ultrasound technician and after... read more Automotive - DealershipRicky SheltonTechnician at Continental AudiOswego, IllinoisMy father taught most of what I knew and has always pushed me to grow and move forward. Just took his advice and ran with it. I have always been working on cars growing up. Went to school for something completely different. ... read more Automotive - DealershipGregg KirouacTechnician at Terryville ChevroletTerryville, ConnecticutI started working on cars at the age of 8 with my father. He was a Corvette Specialist and worked for a Chevrolet dealership for 35 years. I’ve always loved taking engines apart and rebuilding them. I graduated high school a... read more Automotive - General RepairEric CallDiag Tech at Bradshaw's Auto RepairMilwaukie, OregonMy father was a VW body and repair guy at young age and his passion wore off on me. I started with buying my first car - a 74 Nova at 14. My dad and I painted it, rebuilt the top end, put custom interior in and it was my hig... read more Automotive - DealershipTong YangMechanic at ToyotaFresno, CaliforniaI am currently working at Toyota dealer. I was working at an auto body shop so I figure that working with paint for long term it not going to be good for my health, so I moved on to a Toyota dealer and I love that place. I s... read more Automotive - Specialty ShopBen MetzOwner at Metz Machines LLCKenosha, WisconsinI started working on motorcycles when I was 16 and I even had my own street-bike. I took it to the dealership to get some scheduled maintenance done and was shocked at the price I was quoted, so I attempted to do it myself. ... read more Route DriverMichael MazanyDriver at Southern WineMillbrae, CaliforniaMy childhood best friend’s dad, Daniel, sold Snap-on out of Maple Heights, OH. I got my first calendar for Christmas in ‘83, I was 13 and my mom actually let me hang it in my room. One of my favorite saying to this day is “H... read more Heavy Duty Truck RepairJordan DoddHydraulic Tech at CaterpillarGilbert, ArizonaI started off as a tire tech at a local tire shop. I then was offered an opportunity to start working for Caterpillar. I first started off as a painter, but then I started to rebuild hydraulic cylinders. After learning so mu... read more Aviation/AerospaceIan TerryDirector of MaintenanceSmithsburg, MarylandMy granddad flew as a ball turret gunner on B-17s in WWII. The aviation bug bit me early on with many trips to airshows all over the place. I had no idea what I would do after high school, so my dad suggested I get into doin... read more Automotive - General RepairTeny CheMaster TechnicianFresno, CaliforniaI’ve been working on cars for quite a while now. I started Automotive Shop in high school and never looked back. What started as what would be a side hobby in high school became my career. I just love fixing things that are ... read more Automotive - DealershipDomenic FerraroTechnicianDerry, New HampshireI’ve been around cars for as long as I can remember. I would go to my dad’s shop after school, just helping and watching. After high school I worked at his shop and at a quick lube for a few years. I then started at a dealer... read more Automotive - DealershipJose YbarraShop Foreman at Subaru of Clear LakeHouston, TexasI graduated from UTI in 2009. I started off as a pm tech for a diesel truck company. I worked a family owned shop for a year while I was still in school as a general technician. I did a lot of jumping around for about 5 year... read more Heavy Duty Truck RepairWyatt BlakemanDiesel Mechanic at Interstate Power SystemsGillette, WyomingI’m currently a heavy duty truck mechanic at Interstate Power Systems. I enjoy working on everything diesel from OTR trucks to diesel performance. I have been in the industry for roughly 5 years now and can’t wait to see wha... read more Automotive - DealershipRut RomahMechanic at Carolina NissanGreensboro, North CarolinaI was born in Vietnam. I came to the USA in 2006 in search of freedom. When I came to the United States, I saw a car I was fascinated by. In my country, there are only motorcycles, so that’s why I wanted to work on cars. I w... read more ManufacturingJacob RamlProject ManagerVolga, South DakotaAs a boy, I spent most of my days at my father’s mechanic shop. As I grew, I progressed from cleaning and putting away tools to working alongside my dad. The years working with him not only taught me the value of hard work a... read more Planet Earth QuestDr. Chris FosterPlanet Earth QuestYosemite National Park, CaliforniaI am visiting all the U.S. National Parks, setting a Guinness World Record. I'm maintaining my ride with only Snap-on tools! I started in California, at Yosemite, and will visit all land-based National Parks in the lower-48.... read more MotorsportsScott CallanderWarranty and Technical Manager at Triumph MotorcyclesAtlanta, GeorgiaI grew up working on cars with my dad and building hot rods so I almost feel like I was born into it. We never took a car to the shop and my mom would even get involved. I remember her helping to pull the transmission on our... read more Aviation/AerospaceMatthew MartinMechanic at Nashville Flight TrainingAdams, TennesseeI am a new A&P mechanic in my first job in the industry. I come from a whole family of aviators. My grandfather served in WWII and served all the way up in Thule, Greenland. As he puts it "I was so far north I had to look so... read more ManufacturingJustin StanleyMaintenance MechanicCorydon, KentuckyBeen wrenching as long as I can remember, I work on anything.
Fleet MaintenanceJustin SockriterMechanic at C.w TransportSeaford, DelawareKeeping trucks on the road smoothly and safely is key in my line of work. Six days a week non-stop trucks rolling in and out from general maintenance and up keep to rebuilding p.t.o's - rears, trans, ect. All of our trucks h... read more Automotive - Specialty ShopRoger PrineA/C Tech at Fadallas Auto AirEight Mile, AlabamaIn 1984 my best friend's brother needed some help, he ran a shop called Auto Air of Alabama. It was winter time and they were rebuilding evaporator cores and accumulators and needed help with boxing and labeling. l did 1,100... read more Automotive - DealershipHector TorresLube Tech at Findlay Chevy Buick and GMCBullhead City, ArizonaI'm just a regular guy that had an interest in engines and decided to go ahead and run with it. I got into this line of work when I decided I wanted to put a 454 in my dads old C1500. While it’s still not close to being done... read more Aviation/AerospaceDakota HowardAircraft Mechanic at New Mexico Aero ServiceAlbuquerque, New MexicoI am an 8 month apprentice for New Mexico Aero Service in Moriarty, NM. I have worked all over the board as far as jobs from general construction to commercial airlines and at the end of the day nothing makes me happier then... read more Construction Equipment RepairIsaac RodriguezTech 1 at Warren Equipment CompanyOdessa, TexasI work for Warren Equipment Company in Odessa, TX. I have lived here for the majority of my adult life and have worked in this company for two and a half year now. Before working as a technician, I worked in a family owned ... read more IT SecurityRyan EricksonCar Builder/Cyber Security ArchitectLacey, WashingtonI’m a Cyber Security Architect who grew up racing and building cars with my father. I started working at a shop changing oil in high school and never lost the passion. I moved on to college and information technology, but n... read more Automotive - DealershipShane MatusTechnicianPoincicana, FloridaIt all started when at 8 years old when my uncle brought me into his garage and showed me his 1972 Chevy Nova SS, 502 big block with 4 -120 oz bottles of NOS and at that moment I had to have one. Every day for the next 8 yea... read more Automotive - General RepairRyan TaylorMaster Technician at Affordable Tire and Brake CoPortland, OregonI started out as an 18 year old kid that liked to wrench on his own ride. I left for college to do a 2 year auto tech program. I got a job as an intern and still continue to work for the same shop 8 years later. I started my... read more Automotive - DealershipHunter RicciFord ASSET Technician at Beach FordVirginia Beach, VirginiaIt started out when car culture helped me get better mentally. I then went to Virginia Beach Career and Technical Education Center for automotive service and learned a lot especially coming from little to no knowledge of the... read more Aviation/AerospaceJacob MaslakAir Frame and Power Plant / Masters of Aviation Maintenance StudentEastman, GeorgiaI am pursuing an Air Frame and Power Plant Rating and working on a Masters in Aviation Maintenance! I got into this field because the aerospace industry has always fascinated me. A Model 18 Twin Beech with a twin radial engi... read more Fleet MaintenanceAndy JaconettaSr. Global Vehicle TechnicianMontoursville, PennsylvaniaIt all started when my dad showed me how to work on our family cars when I was 8. My father was replacing the head gasket on our 80's wood-paneled Chrysler station wagon. He was having trouble lifting the head onto the engin... read more Heavy Duty Truck RepairNestor ClavelDiesel Mechanic at Valleys DieselVisalia, CaliforniaI have been working on cars for almost 4 years now and it’s honestly the best thing that has happened in my life! I love working on cars - taking stuff apart and putting it back together and having that feeling of accomplish... read more Heavy Duty Truck RepairDaniel BakerDiesel Technician at DSU Peterbilt PortlandPortland, OregonIt all started in high school of course and having fuel in my veins. I got a machine/manufacturing job. Life happened and I got introduced to the big rigs. You think you know wrenching until you work on a big rig! Nothing is... read more Automotive - DealershipPaul CollinsMotorcycle/SxS Technician at RideNowEl Mirage, ArizonaI have loved motorcycles since I was a kid riding my mom’s old Honda 185 three wheeler. I had been riding bikes long enough that I wanted to start fixing them myself. I got an opportunity to go to MMI after the Air Force. Th... read more Auto Body/Collision RepairAndy RoiniotisCollision Repair Technician at Pulera Collision CenterKenosha, WisconsinWhen I turned 16 and purchased my first car, I immediately had to paint the wheels and calipers on my 2000 Mitsubishi Eclipse. From that, I starting painting wheels, calipers, spoilers, roofs, etc. I eventually went to schoo... read more Automotive - Specialty ShopTanor KiddAutomotive/Motorcycle Mechanic Apprentice at Wrench Worx OKCOKC, OklahomaI’m a 3rd generation mechanic and was born on a bike. I’ve worked in my grandfather’s shop for the past 4 summers and winters. We have built many cars, trucks and bikes together. After I finish college, I want to be certifie... read more Automotive - DealershipJuan BeltranAutomotive Technician at CarMaxGarland, TexasI attended UTI and I've been a tech for the past 4 years. I normally recondition cars so they can be sold on the lot. Last year, I suffered a stroke caused by the flu. That basically put a wrench in my plans to grow as a mec... read more Auto Body/Collision RepairSuspension TechnicianSuspension TechnicianFontana, CaliforniaI was brought up around classic cars and Snap-on tools as a kid. I joined the U.S. Marine Corp. and became a mechanic. I’ve been doing it now for 25 years! A '68 Dodge Charger is my favorite project!
Automotive - General RepairJoshua SmithAuto Technician at Emery Auto and Diesel RepairEnglewood, FloridaI work in an auto repair shop, I have been doing it for 12 years. I just started using Snap-on tools a year ago and I will never buy another tool from another company again. They are the best quality tools I’ve worked with. ... read more Automotive - DealershipChristian QuinteroDiesel Technician at Texan GMCHuffman, TexasI starting wrenching with my dad growing up and have been doing it ever since! Quality tools were a must when doing things right and now that I’m doing it for a living, Snap-on is the way to go. An engine replacement on a 20... read more Automotive - General RepairLuis RamirezGSM at PepboysEatontown, New JerseyI just started in the field, I'm 35 years old. I’ve always had a passion fixing stuff and I finally desired to attend college in the automotive technology program. I took 2 years to get it done. I graduated in 2020 and am no... read more Automotive - DealershipGustavo RoblesLine Technician at Ammaars Toyota VacavilleWoodland, CaliforniaI am 21 years old and cars are my life! Being in this profession has given me so many opportunities to meet amazing people and learn a lot of new skills that not only make me a better tech, but also help put food on the tabl... read more Military & DefenseRyan TurnerStaff Sergeant at U.S. ArmySoddy Daisy, TennesseeI’m a Construction Engineering Supervisor in the U.S. Army. I have used many Snap-on tools throughout my career; from hand tools, to welding equipment, a Snap-on tool has never let me down! I joined the Army as a Carpentry/M... read more Automotive - DealershipAndrew WeimerskirkTechnician Rockford, IllinoisI attended Lincoln Tech in late 2015. Now, I work at a local Chevy/VW/BMW dealership. I started wrenching on cars when I was 8 years old and I never learned to put the wrench down! At one of last shops I worked in, a custome... read more Waste HandlingCody LemastersHeavy Equipment Mechanic at Carolina Processing & RecyclingSummerville, South CarolinaI became a heavy equipment mechanic a little over 3 years ago. I was offered the job one day while running heavy equipment and repairing it on my time off. When I first started, I used nothing but no-named tools because I ne... read more Construction Equipment RepairJimmy DolinskiLead Tech at Odeys Field ExpertsPapillion, NebraskaI grew up with my grandpa and uncle restoring old 442s in the backyard of the house. I watched, learned and took many trips to Genuine Parts to see my grandma and pick up parts. I love using my hands and solving problems. I ... read more Construction Equipment RepairRyan BellMobile Servive Technician at Home Depot RentalEdmond, OklahomaGrowing up with a dad working in dealerships, I’ve always enjoyed working with my hands and fixing stuff. My dad played a big role in influencing my line of work, but instead of going automotive I went heavy equipment repair... read more Auto Body/Collision RepairSteffen ReddenMotorcycle Mechanic/Car PainterAvon Park, FloridaI fell in love with the dirt bikes boys riding up and down the streets in Baltimore back in the early 1990's. I got a 2 stroke 500cc and my red wings. At 18 I found an ad in the penny saver for a mask and taper at Earl Schei... read more Fruit productionRoberto Cervantes JrStacker at Sunrise GrowetsSanta Maria, CaliforniaI’m currently working at a fruit production place and in a month I will be going to UTI. I start on July 20th in Rancho, Cucamonga. I’m 18 years old and I’ve worked on a lot of different cars. I got into mechanics when I was... read more Automotive - DealershipZack MarinoAutomotive Technician at Sierra SubaruAzusa, CaliforniaI’m 22 years old working in the automotive industry. I really enjoy working on cars, whether it’s at home on my own car, my friends cars or at work. I started at an auto parts warehouse and I wanted to get into something I’v... read more Fleet MaintenanceGarrett ColbathMechanic/welder at Agricycle EnergyExeter, MaineI’m 20 years old and I’ve been working with this company for 6 months now as a diesel mechanic/ welder. We haul food waste to a local farm that’s using that food waste as power. I love my job! I went through an automotive pr... read more Automotive - General RepairMatthew JohnstonHead MechanicBridgeport, ConnecticutI’m just an average guy, living an average life, trying to strive for extraordinary. Coming out of high school, I was looking at a life of trouble. I knew I loved cars and needed a career. It’s been 10+ years now and I run m... read more Automotive - General RepairJacob LandisOwner of Shawleytown Auto Repair & SignsSomerset, PennsylvaniaI grew up helping my dad work on vehicles. Literally I was 2 years and helping him. Then as I got older we switched roles. In, September 2009 I lost my dad. That tore me to pieces, but I've been pushing through it. I know he... read more Heavy Duty Truck RepairCasi PerezLvl 2 Fleet Tech at Swift TransportationReno, NevadaI’ve always wanted to be a diesel mechanic since I was in high school. I watched these neat looking rigs drive by all the time. I always wondered why diesel trucks sound so powerful. I was working two jobs: one was Home Depo... read more Construction Equipment RepairJoshua FariaDiesel MechanicModesto, California I have been a heavy duty mechanic for about 7 years and in all life’s up and downs I've always had a job that pays well. This is due to attention to detail in the repair and the quality of my tools being able to do the job ... read more Automotive - DealershipFranky HuizarService Tech at Sierra ChevroletMonrovia, CaliforniaI’m 31 years old and I’ve been in the industry going on 10 years now. I first started working at AutoZone to not only get familiar with the names of parts, but because it was the only place that was hiring that was fairly si... read more Automotive RestorationSophie GilbertAuto Refinisher/MechanicLynnwood, WashingtonGrowing up, my dad instilled in me a passion for automobiles. Although we may not have the same taste in cars, we both share a love of anything that puts humans on the move. My love of cars however was masked for a long time... read more Automotive - Specialty ShopPreston GeraldTech at V3 Jeep ShopSpringfield, KentuckyI'm 25 and have been working on cars for about 8 years. I’ve been around performance my whole life. I work at a Jeep shop and build custom rigs. I love Mustangs, fast cars and of course Snap-on to get the job done! My dad wa... read more Agriculture Equipment RepairPhilip BentzRestore John Deere Tractors at Self EmployedWashington, KansasI have always been amazed by machines and agriculture equipment. My grandpa and dad have been farmers their whole lives. It was always the best part of my day when I got to go help dad get the machinery ready for whatever jo... read more Auto Body/Collision RepairTyler BoydCollision Repair Technician at Lewis CollisionFarmington, ArkansasI work in a modern production collision repair facility and have for the last 8 years. I take tremendous pride in my workmanship and quality in my repairs as late model vehicles become more and more technologically advanced ... read more Heavy Duty Truck RepairSean BeatyTechnician at Atlantic Emergency SolutionsBelmont, North CarolinaI started out as a “gopher” for a local construction company. I picked up parts, cleaned the shop and assisted the mechanics. As mechanics came and went, I picked up some skills and bought my first tool set and helped out wh... read more Automotive - DealershipTyler PerryTechnicianPottsville, PennsylvaniaI found my true passion! My pops used to work on cars and I would always help him in any way I could. Although he passed away, his passion for cars definitely lives on through me. I learned a lot from him and didn’t have a f... read more Heavy Duty Truck RepairTyler BrandWelder at Omaha Track EquipmentOmaha, Nebraska
Automotive - DealershipBailey AnastasoffTechnician at Hyundai DealerScarborough, MaineI started getting into automotive when I joined the military in 2018 as a mechanic. I have a huge love for cars and figured I might as well make something out of it. After completing my schooling, I realized I can use the sk... read more Aviation/AerospaceJohn LasnierAircraft MechanicCoventry, Connecticut
Motorcycle & Outdoor Power Equipment RepairKyle BondShop OwnerEagle Mountain, UtahI was sick of working behind a desk and working for somebody, so I opened my own small engine repair shop which allows me to feed my tool addiction, work on motorcycles and OPE and be my own boss. There was a need for my lin... read more Heavy Duty Truck RepairMichael ThornDiesel Technician at Equipment MaintenanceWaterbury, ConnecticutI was adopted at a young age and grew up to beat the "statistics". Growing up, I was always interested in trucks. Like semi and off road equipment. I went to a trade high school for Residential and Commercial Electrical. Wh... read more Aviation/AerospaceAustin BanttariAircraft Mechanic at Lakeland Aircraft MaintenanceLakeland, FloridaTurning 20 in February, I've been an aircraft mechanic since I was 17 during my senior year of high school. I was taking a few aircraft maintenance classes at my school and I had just earned my pilot's license on a scholarsh... read more Fleet MaintenanceEmanuel ColemanDiesel Technician at McIlwain Charters Inc.Jerome, PennsylvaniaMy name is Emanuel, I am a diesel technician for McIlwain School Bus and Charter Busfleet shop. We have over 259 vehicles we maintain. I have been turning wrenches since I was 12 years old. Some of the stuff I get involved w... read more Automotive - DealershipAlexis VillafanaMaster Technician at McAuley FordPatterson, CaliforniaI never worked on cars before and doing well in school wasn’t my thing, but I had a huge passion for cars since childhood. I met the UTI representative my senior year and was hooked. Took the automotive and Ford Fact Program... read more RacingCameron ConnellPerformance Engineer at Injected EngineeringCanton, GeorgiaAs a Mopar and Ford performance shop, we get a lot of Hellcats wanting some more power! I’m doing a pulley swap, 1200cc injectors, thermostat and crank pin! When I was 14, I started competing in dirt track racing. My love fo... read more Heavy Duty Truck RepairMarcelo De AzevedoDiesel Technician at Truck Enterprise ManassasSpringfield, VirginiaSince I was 4 years old, I was always in the garage working with my dad and older brother on anything that needed fixing. And since then, I fell in love with working on old cars, new cars or anything that had an engine reall... read more Automotive - DealershipAdam BlackmonTech apprentice at Hendrick CDJRRemlap, AlabamaI’m 19 and working in a dealership under a diesel tech. I have been working here for about 2 years now. Tech school at the high school I graduated from is what got me into this line of work, I took 2 years of automotive. A R... read more Automotive - DealershipKyle BarkeyAuto/Diesel/Smog Tech at Morgan Attwood & SonLancaster, CaliforniaI have been an automotive technician for about 9 years, and I have had Snap-on tools my entire career and will continue to use the best in the business. I love working on cars and have always wanted to be a mechanic since gr... read more Automotive - DealershipFaraaz KassimTechnician at Largo HondaMiami, Florida
Aviation/AerospaceCole AdamsonA/P MechanicPiedmont, OklahomaMy name is Cole Adamson, I’m 27 and I’ve always had a passion for aviation and mechanic work, which all got started when I joined the Oklahoma Air National Guard in 2017. In the guard I am an Aerospace Propulsion Mechanic on... read more Construction Equipment RepairJose OlivaLine Mechanic at Sunstate Equipment CoLos Angeles, CaliforniaMy dad was a forklift mechanic, but he never wanted me to enter this field of work. After high school, I decided to go to Universal Technical Institute and after I completed the program I entered the apprentice program at Su... read more Automotive - DealershipJose JuarezDiesel Mechanic at Sunrise Ford Of North HollywoodSylmar, CaliforniaI’m 23 years old and I’ve been in the military since I was 17. I started wrenching at the age of 16 on and off as a hobby. Nothing crazy just helping my friends and neighbor with brakes and oil changes. After being in the mi... read more Automotive - General RepairJoseph WilkeApprenticing Mechanic at Terry’s Automotive & MarineIngram, TexasMy name is Joseph, I’m 18 years old and I’ve been into cars my whole life. Ever since I got my first truck, I’ve loved working on cars. I decided to go to St. Philips College in San Antonio, TX to learn more about the field,... read more Forklift mechanicCarlos CarmonaForklift Mechanic at Office DepotOrange, CaliforniaFrom the age of 16-23 I worked in retail with no bright future in sight. I landed a job at Office Depot working in the maintenance department as a warehouse associate changing forklift batteries and handing out scanners. The... read more Automotive - DealershipZach LeirasAuto TechnicianBel Air, MarylandFresh out of high school, I went right into the trade. I’m still new only being 20 years old, but I can’t see myself doing anything else! I’ve worked for Subaru for over 2 years now and I love it! I love the cars and the fee... read more Auto Body/Collision RepairRyan BrowningCollision Repair TechShelbyville, IndianaI started in the automotive field in 2005, straight out of high school. I went to Lincoln Tech in June 2005. I worked full-time at a platinum rated body shop as an apprentice during college, 8 hours a day with an hour drive ... read more Heavy duty technicianAntonio UribeHeavy Duty Technician at Republic ServicesLawrenceville, VirginiaI started in this line of work by taking an auto mechanics class. I didn’t like any mechanic work before that. After doing it for 2 years and becoming ASE student certified, I decided to go into heavy duty. I signed up for d... read more Automotive - General RepairMatt ComrieCar Mechanic at AutoZoneLafayette, ColoradoI work part-time at AutoZone and have really enjoyed starting to fix my own car at home. I only have two Snap-on tools but hope to get more! Fixing my car has helped me save money, learn more, and even relax a bit too! I hav... read more Auto Body/Collision RepairCharles SchlinkmanAuto Body TechLancaster, PennsylvaniaI am 33 years old and have been working in a body shop since I was 15. I can’t find anything more fulfilling than taking a broken and smashed vehicle and making it new again. I am a third generation auto body tech. I recentl... read more Aviation/AerospaceJoan RodriguezTurbine Mechanic at MD TurbineHialeah, FloridaI grew up always being around tools in my dad’s shop and always understanding you need the right tool for the job. Snap-on has always been the go-to #1 choice. I graduated high school and I wanted to work with my hands in a ... read more Automotive - Specialty ShopKyle RamseyMechanic at Rapid Tire and AutoSmith Station, AlabamaIt all started when I was little and wanted to see how things worked. Now I work on everything from cars to heavy equipment! My paw paw was a mechanic and that is how I got into this line of work. A 1954 Chevy pickup is the... read more Automotive - Specialty ShopJonathan OsunaService Manager at Delek & Sons 76Santa Monica, CaliforniaSince I was a kid I used to tinker with anything - my mom's car or a broken DVD to broken Xbox. Eventually reaching 16 I got more into cars by being next to neighbors at my downstairs garage apartment. I took auto shop at 16... read more Heavy Duty Truck RepairAdam OldhamTech level 2 at PenskeWhite House, TennesseeI started out in trade school to become a machinist/welder, while working at Penske washing trucks. I worked as a machinist and a truck washer for months. I left Penske for a couple months then I realized I wanted to learn h... read more Public WorksDan CoxPublic Works at Village of GurneeBristol, WisconsinI started competing in motocross races when I was 10 years old. I would help my dad in the garage while he worked on my bikes and I learned how to wrench. I kept my passion in motorbikes up until I was 18. When I turned 19, ... read more Automotive - General RepairWyatt CurtisAuto TechnicianJacksonville, FloridaI first got into cars and mechanics as a little kid playing Gran Turismo 2 with my dad on the PlayStation. He knew I had a thing for cars and turning wrenches, so when I got a little older he started bringing me out into the... read more Power GenerationNikolai Ray GonzalesMechanic at Chugach ElectricAnchorage, AlaskaHello my name is Nikolai Ray Gonzales. I first started wrenching with my father who would do simple repairs on our family vehicles. I found out I was really good at taking things apart and pretty good at putting them back to... read more Automotive - General RepairMark HanksLead Diagnostic Technician at Affordable Tire and BrakeColumbia City, OregonI am an ASE certified master auto tech working on getting L1 certified. I always liked working on cars. A 1968 Chevelle is the coolest project I have worked on, because it is mine! One of the funniest things that has happene... read more Heavy Duty Truck RepairJoseph MirabellaDiesel Technician at JX PeterbiltMadison, WisconsinI got into this field kind of late, I'd been tinkering on cars and trucks since I was a kid. When I joined the military, I decided to go into the medical field. After fixing people for 20 years, I figured it was time to do w... read more Automotive - DealershipRyan RettigTechnician at Dempsey DodgePlano, Illinois I have been fixing cars for about 7 years now. I started with my first car that broke down a lot: a Jeep. I fixed it myself to save money and have been hooked on it ever since, whether it’s at work, at home, or on the trail... read more Agriculture Equipment RepairLyman TickleJack of all trades at Tickle's FarmAvonmore, PennsylvaniaI grew up on a family run farm. My father was a professional mechanic and I learned the skills from him to keep our machinery running. If I was only 1/10th of the mechanic he was, I'll do fine. Thanks for the lessons, dad! A... read more Motorcycle and bikesChristian HartmanMotorcycle/ Bike Mechanic at JBA Custom CyclesCape Coral, FloridaWhen I was just a small boy I always looked up to my dad. I always saw a red Snap-on box, he had every tool you can imagine. I got into motocross racing when I was just 2 years old. My dad and I always worked together and he... read more ManufacturingDavid SpinneyOwner at Tool SolutionsCORAL SPRINGS, FloridaMy dad had a repair shop outside of Boston in the 1950's. My uncle always had GTO's and would take me to drag races. All my friends had muscle cars when I was old enough to drive. My first car was a 1965 VW bug. Going to col... read more Automotive - Specialty ShopDylan MendozaAutomotive Technician at Xsedo Enterprise LLCTucson, ArizonaI work in a specialty Audi automotive shop where we handle ordinary maintenance as well as custom work, such as big swaps like changing out the Audi 4.2l V8 for the 2.7l Biturbo V6. We also do full builds if the client would... read more Automotive - Specialty ShopAndrew HutchinsonShop foreman at AudiTucson, ArizonaI started in the automotive industry young, I was the first in my family in fact. In high school I attended the automotive course, after high school I went on to job corps for automotive technology. After job corps I got int... read more Automotive - General RepairAnthony AragonMechanic at Premier Auto CareHouston, TexasI’m a young person and I was living in Honduras and my dad came to the U.S to buy cars and tools and that’s how I met Snap-on tools. Then, I came to live here and I began to buy my own Snap-on tools. My dad is a mechanic, so... read more Auto tech school TCATJesse BassettAuto Tech Student at TCATClarksville, TennesseeI just started automotive technology at TCAT in January! I have met a lot of cool people and learned a lot! My instructor is awesome and working in the shop is very fun! I signed up for school because it sounded interesting!
General repairAlan TuckerTucker MaintenancePaducah, KentuckyIn the late 50's early 60's my dad had a real service station and garage. It was a small-town-did-everything type of business. His pride and joy was his collection of Snap-on tools. That is the quality I grew up with. I stil... read more Automotive - DealershipTim LoweryLube Technician at Lou Bachrodt AutomallRockford, IllinoisWhen I was a kid, I always used to change brake pads with my grandfather, this changed into rebuilding most of my suspension on my first car. I took off from there. This launched my career into automotive and inspired me to ... read more Automotive - General RepairMichael SalamatianMechanic at Magic Auto RepairOklahoma city, OklahomaMy dad got me into the field. I remember as a kid working at my dad’s shop saying the Snap-on truck comes over on Tuesdays and being so excited to go in there and look at all the tools! I still to this day work on my desktop... read more Heavy Duty Truck RepairBlake TriplettDiesel Technician at J.B HuntRogers, ArkansasI started out working when I was able to drive at 16 years of age. My first car was a 2007 Mustang and ever since then I’ve always been a Mustang fan. I miss that car! I was young and dumb and totaled it, still need to get o... read more Agriculture Equipment RepairMatthew HansenBasic Mechanic at ChemscapeCampbell Hall, New YorkI just turned 18 and have been learning mechanics from YouTube. I had to take over fixing my dad’s landscaping equipment because his worker died last year. I just love to fix my cars and my dad’s equipment. When I couldn’t a... read more ManufacturingSheri BanksAssembly Associate at Snap-onConway, Arkansas
Automotive - General RepairDaniel SalazarLube and Tire Tech at Big Brand Tire and ServiceVisalia, CaliforniaOne of my most recent projects was restoring a toolbox that was covered in rust and wheels that were stuck. I sanded it all down, cleaned out the whole toolbox, primed and painted the toolbox. Took me about 4 days of working... read more Heavy Duty Truck RepairAdam MogilinskiDiesel MechanicPlainfield, IllinoisI’m a 23 year old Diesel Mechanic. I have been wrenching for almost 6 years and started because I enlisted in the U.S. Army and my job was a 91B Wheeled Vehicle Mechanic. I now work at a Freightliner Dealership and I’m the m... read more Automotive - DealershipElmar MontenegroExpress Tech at Mike Ward InfinitiDenver, ColoradoMy story started in the year of 2018. I was always confused about what I wanted to do in life. But, I got the chance to go to technical college for auto technician and for FREE! So that was obviously an opportunity I couldn’... read more DIYAndrew MorrisHobbyistHarrisburg, PennsylvaniaI used your tools to construct my 3D printer, the knurled shaft on the screwdriver made assembly a breeze. I got into fixing things just for fun, I was looking for a hobby. Fixing up my car and building my 3D printer was the... read more Automotive - DealershipMatthew StephensMechanic at FordDowningtown, PennsylvaniaI got into cars as a kid, my dad use to always fix our cars and I always helped. My grandfather also worked for Ford, a parts guy for 30 years I think. If he was still around, he would be proud that I, out of all his grandki... read more Heavy Duty Truck RepairRex ChapmanDiesel Mechanic at R&K TruckingHelena, MontanaMy name is Rex Chapman, I'm 22 years old with a beautiful wife and 3 year old boy. I'm from Helena, MT. I spend most of my off time hunting the big game available in the western states and shoot BenchRest and F-Class matches... read more Construction Equipment RepairMatthew McNallyField Service Technician at Herc Equipment RentalsHoltsville, New YorkI’m a 38 year old going on my 15th year working in the equipment industry. I started my career working for a Hyster forklift dealer, then I moved on to the equipment rental industry. I always was curious about how things wor... read more Automotive - Specialty ShopZach DumireShop Foreman at Wades MotorsportsYork, South CarolinaMy dad came to the shop to get some parts and mentioned to me about how he was looking for someone and I’ve been here ever since. I was always so skeptical if I would ever be able to own Snap-on and all my other tools were b... read more Agriculture Equipment RepairTrenton SmithGeneral Manager at Jack's Engine Machine WorksDalhart, TexasAround my parts it’s all agricultural work. If not ranching its farming. I grew up ranching and there’s only so much you can learn. Doing mechanic work on irrigation engines seemed to have a lot to offer, it's been a little ... read more Small Engine RepairJimmy HernandezSmall Engine Technician at MAE Power EquipmentAlton, TexasI got stared in this industry as a hobby, then a small shop at home. Now I’m working for MAE Power Equipment. I’m a small engine technician. I wake up every morning happy to go to work. My Dad passed away in 2011. He was a m... read more Automotive - General RepairKyle EndowStudent/TechEl Cerrito, CaliforniaIt was almost a guarantee that I was going to like working with my hands. My dad is a mechanic and my grandfather was a mechanic, so I've been around the industry my whole life. When I was young my dad would bring me into th... read more Auto Body/Collision RepairBrian WhitesellEuropean Collision Repair TechnicianClarksville, TennesseeI used to be active duty in the Air Force and when I finished out my contract I went to collision repair college where I started learning. I've always loved cars since I was in high school and I've always wanted to do it pro... read more Automotive - DealershipIan VazquezMechanic at Auto CityOroville, CaliforniaI’ve been in the field for 7 years. I’m currently the only mechanic at the shop I’m at and honestly, I love it. I keep it clean and tidy and never have to pick up after others. I went to trade school twice and practically li... read more Heavy Duty Truck RepairAmy ConliDiesel MechanicBend, OregonMy name is Amy. I work as a mobile diesel mechanic in Central Oregon. The company I currently work for is just two people, my boss and I. We work on anything diesel from generators to pickups, truck and trailers and equipmen... read more Automotive - General RepairHarrison ChagnonMechanic / FarmerWesterly, Rhode IslandI started out on the family farm learning to work on the tractors, and had a passion for turning wrenches. My sophomore year of high school I was eligible to transfer schools and take automotive at my local Career and Techni... read more Automotive - DealershipStephen BeckerAuto TechnicianEnfield, New HampshireMy father is a mechanic, and I grew up around him repairing all sorts of vehicles and machinery. I have always had an interest in working with my hands and taking things apart and putting them together. I followed my father... read more Heavy Duty Truck RepairLuis CamachoHeavy Equipment Mechanic at Inyo County Road DepartmentLone Pine, CaliforniaI was born in Los Mochis, Sinaloa. I was brought over to the United States when I was about 3 years old. My father was always fixing our vehicles because we couldn’t afford to have someone fix them, so I was always right nex... read more Automotive - DealershipEdward DeiroLead Technician at Fairview MotorsSaint Francis, WisconsinI've been wrenching since 1994 right out of tech school. I have always liked to take things apart and put them back together and build things. I like to figure out how things work. I figured I would take a class to learn how... read more Transportation - Bridge & Highway ConstructionJacob ManuelLab TechnicianMustang, Oklahoma I went to a vocational education center after high school for automotive service and started a career in the automotive industry afterwards. I stayed for about four years until becoming a technician for the Oklahoma Departm... read more Automotive - General RepairChristopher SmithAutomotive technician at Plaza TireFarmington, MissouriI’ve been a loyal customer to Snap-on for 14 years. My 1st box was a classic 76 limited edition Ted Nugent edition. I absolutely loved it, but I out grew it and upgraded to Master Series triple bank custom power top and rhi... read more Construction Equipment RepairDonald ToddEngine Specialist at Thompson Tractor Inc.Trafford, AlabamaI decided to become a diesel mechanic in 2009 and in August of 2009 I joined the Marine Corps as an automotive mechanic. Since then, my passion for diesel mechanics has grown immensely. I am now an Engine Specialist at a Cat... read more Appliance repairCharles ErdahlAppliance RepairIrvine, CaliforniaI began working on small machines at a young age and I got into this line of work by training with my friend’s dad. I was first introduced to Snap-on when I was in high school. Ever since then it has been my mission to not o... read more Heavy Duty Truck RepairDavid CookDiesel mechanic at Route 19 Heavy Truck RepairHadley, PennsylvaniaI am 23 years old and I have been turning wrenches all my life at my dad’s shop. When I turned 18, I went ahead and went to work for Chrysler and from that moment on I always wanted to do the best work I could possibly do wi... read more Heavy Duty Truck RepairNick FossDiesel Tech 2 at Petro/Travel Centers of AmericaKingman, ArizonaI’ve always wanted to be a mechanic and the opportunity was given to me. The coolest project I worked on was a cab over a semi truck.
Aviation/AerospaceMichael AnthonyEMC Test Engineer at Professional Testing Inc.Round Rock, TexasAfter spending many years as the customer getting my products tested to get onboard the aircraft, I am now working for the test lab. I specialize in testing products in the RF and electromagnetic fields. It can be very chall... read more Auto Body/Collision RepairDez FerrellOwner / Custom Paint and Autobody at Nessys KustomsMaricopa, ArizonaI didn’t grow up in a shop, nor did I have any interest in cars most of my life. It wasn’t until I owned a Honda Accord that introduced me to the huge import scene that was going on about 14 years ago. Lots of car shows and ... read more HVACBrandon LeppoldCentrifugal Chiller Tech at ACSChino Hills, CaliforniaI work for the local union 250. I started my first three years pipe fitting, then went on to be a large tonnage tech. I love the trade and working with my hands. I hope to add a lot more Snap-on tools to my collection along ... read more RacingConnor BergPowersports MechanicPerryhall, MarylandI am a 17 year old power sports mechanic who just fell in love with the wrench. I started working on dirt bikes as a little kid and just fell in love with the way that a ratchet clicked. Ever since then I have worked on anyt... read more Automotive - General RepairCarlos VillafanaMechanicLeander, TexasI’m a mechanic, I just started about two years ago. I love everything about cars. I have a 1966 VW bug my dad got it for me when I turned 18. There’s still lots to do on it, but I’m happy and glad I have Snap-on tools to get... read more Technical Education - students and instructorsAnthony ODiesel Technician (in training)Long Pond, PennsylvaniaEver since I was a kid, I have always had a fascination with cars and trucks. I would name the makes, models, and engines of the cars we would drive by on road trips. As I got older, I would research different trucks and cus... read more ForgingAlec MertzProject crew at Scot ForgeMcHenry, IllinoisI have been into working on stuff ever since I could remember. In high school I got into heavy machinery and started out welding at Miller Formless in McHenry, Illinois. I always wanted to be a Welder/Fabricator, but I lived... read more Aviation/AerospaceSugun RattiAircraft Technician at JetworxLittlerock, CaliforniaI moved here from India about 5 years ago. I’ve always wanted to be a pilot but could never afford it and eventually stumbled upon a vocational school website offering an A&P program. No one in my entire family is mechanical... read more ManufacturingSteven SpauldingMachine Operator at Snap-onMilwaukee, WisconsinI’ve always been proud of the work I do, going out and making the best tool out there.
ManufacturingFrankie ColemanForge Support Machinist at Snap-onElizabethton, TennesseeWe must be doing pretty good if we made it to 100 years!
ManufacturingShirley Summers4 Post Assembly at Challenger LiftsLouisville, KentuckyIf I take my car to a shop, I know what my car is rolling up on. I know how they're going to use it to do what they need to do. Here at my job it's a really good, friendly environment and they care about safety.
ManufacturingMichelle NicholsonForm & Weld Operator at Snap-onAlgona, IowaI love the quality of the tools we make.
Aviation/AerospaceJay AlbertsonJet MechanicTucson, ArizonaMy father encouraged me to get into aviation. I was a Gulfstream jet mechanic and used a Snap-on classic 78 for my daily tasks maintaining corporate jets. Rebuilding a neglected Gulfstream III from nose to tail was one of my... read more ManufacturingFrank WeissSocket Machine Operator at Snap-onMilwaukee, WisconsinWe have a good group of employees as well as managers. You might not get the solution you wanted, but at least they listen. They listen and think about it.
ManufacturingJerry BennettAssembly Associate at Snap-onConway, Arkansas
Automotive - General RepairBearded MechanicTechnicianGreen Brook, New JerseyAfter going through a rough patch in life I started looking into a trade to work in, and that’s when I found out being a mechanic is my best bet. I got into my line of work after being a service writer at the start of my car... read more Power GenerationEbonie GrahamDiesel Technician/ Power Generation Technician at Cummins/Travel Centers of AmericaAtlanta, GeorgiaI’m from Lexington, KY but I live in Atlanta, GA. I’ve always been talented with my hands with a love for old school cars. I started my journey at University Technical Institute in Lisle, Illinois for automotive technology. ... read more ManufacturingKenneth RhodesAssembly Associate at Snap-onConway, Arkansas
Construction Equipment RepairAutumn EbertHeavy Equipment Mechanic at RDO EquipmentBlack Cayon City, ArizonaHi my name is Autumn. I am a full time heavy equipment mechanic. I work for a John Deere dealership in Phoenix, AZ. My journey began back when I was a kid, I used to work on cars with my dad and in high school I took auto sh... read more Aviation/AerospaceJordan BussardAviation Mechanic Apprentice at CD Aviation ServicesJoplin, MissouriI’ve always loved aviation and I got into aviation maintenance after originally wanting to be a Pilot. I talked to the owner of the airport in my hometown of Aurora and they gave me a job cleaning planes and shadowing the A ... read more Heavy Duty Truck RepairMatt GarciaDiesel MechanicOrland Park, IllinoisI’ve been an auto mechanic for over 13 years and decided to become a involved in the commercial tire industry 4 years ago and now I got accepted into a Kenworth dealership as a diesel mechanic trainee. I’ve been at this job ... read more ManufacturingGina EvansAssembler at Snap-onConway, ArkansasWe all help each other, and we always make time for each other.
Automotive - General RepairScarlett BlancoMechanic at Mavis TireSomerset, New JerseyMy name is Scarlett, I'm 27 years old, I'm in the automotive field, and I've been a mechanic for 9 years now and loving it. I wouldn't change my job for anything! Sure being a woman in this field has its ups and downs but it... read more Automotive - Specialty ShopJuan OrregoWelder/Fabricator at JJ Audio DesignsOrlando, FloridaI got into working on cars because of my brother. He wanted an audio system so I learned. From there I started buying tools and learning how to build cool stuff. I started building car audio about 15 years ago in Circuit Cit... read more Automotive - General RepairNoah HoltDiesel Technician at Mad Diesel PerformanceFlushing, MichiganI am an 18 year old who has a huge passion for Diesel Trucks. Eat, sleep, and breathe diesel. I started wrenching with my dad as a kid and ever since I started wrenching I couldn’t stop. I started working in a diesel shop pa... read more Automotive - Specialty ShopRyan ChiarellaWelderWest Long Branch, New JerseyAfter I discovered my love of welding through my work on classic VWs I enrolled in school to obtain my 6G welding certification. I’ve been working in the field for two years now and am returning to get certified in TIG weldi... read more RacingBrian WilsonCrew Chief at Team PenskeMooresville, North CarolinaA second-generation race engineer, I am a native of Detroit, Mich. I grew up around racing and began competing in go-karts at age eight. My father, Steve, was also a racer and in 1995 served as a race engineer for the No. 33... read more RacingJeremy BullinsCrew Chief at Team PenskeMooresville, North CarolinaGrowing up in North Carolina, racing was a constant presence to me. My father worked on dirt late model cars in Piedmont Triad area and I began accompanying my dad to the race shop and 311 Speedway in Madison, N.C., when I w... read more Automotive - Specialty ShopValentino Gotay12volt Wiring TechnicianCoram, New YorkI always use to take everything apart to see how it would work and then try to figure out how to put it together. Once I was in high school I took every auto class I could and joined the robotics team. From high school I wen... read more Automotive - General RepairJonathan GattereauC-Level Tech & Apprentice at Nassau County Police Department & PetrolwerksBaldwin, New YorkMy name is Jonathan Gattereau I’m 19 years old. Since my sophomore year in high school I’ve been working in an auto garage because I realized that I wanted to be a Mechanic. Not too soon after, I realized I want to be an exo... read more RacingPaul WolfeCrew Chief at Team PenskeMooresville, North CarolinaI started working on race cars and being involved in racing started when I was a young kid in upstate New York. My dad worked on dirt modified cars in our local area and would always bring me to the shop and the track. At a... read more Power GenerationJoseph BoucherGenerator Technician at A & J Generator and Equipment LLCSeymour, ConnecticutMy name is Joseph Boucher, I've been working on engines and generators for as long as I can remember. My Father has been in the generator Industry for 35 years, and since there aren't full on trade schools for generator tech... read more Fire ApparatusCody GreavesEngine Captain/Shop Foreman Fabricator at Moab Fire DepartmentMoab, UtahI found my dream job in the fire service. I just stumbled across it one day. I get to do everything I love in one job. I get to serve my community, fix the apparatus I operate and fabricate new parts. I get to do it all, I r... read more Aviation/AerospaceSean CaseMaintenance Manager / Tactical Flight Officer at Nebraska State PatrolLincoln, NebraskaI have been a gear head most of my life. I started out in the mechanical line of work right after high school. I was immersed into the truck and trailer off-road diesel hauling business. I began with a grease gun in hand and... read more RacingDarin RussellEngine Tuner at Penske RacingMooresville, North CarolinaI am a 21 year veteran in the NASCAR Cup series. I have worked with a lot of different drivers. I have won a lot of races and have 2 championships. It started when I met some people that had a late model race car they raced ... read more Automotive - Specialty ShopJuan MartinezAutomotive Electrician at Giuseppe Auto RepairMiami, FloridaI'm an automotive electrician, European cars are my new specialty. I do key programming, module adaptation, airbag reset, and ECU re-flashing using Snap-on tools.
RacingDaniel LynchInterior Mechanic #12 Cup Car at Team PenskeMooresville, North CarolinaWhen I was 3 years old my dad bought a 1956 Chevy sedan as a project car. The two of us spent almost every night in the garage restoring her. It only took about 10 years to get done, but when it was finished she was prefect ... read more Heavy Duty Truck RepairJacob CorreiaDiesel Mechanic at MP EnvironmentalYuba City, CaliforniaI was born and bred to work with my hands. I come from a long line of mechanics and fabricators that keep this country rolling. I got into my line of work because I was fascinated with how everything worked. When I turned 13... read more ManufacturingMadison IsbellFloor Jack Assembly Production Associate at Snap-onElkmont, AlabamaWe all push each other to do our best and we work really well as a team.
ManufacturingMike GougePolishing Operator at Snap-onElizabethton, TennesseeYou know it's a great feeling when you're actually in your groove and you know you’re doing it right.
ManufacturingKatherine NguyenRepair Technician at Snap-onSan Jose, California
ManufacturingMauricio ArizmendiMechanicKenosha, WisconsinI’ve always felt drawn to engineering and power tools. My dad used to own a tooling shop and because of that I grew up around an industrial environment. Working with big, hot, heavy machinery requires durable and reliable to... read more Automotive - General RepairVictor "Billy" AndersonHead Technician at VA Auto ServicesMaplewood, New JerseyBack in Jamaica, my father told me I couldn’t drive a car until I first learned how to fix one so I would appreciate it. I enjoy the work. It’s challenging but good. You meet different kinds of people, different kinds of car... read more Technical Education - students and instructorsJohn IngramLeader of Reclaim, Rebuild, Restore Project. at UNL Innovation CenterLincoln, NebraskaI use the equipment here to build tables for flood victims. People donate the wood. When someone tears down a house or a building, we get the wood. I build the tables and Habitat for Humanity will figure out where to send th... read more Aviation/AerospaceSam MeyerA&P MechanicLouisville, KentuckyI’m a 35 year old hot woman’s husband, aircraft mechanic, chef and craft beer enthusiast. I worked in restaurants for most of my life. I knew it wasn’t something I wanted to keep doing. I’ve always loved airplanes and aviati... read more Automotive - Specialty ShopBrayden FinchumOwner Auto Mechanic at 66 Salvage RestorationClinton, IllinoisHello everyone I am your friendly everyday greaser specialty performance mechanic. Whether it is rusty gold treasure that needs rebuilt, an engine that needs that extra bang for its bucks, even redoing old gas pumps and cool... read more Automotive - Specialty ShopMichael Van OrdenMaster Technician at Moonshine Harley DavidsonFranklin, TennesseeI have been into motorcycles my whole life and love working on them. At Moonshine I make big power for Harley's and have fun on Instagram and YouTube talking about it. I have hand built a few and won shows but building the b... read more Automotive - Specialty ShopNader Alsabbah12 Volt Mobile Electronics Installer at Sound on WheelsKenosha, WisconsinMy story starts with my father. He moved to the US when he was 17 with only $70 in his pocket. He went to college got his degrees and took over the shop. From there he became very successful in this business, he has owned th... read more Automotive - Specialty ShopMark DenlingerFabricator/ Metal shaper at Ludwig's Custom AutoAkron, PennsylvaniaI got interested in classic cars at a very young age from my dad who had a couple 55 Chevy's when he was younger. I started working in a body shop where I lived in Vermont at 11 years old. I was looking for a job and saw an ... read more Automotive - General RepairDiana RamosHead Technician at Village AutoSouth Orange, New JerseyI used to get in trouble a lot as a kid, I was always taking things apart. When it comes to cars, I am completely self taught. There’s a perception that female techs can’t handle the tough jobs. I want you to know I take car... read more Automotive - DealershipKevin ChukwurahService Technician at Millburn AudiMillburn, New JerseyMy first job was at a gas station, I started working on cars. Then I realized there were shops like Audi where you’re inside warm and dry all day. I applied and I got the job. I have been here for 6 years. As a boy I loved L... read more ManufacturingSharon KaulMachine Operator at Snap-onMilwaukee, WisconsinI thought maybe I was at an age where I wouldn’t learn anymore, I’d just coast. But then I went into machining and I felt challenged. I’m still learning every day.
Automotive - General RepairBernie GriecoShop Owner at Bernie’s Tire & Auto CenterMillburn, New JerseyOriginally my father owned a shop and Bernie owned a second shop, then we decided to combine and move into our current location with 5 lifts. I have been in this current location for 30 years, and now my son is a 3rd generat... read more Motorcycle RepairMike MeredithLead Test Mechanic at Harley Davidson Motor CompanyYucca, ArizonaI was working as a flat rate mechanic and got the opportunity to work as a contractor at a test facility working on prototype motorcycles. I then got into the durability testing. I have worked for some of the best mechanics ... read more Power GenerationKenneth LivermanLineman at Electric cooperativeAhoskie, North CarolinaLove Snap-on, grew up with your tools. I love to turn wrenches although it's not my day job. Just wanted to start my daughter off right made her a dresser out of her first toolbox.
Aircraft MaintenanceElena GonzalezAircraft Technician at American AirlinesMiramar, FloridaI am an aircraft maintenance technician for a major airline. I always wanted to fly. I flew my first aircraft before I drove my first car. Then when I was in high school, aircraft maintenance was offered to me and I said “le... read more Automotive - DealershipEdwin RosasService Technician at Millburn AudiMillburn, New JerseyI didn’t mean to get into the auto industry. I wanted to get into engineering but auto tech seemed like an easy way in so I did it as a starter job and never left. I have been a tech for 17 years. What I like about being a t... read more ManufacturingRamel GuardUtility Operator at Snap-onMilwaukee, WisconsinEvery time I go to a car place and see our tools, I get to say, man, I work there.
Fleet MaintenanceMichael VecchioneFleet Mechanic / Firetruck MechanicDunedin, FloridaHello, my name is Michael Vecchione. I have been in the automotive industry since 2013. I started off working at a BMW dealership, then move to a Hyundai dealership, eventually ending up at the city that I currently work at.... read more Fleet Mechanic, Public TransitMatthew LarsonDiesel Mechanic at Berkshire Regional Transit AuthorityLee, MassachusettsMy dad and uncle taught me most of what I know. My uncle owns a local European specialty repair shop and my father has worked at the DPW in my town for almost 30 years. I've been working as a mechanic for around 8 years now ... read more Technical Education - students and instructorsMike BeliveauInnovation Studio member, Navy veteran at UNL Innovation CenterLincoln, NebraskaI worked on F18s in the Navy, working on board ships, on aviation electronics. I did that for 10 years. Then I worked on accelerators used to treat cancer. My job took me from New York to Omaha. I had a PTSD problem and I wa... read more Automotive - DealershipTravis RuizTeam Leader/Master Audi Tech at Audi DominionSan Antonio, TexasI got into this line of work because a family member worked at a Volkswagen dealer and was able to get me an interview with the manager. I was able to obtain a job as a Volkswagen technician and proceeded to work my way up a... read more Automotive - DealershipSteven RettingerChrysler Diesel Tech at Brickner Park CityEdgar, WisconsinI am a certified Chrysler diesel tech working to support my wife and 5 kids. The coolest project I have worked on was a head job on a 16 Ram 1500 eco diesel.
Steel FabricationTaylor GallagherWelder/FabricatorBozeman, MontanaI have always been interested in metal as a medium. It's strong, beautiful, and versatile; you can do anything with it. I saved up all of my money to buy a little mig welder when I was 19, but I had no idea what would become... read more ManufacturingPriscilla HarrisPrybar Assembler at Snap-onElizabethton, TennesseeIt's very important to me to send out good quality. It makes me proud when I finish something and see how good it looks and think, "Wow, I created that tool!"
Automotive - Specialty ShopNick FediukElectrical Euro Tech at Auto Boutique ChicagoChicago, IllinoisI got into my line of work by blowing up my moms car. She had to have engine replaced twice because we were all young once right? Anyways I saw the cost of repairs and said I want to be the person that helps people with thei... read more Stonework/MasonryBryce HollingsworthDry Stone Waller at Stone Bear HardscapesNorthampton, MassachusettsGrowing up I had always been active, been an athlete, and worked manual labor jobs off and on. I always liked those jobs, but I had always figured that they were temporary, that I wasn't "supposed" to do that with my life. A... read more ManufacturingRon MyerDepot Repair at Snap-onConway, ArkansasI try to be the best I can be. I always try to learn and study to stay at the top of my field.
Automotive - DealershipChelsea DodgeAutomotive Technician Apprentice at Spradley Barr FordGreeley, ColoradoI had a dream of opening up a shop where everyone, men and women, can have utmost trust in their technician and that their car will be fixed correctly for a fair price. I also want to make sure the shop is comfortable to wor... read more Automotive - General RepairChris GriecoService Technician at Bernie’s Tire & Auto CenterMillburn, New JerseyI started out in my dad’s shop, then I tried construction, but I came back to working on cars because I could work near home. In the future I hope to take over my dad’s shop and expand the business by getting into performanc... read more CyclingJason NixonBike MechanicRoyal Oak, MichiganI've been making and fixing things since I was a child, I've always loved taking things apart and cycling. I enjoy the challenge of fixing anything that is broken. Being able to fix things has always been a passion of mine. ... read more Heavy Duty Truck RepairBrian BeckerHD Diesel Mechanic at King CountyKent, WashingtonFor 17 years I was a professional chef. I worked for large corporations and I also had my own personal chef business. Then I decided to go back to school to get an Associates in Heavy Duty Diesel Technology. I became the die... read more ManufacturingTony ChurchProduction Support Manager at Snap-onElizabethton, TennesseeThere's not a lot around here that I haven't done. I love the tools. I've seen all the changes that's been made in this facility and and I know it's a great company.
Automotive - Specialty ShopBlake BochnicekFabricator at Big Rig Truck n TrailerPapillion, NebraskaStarted in high school, bought a 52 Dodge M37 Military truck and started to restore it. Soon I found myself graduating and going off into the Army as a "Wheeled Vehicle Mechanic" where I used and acquired some of my first Sn... read more Automotive - DealershipBrian ConwayShop Foreman at Millburn AudiMillburn, New Jersey
ManufacturingJerry ScottForming at Snap-onLouisville, KentuckyDo the work well and know it's right or make it right. Be proud of your work. I always felt I could hold my head pretty proudly on that point.
ManufacturingTim RickeForm and Weld Leadperson at Snap-onAlgona, IowaEverybody compares themselves to Snap-on. That's the biggest compliment you can get.
Automotive - General RepairTim SchwuchowShop Owner at Pfeiffer TransmissionWinthrop Harbor, IllinoisI love this work. It’s the challenge of fixing something that’s broken. I pushed a broom at this shop when I was a kid. Years later, I got a job from Mr. Pfeiffer and learned how to fix a transmission. When the opportunity c... read more Heavy Duty Truck RepairJeffrey RossDiesel Technician at Cleveland Brothers Equipment CompanyCenterville, PennsylvaniaMy grandparents owned a small local used car dealership and repair facility. I painted my first car at the age of 10, rebuilt my first engine at the age of 12. Ever since I've been destined/ cursed in this ever growing and c... read more ManufacturingMatt PattersonDesign Engineering Manager at Snap-onMurphy, North CarolinaI like the whole development process. Going from beginning to end and giving the customer exactly what they want is really rewarding.
Automotive - General RepairRicardo MartinezShop Owner at National AutoChicago, Illinois
Automotive - General RepairDoug GrahamShop Owner at Pfeiffer TransmissionWinthrop Harbor, IllinoisThis is a family business. For us, it’s all about being responsible and reliable. We’re people that just want to help other people. We all care and want to help get people moving again. My son has a love for the automobile, ... read more Automotive - Specialty ShopDavid FloresTechnician at Bimmer WerkshopChicago, Illinois
Construction Equipment RepairMatt BrownHeavy Equipment Tech at Modern MachineryKent, OregonI always took pride in mechanical things and always enjoyed getting dirty. And the bigger the equipment the better it is in my eyes. I have been a mechanic since I was 15. I always took pride in working with my hands. Moved ... read more Automotive - General RepairErnie IsleyShop Owner at Ernie's AutoZion, Illinois
Fork Lift repairBrian FowlerField Technician at CrownNorthglenn, ColoradoMy Grandpa owned and operated Lloyds automotive repair while I was growing up. My dad works on and repairs commercial laundry equipment. I was always interested in repair and mechanical things. I went to tech school and then... read more HobbyLouis TarantinoCarpet Source at Carpet SourceWinter Park, FloridaI grew up working with tools more then toys, when I was 13, I would go with my best friend to his dads shop to clean and put his tools away. That's when I learned Snap-on made the best tools. Tools are my passion and not my ... read more Automotive - General RepairJosh WestendorpTech at Jamestown Automotive INCHudsonville, MichiganWith my Dad owning an Automotive Repair shop it’s not hard to see why I’m in the industry. My passion for learning has fueled my drive in the industry to keep up with the new technologies and adapt to the challenges those br... read more Automotive - Specialty ShopRyan TrejoShop Owner at Bimmer WerkshopChicago, Illinois
ManufacturingRhonda TranthamProduction Line Worker at Snap-onMurphy, North CarolinaWorking specialty tools is the hardest line I’ve worked, but it’s rewarding; it requires a lot of thinking, which I like.
Automotive - General RepairJosh BrantleyTechnician at Quality Auto ServiceFort Worth, TexasI’ve always had an interest working with tools, started out working on my bicycles as a kid, then around 13 years old I got bit by the car bug! I loved helping my dad in the garage working on his Trans Am, and I learned a lo... read more Automotive - General RepairRichard HobsonOwner at AAMCO Transmissions and Total Car CareLincoln, NebraskaI was in a corporate job and I was also a hobbyist working on cars. I thought if I’m going to play with cars at night I might as well get into the business. I bought this shop in 1986. I love being able to help people. I fix... read more Automotive - Specialty ShopNelson PerezShop Owner at Bimmer WerkshopChicago, Illinois
Motorcycle RepairJohn ZahllerOwner at JZ MotorcycleLincoln, NebraskaI told my high school guidance counselor that I liked motorcycles and she sent me to Southeast Community College. I’ve been working on bikes ever since. I opened this shop in 2002 and I specialize in Japanese motorcycles - m... read more Automotive - General RepairKevin GracomMechanic at Shelley's Precision Auto CenterCamarillo, CaliforniaAs a kid around 10 years old I loved to take things apart and see what made them work. My dad always had to put them back together after. It was a great day for everyone when he taught me how to put them back together. Event... read more Aviation/AerospaceJenna CadwalladerFlight Technician / A&P student at NASA Jet Propulsion LaboratoryNorthridge, CaliforniaWhen I was 16, I wanted to be a psychologist. I didn’t know much, if anything, about aviation. There was a flyer at my high school advertising an “Aviation Career Day” field trip at Van Nuys airport. It was scheduled on the ... read more Automotive - General RepairFrancisco MartinezShop Owner at National AutoChicago, Illinois
MiningAdam BergeronUnderground Mine Field Technician at Nevada Gold Mines, Cortez UndergroundElko, NevadaBorn in so cal, fell in love with motorcycles. Raced them through high school. Went to MMI in Arizona. Moved to Vegas, worked at bike shops for 4/5 years. Moved back to Cali and started in heavy equipment repair as a field t... read more Automotive - DealershipJuan TovarService Tech at Park Place Lexus PlanoFrisco, TexasMigrated from Mexico in 1995. Worked in the food industry and then moved in to commercial construction. I remember watching HorsePower TV and Trucks with Stacy David on TNN (before if became SpikeTV). Even though I didn’t sp... read more Aviation/AerospaceRyan JenkinsA&P Mechanic at StandardAeroNew Ellenton, South CarolinaI was talking to an old family friend at a party about his career. At the time he had just left an aircraft charter company that he was the maintenance director for and suggested that I give aircraft maintenance a shot. I wa... read more Fleet MaintenanceEdward StokleyForeman/Mechanic at Estes Express LinesGreeneville, TennesseeGrew up around trucks, always worked with my hands, loved to tear things apart and put them back together. So here I am!
Material handling/heavy truck/constructionDustin SellersRoad Service Technician at Southeast Industrial EquipmentCharlotte, North CarolinaI followed in my Dad's footsteps, after he spent 22 years in the Army as a mechanic and instructor. All mechanical and electrical was self taught. My Dad taught me what a strong work ethic was. I'm am now currently a Silver ... read more Automotive - General RepairChris KeoughTechnician at Ernie's AutoZion, Illinois
MiningZachary BarkerWelder/ Machinist at Wyoming Machinery CompanyRock springs, WyomingHello my name is Zach Barker and I'm 22 years old! My boss hired me as a welder/machinist 3 days after I graduated from Eastern Wyoming college in Torrington, WY with all of my welding papers and machining certificate. I wor... read more Technical Education - students and instructorsKyle BeaversStudent at Aims CollegeGreeley, ColoradoI entered into the field as it’s a part of my family’s history – “It’s the family trade”
Automotive - Specialty ShopJaycie CochranOwner-Technician at FTM Diesel & Off RoadPoint Arena, CaliforniaMy first job as a youngster was working at a family friends trucking company. I helped with office tasks and one day was delivering a message to the truck shop and the mechanic had me give him a hand with something, I was ho... read more Automotive - General RepairBrenton LyonsShop Manager at Bryan's GarageChicago, IllinoisI have been at the shop since 2008. The service writing takes up about 80% of my time, the other 20% is filling-in in the garage. Prior to working at Bryan’s Garage, I was a truck driver.
Parts storeDaniel KainParts Sales Manager at AutozoneCottage Grove, OregonI'm 26 years old I work at an AutoZone and no I'm not a professional technician, however I do work on cars very often. Sometimes in the parking lot of our store if it’s something not too involved and others in my driveway af... read more Agriculture Equipment RepairCraig MarloweField MechanicGoldsboro, North CarolinaI grew up with my dad and one older brother always turning wrenches on something. I started working on construction equipment but I had wanted to be a diesel mechanic for as long as I can remember. The coolest project I've w... read more Automotive - Specialty ShopAlex PerzTechnician at Vengeance RacingCumming, GeorgiaI always had a passion for cars. My father was an auto technician and I always would go to work with him and work on things at home with him. After taking auto in high school, I went on to a local community college and took ... read more Heavy Duty Truck RepairLaina StashekHeavy Truck Technician at ScaffidiNekoosa, WisconsinI grew up on a small dairy farm, went through high school milking cows. I had my daughter young right before I graduated high school. Started working on Harvestore silo unloaders and loved the mechanical. Though I couldn't d... read more Automotive - Specialty ShopCory MichalskiTechnicianSalem, OregonMy cousin was an avid aircooled VW nut and got me hooked in high school - now I've been working 17 years on Volkswagen & Audi vehicles. A 356B restoration was one of the coolest projects I've worked on.
Automotive - General RepairBrandon LeatherwoodTech at Total Auto and TireConway, Arkansas
Technical Education - students and instructorsFred BrownDirector at Aims Community CollegeGreeley, ColoradoThe President of Aims, asked me why we didn’t hire any of the graduates from their program at the Ford dealership. I had to tell her that the students didn’t have the technical skills needed in the industry. The President th... read more Automotive - General RepairKevin NeitoOwner at Mobile TechSan Diego, CaliforniaMy grandpa was a mechanic, and my dad owned a shop, but I hated getting dirty - so I was more drawn to the diagnostic side of things. Now that's all I do.
Automotive - Specialty ShopKeith ElliottLead MECP Advanced Installer at BestbuyPhiladelphia, PennsylvaniaWhile in high school I loved cars with loud music and me being the educated buyer I tried to learn about the equipment I wanted to buy. Well long story short I fell into 12v installations, little did I know I would make a ca... read more Automotive - General RepairNate GoldboldTechnician at Pfeiffer TransmissionWinthrop Harbor, Illinois
Fleet MaintenanceTrace BristerTractor Trailer Mechanic at Prime Inc.Willshire, OhioMy family has always been in the trucking industry. My father and 2 of my older brothers are all still part of it. My dad has 45+ years in the industry along with my grandfather who had 60+ years. All of us love wrenching an... read more Automotive - Specialty ShopMike LyLead Technician at The DrivewaySan Jose, CaliforniaMy father escaped Vietnam to America for a better future, he jumped in the workforce as a mechanic and I followed as well during my childhood. I worked at a general repair shop with the passion of racing and engineering quir... read more ManufacturingNick SimsTool and Die Maker at Snap-onElkmont, AlabamaWhy do it if you're not going to take pride in it?
Heavy Duty Truck RepairBarry LoyShop Foreman at Navajo Exp.Denver, ColoradoI got into this industry because I was ready for a change and I always had a love for wrenching. I changed my life after many years of abuse and I’m a recent Lincoln Tech graduate. I got a job at Navajo exp. and became forem... read more Aviation/AerospaceTimothy SmithAircraft MechanicNewburgh, ConnecticutWhile in high school I started working in aviation loading and unloading aircraft. From there went to working line service for corporate aviation while going to school to get my A&P. After schooling went to work for a MRO an... read more Construction Equipment RepairFrancis SolanoDiesel Tech at R&L ExcavatingSweet Home, OregonStarted off in basic automotive out of high school, but I had no luck getting a job in the shop. After some years went by I became a school bus driver, but realized that I needed to go back to college and move up as a diesel... read more Automotive - DealershipPaul SchmidtParts Advisor at Palmen ChryslerKenosha, WisconsinI have been working in parts for nearly 25 years.
Heavy Duty Truck RepairDoug McGheeDiesel Tech. at Waste ManagementCharleston, West VirginiaMy story began when I was a young boy. Around the age of 8 I would take my toys apart to see what made them work, this continued for a few more years then came the idea if I can take it apart can I put it back together and ... read more RailJosh ParrowLocomotive Technician/ Rapid Responder at BNSF RAILWAYHavre, MontanaI grew up in the small mining and ranching town of Whitehall, Montana. When I was in 8th grade I remember my Dad and my Grandfather both talking over dinner one night about how I should be a diesel mechanic they both knew I ... read more Automotive - DealershipAustin SoderholmTechnician at Lynch ChevroletKenosha, Wisconsin
EngineeringRachael WagnerVirtual Incision Engineer at UNL Innovation CenterLincoln, NebraskaI started making stuff with my dad when I was little. He was a shop teacher. I always wanted to be an engineer. I like fixing things, solving problems. I got involved in the innovation space here when I was a junior. They ta... read more Automotive - General RepairKaran DriehuysGeneral Service Technician at Chapel Hill Tire WoodcroftChapel Hill, North CarolinaI started working on my personal Acura when I was in high school, and my interest was only strengthened when people started asking me to fix their cars. After high school, I began work as a General Service Technician at Chap... read more Construction Equipment RepairPhil DelazioTech at Highway Equipment and Supply CoKelayres, PennsylvaniaMy dad always had me around equipment as a kid. And he always was with or on equipment. I fell in love with big iron from the start. I have been in the field for 10 years, I started as a factory representative for a drill ri... read more Automotive - General RepairJosh SummersAuto Technician at Cadwell's CornerPlainfield, IndianaI have a passion for cars and pickups, I started at the bottom of the industry doing tires and oil changes working for the local pep boys. I left that to better my skills working on big truck trailers. And I decided to go ba... read more Automotive - Specialty ShopKevin CollinsMaster Tech at GoodyearWesterville, OhioMy buddies and I were all car guys in high school. We all went to the same Auto Technology school and worked at the same machine shop after classes 34 years ago. I was a General Motors master tech for 22 years, I've been an ... read more Automotive - DealershipAndy HuhnParts Manager at Lynch ChevroletKenosha, Wisconsin
Automotive - General RepairPaul LoweryMechanic at Westlake Auto and TireMount Holly, North CarolinaI started working on old cars with my father when I was 6. At the time it was “here son hold this light right here for me” I’d never hold it in the right spot for him. Then over the years I kept helping him after school maki... read more Construction Equipment RepairKyle JohnsonTechnician at KOMATSUGilbertsville, PennsylvaniaI'm a third generation heavy equipment technician, and have been in this field for almost 16 years. My grandfather repaired equipment for a gold mining outfit in Alaska and my father is a field technician for a local contrac... read more Small Engine RepairWill SollazzoMechanic at Will and Joe's Small Engine RepairCleveland, OhioI've always had a love for Snap-on tools, my father used your tools for 30 years and I've been using your tools for 12 years. I've always loved fixing things. I'm a small engine mechanic and fix up my own cars and trucks, we... read more Auto Body/Collision RepairAubree HollowayAuto Body Technician at Wayne's Paint and BodyUmatilla, FloridaI’m 18 years old, I got into this line of work because I grew up around it my whole life. I grew up around my grandparents shop in Mount Dora called Bales and Langley towing. I used to have my own little tow truck. My father... read more Heavy Duty Truck RepairKarla CorchadoDiesel Technician at Metroplex Diesel and AutoBalch springs, TexasI started when a friend of my moms gave me the phone number of his manager at auto city in Dallas. I had to called the guy about 20 times over a few days before he picked up. I told him I didn’t know much but all I needed wa... read more Automotive - DealershipAlejandro AraizaTechnician at Land Rover DallasDallas, Texas
Technical Education - students and instructorsDavid MartinDirector at UNL Innovation CenterLincoln, NebraskaI was a journalist and I was a member here - I would work on screen printing and I loved that. When this position became available, I decided to honor my passion. I have a good relationship with the judges. I’ve shown how go... read more Automotive - General RepairBobby DwigginsTech at Jones AutoConway, Arkansas
MarineElizabeth MonahonDiesel Marine Technician at Billings Diesel and MarineStonington, MaineNothing holds me back, apart from the attitude from other people.
Automotive - DealershipAdrian InocianTechnician at Palmen ChryslerKenosha, Wisconsin
Jewelry DesignAnaliese StinsonJewelry Maker at Tiffany'sNew York, New YorkI really like the history – the craft has been around for so long. There’s always more to learn and skills to perfect. I’ll never be the best and I’ll never know everything, but I’ll always try to get better.
Automotive - General RepairJozef BeckettTechnician at Dan's RepairMedinah, Illinois
Automotive - DealershipDustin ReaganDiesel Technician at Serra ChevroletNorth Canton, OhioStarted out young, my grandfather started teaching me at 10 years old. My story is simple. I grew up wrenching on things and then spent 7 years in the military where I continued to work on things in my spare time. While depl... read more Heavy Duty Truck RepairZach RauschenbergerTech at Western TruckGreeley, Colorado
Fleet MaintenanceMatt WilliamsTech at USAirport ParkingDenver, ColoradoI have a son who became disabled after an accident. Bob Purvis was my dealer at the time, he heard about the accident and got the word out about a “Go Fund Me” page that was created for my son. Quite a few dealers actually d... read more Automotive - General RepairSergio SorianoTechnician at Smitty'sSan Diego, CaliforniaI started repairing cars straight out of high school, so I started buying tools then. My Father was a mechanic and had a shop and he passed on his tools to me. At first I wanted to be an engineer. Now I fix what engineers s... read more Automotive - DealershipTim WoolumsTechnician at Honda of KenoshaBristol, WisconsinI have been working as a service tech at Honda of Kenosha for 5 years.
Heavy Duty Truck RepairJuan FloresTransmission Technician at Valley Power SystemsBakersfield, CaliforniaMy story is quite an interesting one, I work for Valley Power Systems Inc. They are a in the powering industry that includes on highway, off highway heavy duty equipment. My job is a Transmission Technician, I work on Alliso... read more Technical Education - students and instructorsMax WheelerInstructional Designer at UNL Innovation CenterLincoln, NebraskaI’ve been doing woodworking since middle-school. After I graduated, I spent all my money on tools. My basement is full of wood tools -- a table saw, a band saw, drill press, lathe. My favorite tool is the wood lathe – I make... read more Agriculture Equipment RepairMathew McGinnisService Tech at John DeereBrookhaven, MississippiMy uncle brought me to his job when I was a kid and I strived to be just like him. I started detailing trucks at a shop in Oklahoma, and eventually started to help fix them when there wasn’t anymore cleaning work for me. I s... read more Heavy Duty Truck RepairJim DyerForeman at Western TruckGreeley, Colorado
Automotive - DealershipAlex KostermanTechnician at Palmen ChryslerKenosha, WisconsinIt would be cool to see a red, white and blue Master Series box for the 100th.
ManufacturingJeremy AndrewsOwner at Hoyt Pallet Recycling Co., IncHoyt, KansasMy father started this business in the early 90s I grew up working on trucks and equipment. We never really had anything nice but I purchased the business in 2016 and since updated our fleet of trucks and equipment to newer ... read more Agriculture Equipment RepairMichael KlenzTechnician at Case IH/CNHAlgona, Iowa
Automotive - General RepairWilliam DayService Writer at Complete Auto RepairLouisville, KentuckyA Snap-on tool feels good in your hand and it's beautiful. It’s a like a jewel of quality and finish.
Construction Equipment RepairBrandon SwisherField Service Technician at Power Motive CorpDenver, ColoradoI grew up working on trucks, and when I graduated high school I knew I wanted to be a diesel mechanic. I went to school and was hired by the company I currently work for. The coolest project of worked on is replacing an engi... read more Heavy Duty Truck RepairKyle KauffmanTechnician at JX PeterbiltWadsworth, IllinoisLove my EPIC tool box and ¾ drive ratchets.
Jewelry DesignKestrel FleischnerJewelry Design Student at PRATT DesignNew York, New YorkI really like working with my hands and jewelry design really just clicks as a form of expression for me. I feel it combines a lot of different artistic skills with technical skills.
ManufacturingRyan DietchAssembler at VermeerPella, IowaSnap-on talks to customers, gets input on how tools perform, and is always asking if there are problems or if anything that could be done better.
Construction Equipment RepairTyler BrenService Technician at RDO EquipmentDickinson, North DakotaAs a young kid, my grandfather had a tractor repair shop. I would help him with little jobs (changing spark plugs, changing oil, putting parts away, etc) and as I grew up he would teach me about electrical, how everything wo... read more Agriculture Equipment RepairHunter BrewerJohn Deere Technician at Tennessee TractorMartin, TennesseeWhen I was in high school I found out about the John Deere Tech Program and started doing research and when I graduated high school at the time wasn’t able to go because I didn’t have the funds to go to school and buy tools.... read more Automotive - DealershipSamuel CruzTechnician at Lynch ChevyKenosha, Wisconsin
Aviation/AerospaceBen TownsendLead Tech at Dumont MROBloomington, IllinoisI started working in aviation at 19 and been in love with it ever since. Even with all the ups and downs and time away from home I still get the thrill of working with my hands to watch an aircraft fly away safe.
Motorcycle RepairLiana AcevedoMotorcycle Technician at Motorcycle MallStockholm, New JerseyI’m Liana, a 22 year old female from a small town in New Jersey. When I was younger, I saw motorcycle racing on TV one day when I was 12 years old. After that, I fell in love with motorcycles and became fascinated in riding... read more Construction Equipment RepairChristian BeyerHeavy Equipment Diesel Technician at Fabick CaterpillarEau Claire, WisconsinOut of high school I followed a previous classmate of mine through the FABTECH program, a CAT specific tech program developed and run by the dealership I now work for. That took just under a year to complete after which I st... read more Technical Education - students and instructorsLiam KendrickStudent at Aims CollegeGreeley, Colorado
Technical Education - students and instructorsJerry ReifShop Manager at UNL Innovation CenterLincoln, NebraskaI had jobs in construction and manufacturing including Duncan Aviation and TMCO Manufacturing. Then I came on here and helped design this maker space. This is a culmination of everything I’ve ever done in in my life – design... read more Commercial / industrial floor cleaning equipmentJason QuickField Service Lead at KarcherBrighton, ColoradoAs far back as I can remember I have always torn stuff apart to figure out how things work. I grew up working on a farm repairing tractors and taking care of the animals. I married my high school sweetheart and had two wonde... read more Automotive - General RepairGiuseppe VerniceTechnician at Smitty'sSan Diego, California
Automotive - General RepairSam BurgenerTech at Total Auto and TireConway, Arkansas
Automotive - General RepairOscar RamirezTechnician at Ernie's AutoZion, Illinois
Technical Education - students and instructorsKaycee GoodrichStudent at Aims CollegeGreeley, ColoradoI entered the field as it’s a part of my family’s history. I am currently working on my own pickup.
Heavy Duty Truck RepairRichard Acecil IIITechnician at JX PeterbiltWadsworth, Illinois
BlacksmithingShawn MoulenbeltBladesmith at 51 Bravo Custom KnivesWayland, MichiganI enlisted in the army out of high school. My military occupational specialty is 51 bravo Carpenter and Mason. I have been involved in construction my whole life and enjoy meeting with customers and bringing their visions to... read more Automotive - DealershipCyndi PickleServ. Director at John Elway ChryslerDenver, ColoradoIn the late 90’s and early 2000’s, service managers were sometimes loud, abrupt, direct, and told you when you messed up. I feel it’s important to calmly discuss the problems and course correct with a firm yet gentle style.
ManufacturingJordan KrebsApplications Engineer at Snap-onConway, ArkansasIt makes me proud to know our team is capable of great things.
Automotive - General RepairCameron LaffertyTech at Complete AutoLouisville, Kentucky
Automotive - Specialty ShopKevin HeltonParts Tech at O'Reilly AutoPleasant Hope, MissouriI have been interested in classic cars and trucks since I was young. My grandfather was a diesel mechanic in the 60s and 70s. By the time I was born I grew up playing in my grandfathers personal salvage yard, pretending behi... read more ManufacturingTom FaberOwner/Machinist/Fabricator at Faber CycleCedar Springs, MichiganI took an apprenticeship in Tool & Die in 1980, and by 1886 had my own machine shop where we built tooling for automotive stampers, and tube fab suppliers to Ford and GM. In 1999 I sold this shop and started my current busin... read more ManufacturingMatt ShermanAssembler at VermeerPella, IowaPeople choose Vermeer because it’s the best quality, Snap-on’s the same way -- people choose it because it’s the best quality. If I have a choice, I’m going to choose Snap-on.
Automotive - General RepairJake JacobsonOwner at Little Car ShopSan Diego, California
Automotive - General RepairBrian LuGrainTech at AAMCO TransmissionsLincoln, NebraskaMy family owned a junkyard and I grew up tearing cars apart. I love the challenge of putting things back together, it’s like a puzzle. I had a 1989 Cutlass that I took apart and put in a 400, gave it some real power.
FabricationWillie SalasDesigner at El Guapo FabricationSan Antonio, TexasI started off in the fabrication hobby when I was 13 years old, and I built a 1923 Ford model T Touring with help from my father and brother. I’m now 50 and have a small metal fabrication company which I have grown into a pr... read more Heavy Duty Truck RepairSana AndersonDiesel Fleet TechJohnsburg, IllinoisI am a female diesel fleet tech trying to learn as much as I can. I originally started in cars, then went into HVAC to try something different, now I work on semis, diesel, trailers etc . I want to learn as much as I can in ... read more Heavy Duty Truck RepairKen JoiakTech at Windy City Truck RepairAddison, Illinois
Automotive - DealershipDaniel TateTechnician at Lynch ChevroletKenosha, WisconsinI used to work on transmissions at AAMCO.
Jewelry DesignManuel CoronelJewelry Maker at Tiffany'sNew York, New YorkI’ve been doing this for 35 years. I started when I was Ecuador – when I was a boy I used to play with rings so when I was 16 I went to school for jewelry for 6 months. I came to the US when I was 24 without a job, but the n... read more Heavy Duty Truck RepairRyan MeppelinkDiesel Technician at InontimeZeeland, MichiganI started out working on a ‘97 Mopar 360, the engine in my dad’s old truck. My older cousin was studying diesel mechanics, and helped my father and I do a complete overhaul. We were successful, and I was officially hooked. A... read more ManufacturingJohn LewterAssembly Team Lead at Snap-onElkmont, Alabama
Aviation/AerospaceEric CornellAircraft Mechanic at United AirlinesSan Francisco, CaliforniaA plane isn’t like a car. If you have engine trouble in the air, you can’t just pull over to the side of the road.
Jewelry DesignMorgan FerwedaJewelry Design Student at PRATT DesignNew York, New York